Download KV-HA21M80_BG-2T2015-05-09 00:302.9 MB - Wiki Karat
Transcript
REVISION HISTORY MODEL PART NO. : BG2T CHASSIS 9-872-344-01 KV-HA21M80 NO. SUFFIX DATE SUPP / CORR 1 -01 2002/10 __ DESCRIPTION 1st Issue SERVICE MANUAL MODEL COMMANDER DEST. KV-HA21M80 RM-969 CHASSIS NO. MODEL BG2T CHASSIS COMMANDER DEST. CHASSIS NO. Pakistan 1 2 4 5 7 8 3 6 9 - 0 JUMP SOUND MODE 2 PROGR SPACE SOUND TV TRINITRON® COLOR TV KV-HA21M80 RM-969 SPECIFICATIONS Note Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G, I, D/K, M Color system PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43 Channel coverage B/G VHF: E2 to E12 UHF: E21 to E69 CATV: S01 to S03, S01 to S41 I UHF: B21 to B68 CATV: S01 to S03, S1 to S41 D/K VHF: C1 to C12, R1 to R12 UHF: C13 to C57, R21 to R60 CATV: S01 to S03, S1 to S41, Z1 to Z39 M VHF: A2 to A13 UHF: A14 to A79 CATV: A-8 to A-2, A to W+4, W+6 to W+84 8 (Antenna) 75-ohm external terminal Audio output (Speaker) 5W + 5W Number of terminal D Video Input: 2* Output: 1 Phono jacks; 1 VP-P, 75 ohms * One input line available 9 Audio Input: 2* Output: 1 Phono jacks; 500 mVrms * One input line available Output: 1 Stereo minijack 2 (Headphone) Picture tube 21 in. Tube size (cm) Screen size (cm) 54 Measured diagonally 51 Measured diagonally Dimension (w/h/d, mm) 639 × 458 × 490 Mass (kg) 26 Design and specifications are subject to change without notice. CAUTION SAFETY-RELATED COMPONENT WARNING!! SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR CARBON PAINTED ON THE CRT, AFTER REMOVING THE ANODE. COMPONENTS IDENTIFIED BY SHADING AND MARK ! ON THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. –2– KV-HA21M80 RM-969 TABLE OF CONTENTS Section Title Page Section SELF DIAGNOSIS FUNCTION ...................................... 4 1. GENERAL ................................................................. 7 2. DISASSEMBLY 2-1. Rear Cover Removal ............................................... 11 2-2. Speaker Removal .................................................... 11 2-3. Chassis Assy Removal ............................................ 11 2-4. Service Position ...................................................... 11 2-5. Terminal Bracket Removal ..................................... 11 2-6. Replacement Of Parts ............................................. 11 2-6-1. Replacement Of Light Guide ....................... 11 2-6-2. Replacement Of Power Button .................... 11 2-7. Picture Tube Removal ............................................. 12 Title Page 5. DIAGRAMS 5-1. Block Diagram ........................................................ 25 5-2. Circuit Boards Location .......................................... 27 5-3. Schematic Diagram ................................................. 28 (1) A Board Schematic Diagram ............................ 29 (3) CV Board Schematic Diagrams ........................ 31 5-4. Voltage Measurement ............................................. 32 5-5. Waveforms .............................................................. 35 5-6. Printed Wiring Boards and Parts Location ............. 36 5-7. Semiconductors ....................................................... 39 6. EXPLODED VIEWS 6-1. Picture Tube and Chassis ........................................ 41 7. ELECTRICAL PARTS LIST .................................... 42 3. SET-UP ADJUSTMENTS 3-1. Beam Landing ......................................................... 13 3-2. Convergence ............................................................ 14 3-3. Focus Adjustment .................................................... 16 3-4. G2 (SCREEN) and White Balance Adjustments ... 16 4. CIRCUIT ADJUSTMENTS 4-1. Adjustment With Commander ................................ 17 4-2. Adjustment Method ................................................ 17 4-3. Picture Quality Adjustment .................................... 23 4-4. Deflection Adjustment ............................................ 23 4-5. A Board Adjustment After IC003 (MEMORY) Replacement ............................................................ 23 4-6. Picture Distortion Adjustment ................................ 24 –3– KV-HA21M80 RM-969 SELF DIAGNOSIS FUNCTION The units in this manual contain a self-diagnosis function. If an error occurs, the STANDBY (1) indicator will automatically begin to flash. A description of the self-diagnosis function is explained in the instruction manual. The number of times the STANDBY (1) indicator flashes translates to a probable source of the problem. If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these problems occur. 1. DIAGNOSIS TEST INDICATORS When an errors occurs, the STANDBY (1) indicator will flash a set number of times to indicate the possible cause of the problem. If there is more than one error, the indicator will identify the first of the problem areas. Result for all of the following diagnosis items are displayed on screen. No error has occured if the screen displays a “0”. No. of times STANDBY (1) indicator flashes Self-diagnostic display/Diagnosis result • Power does not turn on Does not light — • +B overcurrent (OCP) • Horizontal deflection overdrive 2 times 002:000 or 002:001~255 • H.OUT Q801 is shorted. • Power does not come on. • Load on power line is (A board) shorted. • Has entered standby state after horizontal raster. • Power line is shorted or power supply is stopped. 004:000 or 004:001~225 • -13V is not supplied. (A board) • IC 551 faulty (A board) • Vertical deflection pulse is stopped 101:00 or 101:001~225 • Discharge CRT (C Board) • Static discharge • External noise • Power is shut down shortly, after this return back to normal. • Detect Micro latch up. Diagnosis Item Description • White balance failure (no PICTURE) • Vertical deflection stopped • Micro reset 4 times — Probable Cause Location • Power cord is not plugged in. • Fuse is burned out F600 (F) Detected Symptoms • Power does not come on. • No power is supplied to the TV. • AC power supply is faulty. Note 1: If a + B overcurrent is detected, stoppage of the vertical deflection is detected simultaneously. The symptom that is diagnosed first by the microcontroller is displayed on the screen. Note 2: Refer to screen (G2) Adjustment in section 3-4 of this manual. –4– KV-HA21M80 RM-969 2. DISPLAY OF STANDBY (1) INDICATOR FLASH COUNT 2 times 4 times Flash Count* +B overcurrent/overvoltage 2 times Vertical deflection stopped 4 times * One flash count is not used for self-diagnosis. Lamp ON 0.3 sec. Lamp OFF 0.3 sec. Diagnosis Item Lamp OFF 3 sec. STANDBY (1) indicator 3. STOPPING THE STANDBY (1) INDICATOR FLASH Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY (1) indicator from flashing. 