Download INSTALLATION INSTRUCTIONS

Without Moonroof and With Hands Free Link
INSTALLATION
Customer Information: The information in this
installation instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
“do-it-yourselfers.”
1.
•
Remove the map light console (unplug two
vehicle connectors).
2 VEHICLE
CONNECTORS
FRONT
4 RETAINING
TABS
RIGHT MAP
LIGHT LENS
Disconnect the negative cable from the battery.
If the vehicle is equipped with map lights, go to step 2,
otherwise go to step 3.
2.
Remove the left and right lenses from the map light
console (four retaining tabs for each lens). Remove
the two bolts.
MAP LIGHT
CONSOLE
With Moonroof
•
BOLTS
Remove the map light console. Then unplug
three vehicle connectors, and remove the switch
(four retaining tabs).
4 RETAINING
TABS
LEFT MAP
LIGHT LENS
Q082401CK
Without Moonroof and Hands Free Link
3 VEHICLE
CONNECTORS
FRONT
•
4 RETAINING
TABS
RIGHT MAP
LIGHT LENS
Remove the map light console (unplug the
vehicle connector).
VEHICLE
CONNECTOR
MAP LIGHT
CONSOLE
FRONT
4 RETAINING
TABS
RIGHT MAP
LIGHT LENS
MAP LIGHT
CONSOLE
2 BOLTS
4 RETAINING
TABS
LEFT MAP
LIGHT LENS
4 RETAINING
TABS
SWITCH
QA21705AH
LEFT MAP
LIGHT LENS
BOLTS
4 RETAINING
TABS
2 of 12
AII 45605 (1104)
Q0D0422BH
© 2011 American Honda Motor Co., Inc. – All Rights Reserved.