Download Operator`s Manual

plate. Remove the mounting nut, inner cover
and air cleaner element. Wipe off dust and debris from the air cleaner base.
5. Install the new paper element and secure it
with the inner cover and mounting nut. Tighten
the nut 1-1/2 turns after seating it on the cover.
Reinstall the foam wrapper and outer cover.
PAPER & FOAM
M1845-1
MOUNTING TABS
(DO NOT TWIST)
COVER
FIGURE 11. AIR FILTER REPLACEMENT, GENSETS 4.0 KW AND BELOW
AIR CLEANER
ASSEMBLY BASE
OUTER
COVER
FOAM
WRAPPER
QUARTER−TURN
FASTENER
SEAL
AIR CLEANER
ELEMENT
INNER
COVER
MOUNTING
NUT
M−2010
FIGURE 12. AIR FILTER REPLACEMENT, 5.0 KW AND 6.0 KW GENSETS
Redistribution or publication of this document,
19
by any means, is strictly prohibited.