4. SELF-DIAGNOSTIC SCREEN DISPLAY For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurances of failure for confirmation on the screen: [To Bring Up Screen Test] In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below: [Screen display] / channel [5] / Sound volume [-] / Power ON ˘ Note that this differs from entering the service mode (volume [+]). Self-Diagnostic screen display SELF DIAGNOSTIC 002 : 000 004 : 000 Numeral "0" means that no fault has been detected. 101 : 000 –5– KV-HA21M80 RM-969 5. HANDLING OF SELF-DIAGNOSTIC SCREEN DISPLAY Since the diagnosis results displayed on the screen are not automatically cleared, always check the self-diagnostic screen during repairs. When you have completed the repairs, clear the result display to “0”. Unless the result display is cleared to “0”, the self-diagnosis function will not be able to detect subsequent faults after completion of the repairs. [Clearing the result display] To clear the result display to “0”, press buttons on the remote commander sequentially as shown below when the selfdiagnostic screen is being displayed. Channel [8] / 0 [Quitting Self-diagnostic screen] To quit the entire self-diagnostic screen, turn off the power switch on the remote commander or the main unit. 6. SELF-DIAGNOSIS CIRCUIT IC301 Y/CHROMA JUNGLE IC001 SYSTEM [V] D553 FROM [+B] Q500 50 17 11 DAT1 53 IC003 MEMORY 5 DAT MP/ PROTECT SDA 8 54 11 DAT0 [+B overcurrent OCP ] Occurs when an overcurrent on the +B(135) line is detected by Q500. If Q500 go to ON and the voltage to pin 50 of IC301 more than 3.5V when V.SYNC is more than seven verticals in a period, the unit will automatically turn off. [Vertical deflection stopped] Occurs when an absence of the vertical deflection pulse is detected by Pin 17 and IC001 shut down the power supply. [White balance failure] If the RGB levels* do not balance or become low level within 5 seconds, this error will be detected by IC301. TV will stay on, but there will be no picture. * (Refers to the RGB levels of the AKB detection Ref pulse that detects IK.) –6– KV-HA21M80 RM-969 The operating instruction mentioned here are partial abstracts from the Operating Instruction Manual. The page numbers of the Operating Instruction Manual remain as in the manual. SECTION 1 GENERAL A Getting Started WARNING (continued) Step 1 Insert the batteries (supplied) into the remote. b Note • Do not use old batteries nor use different types of batteries together. Do not place any objects on the TV. Do not plug in too many appliances to the same power socket. Do not damage the power cord. Install the TV on a stable TV stand and floor which can support the TV set weight. Ensure that the TV stand surface is flat and its area is larger than the bottom area of the TV. Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned off, it is still connected to the AC power source (mains) as long as the power cord is plugged in. Unplug the TV before moving it or if you are not going to use it for several days. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tip • You can also connect your TV to other optional components. (See E) C Securing the TV B KV-HA21 only Step 3 To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. b Plug in the power cord, then press ! on the TV to turn it on. 20 mm 3.8 mm clamps screws SELECT PROGR band Screw the band to the TV stand and to the provided hole at the rear of your TV. Step 4 Press SELECT and PROGR + on the TV at the same time for one to two seconds to preset the channels automatically. (See J) Tip • To stop the automatic channel presetting, press SELECT. or SELECT Step 5 (1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV. Press SELECT on the remote until “LANGUAGE/ : ENGLISH” appears on the screen, then press + or – to change the on-screen display language. Note • Use only the supplied screws. Use of other screws may damage the TV. B WARNING D TV front and rear panels • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. • To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid that leaks from the batteries touches you, immediately wash it away with water. TV rear panel 0 R L(MONO) qa qs ! For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms. TV front panel For children’s safety, do not leave children alone with the TV. Do not allow children to climb onto it. (MONO) L R SELECT 9 To prevent fire or shock hazard, do not expose the TV to rain or moisture. Do not block the ventilation openings of the TV. Do not install the TV in a confined space, such as a bookcase or built-in cabinet. Do not operate the TV if any liquid or solid object falls into it. Have it checked immediately by qualified personnel only. Clean the TV with a dry and soft cloth. Do not use benzine, thinner, or any other chemicals to clean the TV. Do not scratch the picture tube. 8 7 6 ! PROGR 5 Button Function 1 ! Turn off or turn on the TV. 2 Remote control sensor. 3 1 Standby indicator. 3 Wake Up indicator. 4 PROGR +/– Select program number. 5 2 +/– * Adjust volume. 6 t Select TV or video input. 7 SELECT Select the desired item. 8 i Headphone terminal. 9, qa t Video input terminal. 0 8 Antenna input terminal. qs T Monitor output terminal. 4 3 2 1 * You can also use the 2 +/– buttons on the TV to work as the +/– buttons on the remote. Do not open the cabinet and the rear cover of the TV as high voltages and other hazards are present inside the TV. Refer servicing and disposal of the TV to qualified personnel. Your TV is recommended for home use only. Do not use the TV in any vehicle or where it may be subject to excessive dust, heat, moisture or vibrations. –7– KV-HA21M80 RM-969 G Specifications E Connecting optional components Connecting to the video input terminal ( t ) KV-HA21M80 Power requirements TV front panel Power consumption (W) Indicated on the rear of the TV (MONO) L R Television system B/G, I, D/K, M Color system Audio/Video cable (not supplied) PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43 Channel coverage Camcorder TV rear panel B/G VHF : E2 to E12 UHF : E21 to E69 CATV : S01 to S03, S1 to S41 I UHF : B21 to B68 CATV : S01 to S03, S1 to S41 D/K VHF : C1 to C12, R1 to R12 UHF : C13 to C57, R21 to R60 CATV : S01 to S03, S1 to S41, Z1 to Z39 M VHF : A2 to A13 UHF : A14 to A79 CATV : A-8 to A-2, A to W+4, W+ 6 to W+84 Video game equipment R Note KV-HA14M80 110-240 V AC, 50/60 Hz L(MONO) Antenna cable (not supplied) 8 (Antenna) 75-ohm external terminal Audio output (Speaker) Audio/Video cable (not supplied) Number of terminal (Video) 5W + 5W 3W + 3W Input: 2* Output: 1 Phono jacks; 1 Vp-p, 75 ohms * One input line available Input: 2* Output: 1 Phono jacks; 500 mVrms Output: 1 Stereo minijack VCR (Audio) Note • Do not connect video equipment to t (video input) at the front and the rear of your TV at the same time; otherwise the picture will not be displayed properly on the screen. i (Headphone) Picture tube Connecting to the monitor output terminal ( T ) 21 in. 14 in. Tube size (cm) 54 37 Measured diagonally Screen size (cm) 51 34 Measured diagonally Dimensions (w/h/d, mm) 639 × 458 × 490 466 × 346 × 419 26 13 Mass (kg) TV rear panel * One input line available Design and specifications are subject to change without notice. R L(MONO) Audio/Video cable (not supplied) Audio system VCR F Troubleshooting H Remote control If you find any problem while viewing your TV, please check the following guide. If any problem persists, contact your Sony dealer. 0 qa Symptom Snowy picture, noisy sound Good picture, Solutions qs qd • Check the antenna cable and connection on the TV, VCR and on the wall. • Preset the channel manually again. (See J) • Check the antenna setup. Contact a Sony dealer for advice. • Select the appropriate TV system. (See J) qf noisy sound No picture, no sound • Check the power cord, antenna and the VCR connections. • Press ?/1 (power) or ! (main power) to turn on the TV. Good picture, no sound • Press 2 + to increase the volume level. • Press % to cancel the muting. qg Dotted lines or stripes • Do not use a hair dryer or other equipment near the TV. • Check the antenna setup. Contact a Sony dealer for advice. qh Double images or • Use the fine tuning ("FINE") function. (See J) • Turn off or disconnect the booster if it is in use. • Check the antenna setup. Contact a Sony dealer for advice. “ghosts” No color Abnormal color patches The 1 (standby) indicator on your TV flashes red several 1 2 1 2 3 4 5 6 7 8 9 - 0 JUMP SOUND MODE 2 PROGR 3 4 5 Function Turn off temporarily or turn on the TV. 2 a 3 JUMP Display the TV program. – Jump to previous program number. – PROGR +/– Select program number. – 2 +/– Adjust volume. – SELECT Select the desired item. PIC MODE Select picture mode. +/– Adjust items. 4 5 6 7 9 0 Display on-screen information. qa % qj 6 qd qk 7 8 t qf 0 – 9, ÷ SPACE SOUND ql • Select the appropriate color system. (See J) • Adjust the color level. (See K) • Check the antenna setup. Contact a Sony dealer for advice. 9 • Keep external speakers or other electrical equipment away from the TV. Press ! (main power) to turn off the TV for about 15 minutes, then turn it on again to demagnetize the TV. TV • Count the number of times the 1 (standby) indicator flashes. Press ! (main power) to turn off your TV. Contact your nearest Sony service center. – – K – – Mute the sound. – Select TV or video input. – Input numbers. – Timer operations qj qk qg SOUND MODE ql SPACE SOUND qh A/B Set TV to turn on automatically. I Set TV to turn off automatically. I Select sound mode. Select space sound mode. K K Not function for your TV. – Teletext operations (green label) 8 x (red, green, yellow, blue) times after every three seconds. TV cabinet creaks. • Changes in room temperature sometimes make the TV cabinet expand or contract, making a noise. This does not indicate a malfunction. A "boom" sound is • The TV's demagnetizing function is working. This does not indicate a malfunction. heard when the TV is See Button 1 ?/1 0 qs qd qh qj qk turned on. –8– Not function for your TV. – KV-HA21M80 RM-969 Presetting channels (continued) I Setting the timers You can turn on and off your TV by using the and buttons respectively. Setting the Wake Up timer \/1 1 2 3 4 5 6 7 8 9 - 0 JUMP SOUND MODE 2 PROGR Press until the desired period of time appears 1 on the screen. If the picture or sound is abnormal when receiving programs through the 8 (antenna input) terminal (1) Press SELECT until “TV SYS” appears on the screen. (2) Press + or – to select the appropriate TV system until the picture or sound quality is optimal. WAKE UP TIMER:0H10M (After 10 minutes) B/G WAKE UP TIMER:OFF (No Wake Up timer) 2 I D/K M To change the color system setting WAKE UP TIMER:12H00M (After 12 hours) If the color is abnormal when receiving programs through the 8 (antenna input) terminal or the t (video input) terminal The Wake Up timer starts immediately after you have set it. SPACE SOUND TV To change the TV system setting Select the program number or video input you want to wake up to. \/1, or set the Sleep timer if you want 3 Press the TV to turn off automatically. The indicator on the TV lights up orange when the TV goes into standby mode. (1) Press SELECT until “COLOR SYS” appears on the screen. (2) Press + or – to select the appropriate color system until the color is optimal. AUTO PAL SECAM NTSC3.58 NTSC4.43 To skip program numbers (1) Press PROGR +/– or the number buttons until the unused or unwanted program number appears on the screen. (2) Press SELECT until “MANUAL PROGRAM” appears on the screen. (3) Press + or – once to enter the “MANUAL PROGRAM” mode. Setting the Sleep timer (4) Press PIC MODE to skip the unused or unwanted program number. Press until the desired period of time appears on the screen. SLEEP TIMER:30M (After 30 minutes) (5) Press SELECT to exit the “MANUAL PROGRAM” mode. Note • To restore the skipped program number again, preset the channel automatically or manually. SLEEP TIMER:60M (After 60 minutes) To use the fine tuning function The fine tuning (FINE) function may help to reduce the following problems: double images and lines moving across the TV screen. SLEEP TIMER:OFF (No Sleep timer) SLEEP TIMER:90M (After 90 minutes) You can use the fine tuning function as below: (1) Select the program number you want to adjust. The Sleep timer starts immediately after you have set it. Notes • You can also cancel the Wake Up and Sleep timers by turning off the TV’s main power. • If no buttons or controls are pressed for more than two hours after the TV is turned on using the Wake Up timer, the TV automatically goes into standby mode. J Presetting channels (2) Press SELECT until “MANUAL PROGRAM” appears on the screen. (3) Press + or – once to enter the “MANUAL PROGRAM” mode. (4) Press to display “FINE” on the screen. (5) Press + or – continuously until the above problems are minimized. The + or – icon on the screen flashes while tuning. (6) Press SELECT to exit the “MANUAL PROGRAM” mode. K Customizing the picture and sound You can customize the picture and sound by selecting the picture and sound modes or by adjusting its settings. You can automatically preset up to 100 TV channels in numerical sequence from program number 1, or manually preset desired channels and channels that cannot be preset automatically. You can change the sound effect by selecting the space sound mode. Selecting the picture mode Presetting channels automatically from a specified program number Number buttons 1 2 3 4 5 6 7 8 9 - 0 JUMP SOUND MODE 2 PROGR Press PIC MODE to select the desired picture mode. SELECT until “AUTO PROGRAM” appears 1 Press on the screen. + or – once to enter the “AUTO 2 Press PROGRAM” mode. SOUND MODE SELECT The on-screen display will start flashing. 3 + or – SPACE SOUND PIC MODE SELECT TV Press PROGR +/– or the number buttons until the desired program number appears on the screen. Press + or – to start presetting channels 4 automatically. 1 2 3 4 5 6 7 8 9 - 0 JUMP SOUND MODE 2 PROGR To view high contrast pictures. “STANDARD” view normal contrast pictures. “SOFT” view mild pictures. Selecting the sound mode + or – SPACE SOUND Select “DYNAMIC” Press SOUND MODE to select the desired sound mode. SPACE SOUND PIC MODE Select To “9 DYNAMIC” listen to dynamic and clear sound that emphasizes the low and high sound. “9 DRAMA” listen to sound that emphasizes vocals and background music. “9 SOFT” listen to soft sound. TV PROGR +/– Presetting channels manually SELECT until “MANUAL PROGRAM” 1 Press appears on the screen. Press + or – once to enter the “MANUAL 2 PROGRAM” mode. Press PROGR +/– or the number buttons until 3 the desired program number appears on the screen. Adjusting the picture and sound settings 1 Press + or – until the desired channel picture 4 appears on the screen. other channels manually, repeat steps 5 3Totopreset 4. 2 3 Press SELECT until the desired setting appears. Each time you press SELECT, the setting item will change as follows: PICTURE COLOR BRIGHT BALANCE TREBLE BASS HUE SHARP Press + or – to adjust the item. To adjust other items, repeat steps 1 to 2. Notes • “HUE” can be adjusted for the NTSC color system only. • Reducing “SHARP” can also reduce picture noise. –9– KV-HA21M80 RM-969 Customizing the picture and sound (continued) Selecting the space sound mode Press SPACE SOUND. Select To “ON” listen to monaural sound with a stereo-like effect. “OFF” turn off space sound mode. Note • You can also turn space sound on or off using the SELECT and + or – buttons. – 10 – SECTION 2 DISASSEMBLY 2-1. REAR COVER REMOVAL 2-2. SPEAKER REMOVAL 2-3. CHASSIS ASSY REMOVAL 2 Rear cover 2 Speaker Bracket 3 Speaker – 11 – 1 Two screws (+BVTP 4 × 16) 1 Eight screws (+BVTP 4 × 16) 2-4. SERVICE POSITION 1 Two screws washer head (+P 4 × 16) 2-6. REPLACEMENT OF PARTS 2-5. TERMINAL BRACKET REMOVAL For replacements of light guide,unscrew them, exchange with new parts and fix them with screws respectively. Terminal board bracket 2-6-1. Replacement of Light Guide One screw (+BVTP 4 × 16) One screw (+BVTP 3 × 12) A board standing position. Note: Undress necessary wires that creates tension while placing the chassis into Service Position. 1 Push the claw to direction of arrow and remove 2 Spring compression 3 Power Button RM-969 KV-HA21M80 Caution: Do not take out CRT support block while TV set in 2-6-2. Replacement of Power Button Note: NOTE : After removing the anode, short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the CRT. • Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom right and left. • REMOVING PROCEDURES a Holder DGC Demagnetic coil a !£ Chassis assy !º Two screws (washer head) (+P 4 × 16) 1 Turn up one side of the rubber cap in the direction indicated by the arrow a. b b 6 CV board – 12 – 5 Deflection yoke !¡ Speaker (15 × 6.5cm) 2 Two screws (Tapping 7+ Crown Washer) 4 Tension spring PWB Bracket 2 Using a thumb pull up the rubber cap firmly in the direction indicated by the arrow b. 1 Two screws (Tapping 7+ Crown Washer) c Screw Location 3 Anode cap Anode Button Beznet Hook Coating earth assy 9 Two screws (washer head) (+P 4 × 16) CRT Support Block !¤ Speaker (15 × 6.5cm) 7 Picture tube CRT Support Block 8 Cushion 3 When one side of the rubber cap is separated from the anode button, the anode-cap can be removed by turning up the rubber cap and pulling it up in the direction of the arrow c. • HOW TO HANDLE AN ANODE-CAP 1 Do not damage the surface of anode-caps with sharp shaped objects. 2 Do not press the rubber too hard so as not to damage the inside of anode-cap. A metal fitting called the shatter-hook terminal is built into the rubber. 3 Do not turn the foot of rubber over too hard. The shatter-hook terminal will stick out or damage the rubber. RM-969 • REMOVAL OF ANODE-CAP KV-HA21M80 2-7. PICTURE TUBE REMOVAL KV-HA21M80 RM-969 SECTION 3 SET-UP ADJUSTMENTS The following adjustments should be made when a complete realignment is required or a new picture tube is installed. Perform the adjustments in the following order : 1. Beam Landing These adjustments should be performed with rated power supply voltage unless otherwise noted. Controls and switches should be set as follows unless otherwise 2. Convergence 3. Focus 4. White Balance Note : Test Equipment Required. noted: PICTURE control ........................................................... normal 1. Pattern Generator 2. Degausser BRIGHTNESS control ................................................... normal 3. Oscilloscope ................................................................................................................................................................................................................................ Preparation : In order to reduce the influence of geomagnetism on the set's picture tube, face it east or west. Switch on the set's power and degauss with the degausser. Purity control 3-1. BEAM LANDING 1. Input a white signal with the pattern generator. Contrast normal Brightness 2. Set the pattern generator raster signal to a green raster. 3. Move the deflection yoke to the rear and adjust with the purity control so that the green is at the center and the blue and the red take up equally sized areas on each side. (See Figures 3-1 through 3-4.) 4. Move the deflection yoke forward and adjust so that the entire screen is green. (See Figure 3-1.) 5. Switch the raster signal to blue, then to red and verify the condition. 6. When the position of the deflection yoke has been decided, fasten the deflection yoke with the screws and DY spacers. 7. If the beam does not land correctly in all the corners, use a magnet to adjust it. (See Figure 3-4.) } Fig. 3-2 Blue Red Green Fig. 3-3 Purity control corrects this area. b a c d Disk magnets or rotatable disk magnets correct these areas (a-d). Deflection yoke positioning corrects these areas. b c a Fig. 3-1 d Fig. 3-4 – 13 – KV-HA21M80 RM-969 3-2. CONVERGENCE • Preparation : • Before starting this adjustment, adjust the focus, horizontal size and vertical size. • Receive dot/hatch signal. • Pic mode: Soft. (1) Operation of V. Stat magnet If the V. Stat magnet is moved in the "a" and "b" arrows, the red, green and blue dots move as shown below. 1 a b a b Horizontal and Vertical Static Convergence b B B G G R R Center dot R 2 G B R G a b B H. STAT VR V.STAT Magnet a R G b B B G R RV 702 3 a b C board 1. (Moving vertically), adjust the V.STAT magnet so that the red, green and blue dots are on top of each other at the center of the screen. 2. (Moving horizontally), adjust the H.STAT VR control so that the red, green and blue dots are on top of each other at the center of the screen. 3. If the H.STAT variable resistor cannot bring the red, green and blue dots together at the center of the screen, adjust the horizontal convergence with the H.STAT variable resistor and the V.STAT magnet in the manner given below. (In this case, the H.STAT variable resistor and the V.STAT magnet influence each other, so be sure to perform adjustments while tracking.) Purity b a B R G b G R B 4 BMC (Hexapole) Magnet. If the red, green and blue dots are not balanced or aligned, then use the BMC magnet to adjust in the manner described below. R G B R B R G B R G B R G B BMC BMC (Hexapole) Purity G G R V.STAT V.STAT – 14 – B KV-HA21M80 RM-969 (2) Dynamic Convergence Adjustment Preparation: Before starting this adjustment, adjust the horizontal static convergence and the vertical static convergence RB B R YCH TLH Insert TLV TLH Correction Plate to DY Pocket (Left or Right) YCH Rotate YCH VOL on DY TLV Rotate XCV Rotate TLV XCV VOL ON DY Adj core on DY ON DY: YCH TLV (3) Screen-corner Convergence Fix a Permalloy assy corresponding to the misconverged areas b a b a a-d : screen-corner misconvergence c d c d – 15 – a to d : Permalloy assembly KV-HA21M80 RM-969 3-3. FOCUS ADJUSTMENT FOCUS adjustment should be completed before W/B adjustment. 1. Receive digital monoscope pattern. 2. Set "Picture Mode" to "DYNAMIC". 3. Adjust focus VR so that the center of screen becomes just focus. 4. Change the receiving signal to white pattern and blue back. 5. Confirm magenta ring is not noticeable. Incase magenta is very obvious, adjust focus VR to take balance of magenta ring and focus. 2.a) WHITE BALANCE ADJUSTMENT 1) Set to Service Mode (Refer Section 4-1: ADJUSTMENTS WITH COMMANDER). 2) Input white raster signal. 3) Set 49 (ABL) and IF (VP2) service mode to 00. 4) Set Picture to DYNAMIC. 5) Select OB (RDR) with [1] and [4], and set the level to 25 with [3] and [6] for best white balance. 6) Select OC 'GDR' and OD 'BDR' with [1] and [4], and adjust the level with [3] and [6] for the best white balance. 7) Write into the memory by pressing [MUTING] then [0]. 8) Set back 49 'ABL' and IF 'VP2' service mode to original data. 2.b) SUB BRIGHT ADJUSTMENT 1) Set to service mode. 2) Set 49(ABL) and IF (VP2) service mode to 00 3) Input a staircase signal of black to white from the pattern generator. 4) BRIGHTNESS .... 50%. PICTURE ............ MINIMUM 5) Select OE 'SBR' with [1] and [4], and adjust OE 'SBR' level with [3] and [6] so that the second stripe from the right is dimly lit. 6) Write into the memory by pressing [MUTING] then [0]. 7) Set back 49 (ABL) and IF (VP2) service mode to original data. FOCUS SCREEN White second from the right FLYBACK TRANSFORMER (T503) 3-4. G2 (SCREEN) AND WHITE BALANCE ADJUSTMENTS 1. Black G2 (SCREEN) ADJUSTMENT 1) Set the PICTURE to normal. 2) Put to VIDEO input mode without signals. 3) Connect R, G and B of the C board cathode to the oscilloscope. 4) Adjust BRIGHTNESS to obtain the cathode voltage to the value below. 5) Adjust G2 (screen) on the FBT until picture shows the point before cut off. Cathode setting voltage: 175 V ± 2 (VDC) 0V – 16 – KV-HA21M80 RM-969 SECTION 4 CIRCUIT ADJUSTMENTS 4-1. ADJUSTMENT WITH COMMANDER Service adjustments to this model can be performed using the supplied Remote Commander RM-969. e. OTHER FUNCTION VIA REMOTE COMMANDER 7, All the data becomes the values in memory. a. ENTERING SERVICE MODE With the unit on standby n [DISPLAY] n 5 n VOL (+) n [POWER] 8, 5, - All user control goes to the standard state. Service data initialization (Be sure not to use 2, - usually.) Copy and write all data. [MUTE], - This operation sequence puts the unit into service mode. Write 50Hz adjustment data to 60Hz or vice versa. 4-2. ADJUSTMENT METHOD The screen display is : Item Adjustment Item No Data Mode 00 HPS 33 SERVICE 080S 1.6C 00 Depends on signal 50 000A PAL,SECAM:50 NTSC :60 Total Power-On time (hours) Software version Suffix No (OEM Code) Item Number 00 HPS This explanation uses H Shift as an example. 1. Select “00 HPS” with the 1 and 4 buttons. 2. Raise/lower the data with the 3 and 6 buttons. 3. Select the optimum state. (The standard is 1F for PAL reception.) 4. Write with the [MUTING] button. (The display changes to WRITE.) 5. Execute the writing with the - button. (The WRITE display will be changed to red color while excuting, and back to SERVICE.) Example on screen display :- b. METHOD OF CANCELLATION FROM SERVICE MODE Set the standby condition (Press [POWER] button on the commander), then press [POWER] button again, hereupon it becomes TV mode. 00 HPS 33 SERVICE 50 GREEN Adjusted with [3] and [6] buttons. c. METHOD OF WRITE INTO MEMORY 1) Set to Service Mode. 00 2) Press [1] (UP) and [4] (DOWN), to select the adjustment. 4) Press [MUTING] button to indicate WRITE on the screen. HPS 33 WRITE 50 GREEN 50 RED The WRITE display then the display returns to green SERVICE Write with [MUTING] 5) Press - button to write into memory. 00 HPS 33 WRITE d. MEMORY WRITE CONFIRMATION METHOD 1) After adjustment, pull out the plug from AC outlet, and then plug into AC outlet again. 2) Turn the power switch ON and set to Service Mode. 3) Call the adjusted items again to confirm adjustments were made. 1, 4 ↓ 3, 6 ↓ Select the adjustment item. [MUTING] Writes. ↓ - Raise/lower the data value. Executes the writing. Write executed with [0] Use the same method for all Items. Use 1 and 4 to select the adjustment item, use 3 and 6 to adjust, write with [MUTING], then execute the write with -. Note : 1. In [WRITE], the data for all items are written into memory together. 2. For adjustment items that have different standard data between 50Hz or 60Hz, be sure to use the respective input signal after adjustment. – 17 – No. Name Init. Range Function Table & Note Device Name (Slave Address) Common 50 60 2A 2A 00 HPS 2A 3F H Position 50/60Hz 01 HSZ 1F 3F H Size 50/60Hz 1F 1F 02 PAP 1F 3F Pin Amplitude 50/60Hz 1F 1F 03 CPN 1F 3F Corner Pin 50/60Hz 1F 1F 04 TLT 1F 3F Tilt 50/60Hz 1F 1F TDA8843/44(8A) 05 VSL 26 3F V Slope 50/60Hz 20 20 06 VAP 0F 3F V Amplitude 50/60Hz 0F 0F 07 SCO 0F 3F S Correction 50/60Hz 0F 0F 08 VPS 1F 3F V Shift 50/60Hz 1F 1F 1F 1F SECAM NTSC PAL TV Video Teletext M System Non-M System Dynamic Others – 18 – 09 VZM 19 3F Vertical Zoom 0A VSC 1F 3F Vertical Scroll 0B RDR 1F 3F R Drive Dynamic/Others 1F 24 0C GDR 25 3F G Drive Dynamic/Others 25 25 0D BDR 25 3F B Drive Dynamic/Others 25 20 0E SBR 58 7F Sub Brightness 0F PMX 20 3F Picture Maximum Data 10 PMI 04 3F Picture Minimum Data 11 SHU 07 0F Sub Hue TV/Video 07 09 12 SSH 01 03 Sub Sharpness TV/Video 01 03 19 50/60Hz 58 TV/Video/Teletext 20 20 20 04 13 SC1 20 3F Sub Color Lower 50/60Hz 20 1C 14 SC2 08 3F Sub Color Higher 50/60Hz 08 0B 15 FO 00 03 01 Time Constant TV/Video/Teletext 00 00 00 16 AGT 00 3F AGC Take Over TV/Video/Teletext 00 00 00 17 VSW 00 01 Video Mute Switch TV/Video/Teletext 00 01 00 18 FOR 03 03 Forced Field Frequency 03 19 DL 00 01 De-interlace 00 1A POC 00 01 Fixed 01 Synchro. Mode 00 1B COR 01 01 Noise Coring TV/Video/Teletext 01 00 00 1C RBL 00 01 RGB Blanking TV/Video/Teletext 00 00 00 1D YDL 0A 0F Y-Delay 1E VP1 00 FF Extra Bits (see specified pages) PAL/NTSC/SECAM 0A 20 1F VP2 01 FF Extra Bits (see specified pages) 01 20 VP3 0F FF Extra Bits (see specified pages) 0F 21 WST 15 FF W/G Stereo Threshold 22 WBT EC FF W/G Bilingual Threshold MSP3417G(80) 15 EC 23 WLL 05 FF W/G Monaural Threshold 05 24 WAC 01 0F W/G Agreement Count 01 25 WDL 30 FF W/G Search Delay 30 0C 06 RM-969 Functionality KV-HA21M80 Adjustment Item Table Adjustment Item Table Functionality Init. Range Function Table & Note Device Name (Slave Address) No. Name 26 NDL 20 FF NICAM Search Delay 20 27 SDL 10 FF Stereo Status Read Delay 10 28 AGC 01 01 AGC Switch auto/constant 01 29 REL 28 3F AGC Gain at Constant Mode 28 00 Common 2A CRM 00 01 Carrier Muting on/off 2B ACO 01 01 Audio Clock-out on/off 01 2C FP 1B 7F FM Prescale for B/G, I, D/K 1B 2D FPM 32 7F FM Prescale for M 32 2E FH 36 7F FM Prescale for HDEV (non-M) 36 2F FHM 65 7F FM Prescale for HDEV (M) 65 30 WGP 1C 7F W/G Prescale 1C 7F 31 NIP 7F 7F NICAM Prescale 32 ERR 50 FF Auto FM Switch Threshold 50 33 VOL 6D 7F DFP Volume Maximum 73 34 ING 00 0F Input Gain 35 VOM 00 3F Volume Output Gain M System/non-M/Video TDA7438(88) M System only BCS 01 03 Bass Center Shift 01 TCS 02 03 Treble Center Shift 02 – 19 – 38 TXH 2A FF Horizontal Display Position 39 TXV 27 3F Vertical Display Position (line offset from V-sync) 3A THD 00 7F H-sync Active Edge Shift 00 3B TVD 3F 7F V-sync Active Edge Shift 3F 3C HPL 01 01 H-sync Polarity Configuration 00 : Positive, 01 : Negative 01 3D VPL 01 01 V-sync Polarity Configuration 00 : Positive, 01 : Negative 01 FPL 01 01 Field Polarity Configuration FMD 00 00 Force Mode SECAM NTSC PAL TV Video 00 36 3F 60 Teletext M System Non-M System 03 00 Dynamic Others 00 37 3E 50 SAA5264(58) 2A 27 00 : V-sync second half line, 01 : V-sync first half line 01 00 : Auto, 01 : Default, 02 : Fastext, 03 : Top Mode 00 40 TBR 08 0F Set Teletext RGB Brightness 41 NOP 01 0F National Option Table Configuration 01 42 TCH 01 03 Twisted Character Set Configuration 01 08 43 BKP 00 3F Picture Data at Blanking OFF 44 ODL 10 FF Power ON Delay 12 45 OSH 0A 3F OSD H Position 0A Other Control 00 46 TSY 00 03 TV System at Auto Preset 47 DKS 01 01 D/K Stereo enable/disable 01 48 MUT 00 01 Muting on/off at No Sync 00 00 : B/G, 01 : I, 02 : D/K, 03 : M 00 49 ABL 01 01 Bright ABL Switch 01 4A SCM 01 01 SECAM Trap active/inactive 01 4B SLS 01 01 Activate SL.OR.IFI Sync 01 4C SSV 02 07 Space Sound Volume Step Up 02 4D VPW 35 7F Timer of Video Processor start up wait 35 4E OP1 2F FF Optional Flags 0 (see specified pages) 2F 4F OP2 0F FF Optional Flags 1 (see specified pages) 8F 50 OP3 00 FF Optional Flags 2 (see specified pages) 10 RM-969 In case of a device replacement, adjustment by rewriting the data value is necessary for some items. KV-HA21M80 NOTE: • Bold item :- are fixed data • Standard data listed on the Adjustment Item Table are reference values, therefore it may be different for each model and for each mode. • Note for Different Data Those are the standard data values written on the microprocessor. Therefore, the data values of the modes and stored respectively in the memory. KV-HA21M80 RM-969 ITEM INFORMATION No. 1E VP1 Item - - BCO OSO SBL HBL FCO FFI KV-HA21M80 0 0 0 0 0 0 0 0 BCO OSO SBL HBL FCO FFI Switch-on behaviour 1=Switch -on of picture via internal delay 0=Without delay 1=Switch off in vertical overscan 0=Switch-off undefind Service blanking 1= on 0= off RGB Blanking Mode 1 = wide blanking, 0 = normal blanking Forced Color-on 1=no colour killer 0=normal colour killer function Fast filler IF-PLL 1=increased time constant 0=normal time constant 00(4) 18(7) 0B(7) 02(7) 1B(0) 1A(1) No. 1F VP2 Item - - MAT DS DSA EBS BLS BKS KV-HA21M80 0 0 0 0 0 0 0 1 MAT DS DSA EBS BLS BKS PAL-SECAM-/NTSC Matrix 1 =PAL matrix, 0=adapted to standard Dynamic skin control on/off 1= on 0= off Dynamic skin control angle 1=correction angle 117 degrees 0=correction angle 123 degrees Extended Blue Stretch 1= on 0= off Blue stretch 1= on 0= off Black stretch 1= on 0= off 0E(7) 1A(3) 1A(2) 1A(0) 18(4) 18(3) No. 20 VP3 Item KV-HA21M80 BB AKB BPS CB ACL BB AKB BPS CB ACL CL2 CL1 CL0 0 0 0 0 1 0 0 0 Blue back when no video signal is identified 1= on 0= off Black current stabilisation 1=not active 0=active Bypass of chroma base-band delay line 1=bypassed 0=active Chroma bandpass centre frequency 1= 1.1x Fsc 0=Fsc Automatic colour limiting 1= active 0= not active CL2 0 0 0 0 1 1 1 1 CL1 0 0 1 1 0 0 1 1 CL0 0 1 0 1 0 1 0 1 18(0) 02(6) 19(6) 18(5) 19(5) Cathode Drive amplitude 57V 63V 70V 77V 84V 91V 99V 107V No. 4E OP1 HA ME VOL Item KV-HA21M80 0 AV Input 0 1 COMB B/G I D/K M HEX 0 1 1 1 1 2F HA ME Vol Tone controller Volume curve setting. AV Input 00 = no AV Input model 10 = 2 AV Input model COMB (for NTSC model) 1 = Enable external comb filter, 0 =Disable external comb filter 01 = 1 AV Input model 11 = Not available Other optional function will be enabled if the corresponding bit is set to 1. – 20 – 1 = for HA(ME), 0 = for HA(GE) KV-HA21M80 RM-969 No. 4F OP2 Item No NICAM US ST HDEV IV-Curve 1 0 0 0 KV-HA21M80 XTAL 1 SECAM 2nd Lang. HEX 1 1 8F 1 No NICAM US ST 1 = NICAM search is disable in any TV system, 0 = NICAM search operates (Reserved for NTSC model) 1 V-Curve (for monaural mode) 1 = using common volume curve for every mode and every TV system 0 = another volume curve available for video mode and M system XTAL SEL 00 = only 4.43 XTAL 10 = not used 01 = only 3.58 XTAL 11 = both 4.43 and 3.58 XTAL Other optional function will be enabled if the corresponding bit is set to 1. No. 50 OP3 Pict Rot. Item KV-HA21M80 0 Auto TV Sys. No Bal. SPACE SOUND KOREAN ST 0 0 1 0 VM H.K. BIL Thai Bil. HEX 0 0 0 10 No Bal. (for AV stereo model) 1 = no balance in analog select items, 0 = balance included SPC SOUND 1 = Space Sound available, 0 = not available Korean ST (Reserved for NTSC model) H.K. Bil. (for monaural model) 1 = NICAM bilingual available (No NICAM stereo), 0 = not available Other optional function will be enable if the corresponding bit is set to 1. – 21 – KV-HA21M80 RM-969 OPERATION GUIDE SERVICE MODE How to set up new NVM (or initialize already written one) (1) AC ON (2) Enter Service Mode - describing below how to enter (3) Push the commander button “5” and “0” sequentially (only set initial data into RAM, but not write them into NVM yet) (4) Push the commander button “2” and “0” sequentially (copy the data into all NVM area - all wide modes and 50/60Hz respectively) (5) Push the commander button “8” and “0” sequentially (initialize user data, select program 1 and exit Service Mode) (6) Select TV system and execute Auto Preset How to enter Service Mode • At power ON, push the commander button “test” and “TV ON” sequentially • At stand-by, push the commander button “display”, “5”, “vol +” and “power” sequentially How to exit Service Mode • Push the commander button “other ON” or power (AC) OFF How to increment/decrement items and data • Items : push the commander button “1” / “4” • Data : push the commander button “3” / “6” (not write into NVM) Other operations • Write data into NVM - push the commander button “mute” and “0” sequentially • Read data from NVM - push the commander button “7” and “0” sequentially • Copy 50Hz data into 60Hz area - push the commander button “display” and “0” sequentially SELF DIAGNOSIS MODE How to enter Self Diagnosis Mode • At stand-by, push the commander button “display”, “5”, “vol-” and “power” sequentially How to exit Self Diagnosis Mode • Push the commander button “other ON” or power (AC) OFF Other operations • Clear data and Write into NVM - push the commander button “8” and “0” sequentially HOTEL TV MODE How to enter Hotel TV Mode ON stage • At stand-by, push the commander button “display”, “MUTE”, “vol +” and “power” sequentially • The Hotel TV setup display, where the maximum level of the volume can be applied (=35 or above) • Write data into NVM - push the commander button “mute” and “0” sequentially How to enter Hotel TV Mode OFF stage • At stand-by, push the commander button “display”, “MUTE”, “vol -” and “power” sequentially • Write data into NVM - push the commander button “mute” and “0” sequentially Modification Note The item including the new addition is yellow. 1. The flag was added to bit 7 of OP1. This is the flag which chooses the volume curve used by HA (ME) model. (V2. IC) – 22 – KV-HA21M80 RM-969 4-3. PICTURE QUALITY ADJUSTMENT 4-4. DEFLECTION ADJUSTMENT SUB COLOR ADJUSTMENT 1. Select Video. 2. Input a PAL color-bar. 3. Set to the following condition: PICTURE 100%, BRIGHTNESS 50%, COLOR 50% 4. Connect an oscilloscope to pin 1 (B OUT) of CN300, A board. 5. Set to Service Mode and select 13 ‘SC1’ with 1 and 4 of the commander then adjust to VB2=VB3=VB4 with 3 and 6. 6. Press [MUTING] → - of the commander to write the data. 7. Adjust 13 ‘SC1’ as step 2 to 5 when receiving NTSC color-bar. NORMAL MODE (50Hz) 1. Set to Service mode. 2. Input PAL color bar. 3. Using the 1 and 4 button, select category GEO (Service Mode). 4. Raise/lower the data using the 3 and 6 buttons. Select and adjust the following items to obtain optimum image. Service Item GEO : 00 01 02 03 04 05 06 07 08 VB1 VB2 VB3 VB4 VB2 = VB3 = VB4 VB2 = VB3 = VB4 (Difference is within 70mV) SUB HUE ADJUSTMENT 1. Select Video. 2. Input a NTSC 3.58, color-bar into Video/TV mode. 3. Set the following condition: PICTURE 100%, BRIGHTNESS 50%, COLOR 50% 4. Connect an oscilloscope to pin 1 (B OUT) of CN300, A board. 5. Select 11"SHU" with 1 and 4 of the commander by setting to Service Mode and adjust to VB1=VB2=VB3=VB4 with 3 and 6 . H POSITION H SIZE PIN AMPLITUDE CORNER PIN TILT V SLOPE VERTICAL AMPLITUDE S CORRECTION V SHIFT NORMAL MODE (60Hz) 5. Input 525/60Hz signal. 6. Using the 1 and 4 buttons select category GEO (Service Mode). 7. Select and adjust the following items to obtain obtimum image. Raise/lower the data with the 3 and 6 buttons. Service Item GEO : 00 01 02 03 04 05 06 07 08 VB1 VB3 HPS HSZ PAP CPN TLT VSL VAP SCO VPS VB4 VB2 HPS HSZ PAP CPN TLT VSL VAP SCO VPS H POSITION H SIZE PIN AMPLITUDE CORNER PIN TILT V SLOPE VERTICAL AMPLITUDE S CORRECTION V SHIFT 4-5. A BOARD ADJUSTMENT AFTER IC003 (MEMORY) REPLACEMENT VB1 = VB2 = VB3 = VB4 6. 7. 8. 9. The highest level of VB1,VB2,VB3,VB4 must be aligned at the same line. Ideal difference level between VB2 and VB3 should be within ± 110mV. Press [MUTING] → - of the commander to write the data. Select TV channel with NTSC 3.58 and repeat 3 to 5. Press [MUTING] → - of the commander to write the data. Single system model with NTSC 4.43, select TV channel with NTSC 4.43 and repeat 3 to 5. 1. 2. 3. 4. 5. – 23 – Enter to Service Mode. Press commander buttons 5 and - (Data Initialize), and 2 and - (Data Copy) to initialize the data. Call each item number and check if the respective screen shows the normal picture. In cases where items are not well adjusted, rectify the fine adjustment. Write the data per each item number ([MUTING] +-). Select item numbers 4E ‘OP1’, 4F ‘OP1’, 50 ‘OP2’ and respectively set the bit per model with command buttons 3 and 6 . Press commander buttons 8 and - (Test Normal) to return to the data that was set on the shipment from the factory. (This will also cancel Service Mode.) KV-HA21M80 RM-969 4-6. PICTURE DISTORTION ADJUSTMENT Item Number 00 – 08 00 HPS (H POSITION) 01 HSZ (H SIZE) 02 PAP (PIN AMPLITUDE) 03 CPN (CORNER PIN) 04 TLT (TILT) 05 VSL (V SLOPE) 06 VAP (VERTICAL AMPLITUDE) 07 SCO (S CORRECTION) 08 VPS (V SHIFT) – 24 – KV-HA21M80 KV-HA21M80 RM-969 RM-969 SECTION 5 DIAGRAMS 5-1. BLOCK DIAGRAM A POWER SUPPLY, DEFLECTION, AUDIO AND VIDEO PROCESSING, AUDIO/VIDEO INPUT/OUTPUT, SYSTEM CONTROLLER Q405 Q404 BUFFER L (MONO) BUFFER L (MONO) VIDEO 7 L IN Q709 5 L IN J701 L MUTE Q711 Q705 G DRIVE G AMP 10 9 8 J200 HEADPHONE L OUT 7 Q708 200V H2 H1 MUTE 8 IC203 AUDIO OUT 2 TVR 3 TVL CN701 IK LIMIT 9 R IN R V901 PICTURE TUBE 3 6 IC201 TONE CONT L (MONO) RV702 G2 IK LIMIT 8 L OUT 27 Q706 R AMP Q401 R MUTE 6 Q712 R DRIVE R Q402 R VIDEO IN 1 (REAR) MONITOR OUT Q403 VIDEO VIDEO IN 1 (FRONT) CV (RGB AMPLIFIER) J400 VIDEO BUFFER R OUT 26 2 R IN R OUT 12 Q710 Q704 B DRIVE B AMP 1 5 CN200 4 L1 MON OUT L 6 1 R1 MON OUT R 8 TVR SDA SCL 22 21 2 AUDIO IN L AUDIO IN R CN301 6 2 Q707 SP L SPACE SOUND IK LIMIT SP R L IF MONITOR OUT L +9V MONITOR OUT R R G B IK Q101 BUFFER CN703 CN300 3 2 1 5 3 2 1 5 R G B IK Q103, 104 FILTER TU100 IC604 Q102 IF BUFFER IF AGC TU U/V Q306, 308 SWF100 IC001 SYSTEM CONTROLLER 59 L/H 60 U/V Q105 VC AMP Q106 VC FILTER 38 VC CH S003 TV/VIDEO S004 CN302 1 6 3 4 VOL S005 +9V OUT 5 1 IN RESET 4 IC004 IR DET SEL S002 35 EXTAL X101 +5V D001 TIMER CN001 6 7 R G B BLK SDA SCL SIRCS 26 B/G SW 2 3 TIMER Q002 6 RESP/ NICAM D/K I M B/G 2 3 4 1 NICAM ST/BY 54 IIDAT0 BRT ABL 56 IICLK0 VPULSE VSYNC HDSW 12 BLK 42 17 48 27 3 6 4 14 5 13 8 11 7 2 IC601 REG SW 9 OVP 1 DRIVE LATCH T503 FBT BUFFER 40 45 46 47 +15V 8 6 PH600 PHOTO COUPLER 2 5 4 6 11 3 4 2 1 IC602 ERROR AMP 1 1 2 CN500 7 200V 1000V H1 9 10 Q004 Q800 T801 Q801 H OUT FV IC850, IC851 PIN CONT R-Y 32 13 3 1 Q802 L802 S801 H SENT PIN OUT DY1 H+ H+ 1 2 D1505 3 4 5 IC551 V OUT Q561 X RAY D561 +135V V+ 5 6 7 HP VIDEO 4 – 25 – VDY V+ V– DY ASS'Y 1 HV H+ H– HDY H– H– V– ABL 22 EHTX-RAY 50 5 DUMPER H DRIVE B-Y 31 1 D804, D851 H PROT D591 CN002 VP 15 AC IN F601 R IN G IN B IN IN SW 7 SCL 8 SDA 2 3 7 –13V 23 24 25 26 2 16 OSC +135V 35 4.43/3.58 HOR OUT EAST/WEST VERT POS VERT NEG 17 2 13 1 30 29 CVBS OUT 38 1 SYNC FILTER SYNC FILTER X443 4.43MHz Q001 +B Q319 X358 3.58MHz CN601 T600 Q305 CT355,CF355 34 3.58 34 XTAL LED DRIVE 1 +11V SYNC FILTER Q309, 312 Q301, 303 CVBS IN INT SIF IN R-Y OUT B-Y OUT +5V Q303 CT345,CF345 M SW 41 SSCP/FBT 36 RESET LED DRIVE 1 2 3 4 6 CLK 5 DAT CVBS IN R OUT 21 DEEMP G OUT 20 B OUT 19 IF IN IK 18 IF IN SIF 1 AGC IF OUT 6 +5V R M-SW SDA SCL IICLK1 55 IIDAT1 53 HSYNC 47 HSYNC 25 IC002 +5V REG VOL + S001 17 55 48 49 54 +18V SYNC FILTER Q311, 313 G BUFFER IC003 MEMORY 41 KEY1 40 KEY2 Q300 CT360,CF360 I SW IC301 Y/C JUNGLE Q315 R 51 G 50 B 49 D601 T601 SYNC FILTER Q307, 310 MUTE 11 Q100 BUFFER CH + S006 Q304 CT365,CF365 DK SW L/H S600 +9V REG +9V – 26 – KV-HA21M80 RM-969 5-2. CIRCUIT BOARDS LOCATION CV BOARD A BOARD – 27 – KV-HA21M80 RM-969 5-3. SCHEMATIC DIAGRAM Note: • All capacitors are in µF unless otherwise noted. • All electrolytic capacitors are rated at 50V unless otherwise noted. • All resistors are in ohms. kΩ = 1000Ω, MΩ = 1000kΩ • Indication of resistance which does not have rating electrical power is as follows. Pitch: 5 mm Rating electrical power 1/4W (CHIP: 1/10W) • • • • • • • • • • • • • • : nonflammable resistor. : internal component. : panel designation or adjustment for rrepair. All variable and adjustable resistors have characteristic curve B unless otherwise noted. Readings are taken with a color-bar signal input. no mark : Common ( ) : PAL [ ] : NTSC 3.58 Readings are taken with a 10 MΩ digital multimeter. Voltage are dc with respect to ground unless otherwise noted. Voltage variations may be noted due to normal production tolerances. All voltage are in Volt. ✽ : Cannot be measured. Circled numbers are waveform references. : B +bus. : B –bus. ÷ : signal path. ¢ Reference information RESISTOR : RN : RC : FPRD : FUSE : RS : RB : RW :✽ COIL : LF-8L CAPACITOR : TA : PS : PP : PT : MPS : MPP : ALB : ALT : ALR Note: METAL FILM SOLID NONFLAMMABLE CARBON NONFLAMMABLE FUSIBLE NONFLAMMABLE METAL OXIDE NONFLAMMABLE CEMENT NONFLAMMABLE WIREWOUND ADJUSTMENT RESISTOR MICRO INDUCTOR TANTALUM STYROL POLYPROPYLENE MYLAR METALIZED POLYESTER METALIZED POLYPROPYLENE BIPOLAR HIGH TEMPERATURE HIGH RIPPLE The component identified by shading and mark ! are critical for safety. Replace only with part number specified. – 28 – KV-HA21M80 KV-HA21M80 RM-969 RM-969 (1) A Board Schematic Diagram B OUT G OUT R OUT GND I K 9V VM OUT GND Q404 MSB709-RT1 VI DEO I N 9V C874 0.01 F:CHIP R868 10 :FPRD C231 2.2 16V F C232 2.2 16V F 6 1 5 C422 # 4 2 3 1 SW TVR 6 2 OUT GND 5 R VCC C423 # C424 # 4 JR206 # JR203 # C224 1 C225 1 R219 100 R220 100 R525 # 5 D521 # D520 # 6 7 8 C521 # CN520 # FOR ROTATION IC520 # R523 # R520 # 4 R524 3 2 1 R528 # # 3 NS+ 2 NC 1 NS- 1 200V 2 NC 3 GND 4 NC 5 H1 R527 # R526 # C520 # R563 1.5k :CHIP F. B- PL S VSS( - 1 3 V ) OUT PUT VCC( OUT) REF - VOL T 3 5 7 4 D552 GP08D V.DRIVE C561 0.0047 B:CHIP R565 1.2 1W :RS 4 3 2 1 H+ 12 5 R564 220 1W :RS C562 0.1 100V :PT T503 NX-4751//M3A4 6 C552 0.47 :MPS DRV- I N VCC( + 1 3 V ) IC301 TDA8844/N2 D851 EGP20G 6 5 7 8 1 2 3 4 2 C559 0.1 100V R558 :PT 22K :CHIP JW146 2.2K 1/2W R893 # C860 150K :CHIP L 11V DY1 6P – 30 – 1 C501 220 25V TO C BOARD CN701 2 3 C556 0.1 25V 200V 6 R557 1.5K :CHIP C503 0.001 500V B R507 0.47 D502 ELIZ 1/2W -13V-RECT :FPRD C504 0.001 500V B C511 # 5 14 FV SV 13 R811 100 3W :RS L500 10 2.2mH :EL0606 C510 0.01 100V R515 # 9 7 D504 ELIZ 200V-RECT D802 C810 0.022 GP08D 200V H.CENT-1 :PT C812 0.33 250V L803 R810 4.7mmH 100 2W:RS R514 2.2k 11 8 C505 33 160V D803 GP08D H.CENT-2 CN500 5P WHT :S-MICRO 4 R508 0.47 1/2W :FPRD L800 10mH C811 1 250V HV C506 C502 # 220 25V D503 ELIZ 15V-RECT R516 # R559 47k D553 RD5.6ESB2 :CHIP H OUT 0 100k :CHIP :RN-CP C867 2200p B:CHIP R883 5.6k :CHIP 14 VCC R448 # D409 # R222 2.2K 1 R374 2.2k :CHIP C360 0.1 :MPS R367 120k :CHIP C341 # D329 # R348 D330 # 100 :CHIP C340 # C558 0.001 B:CHIP R870 220K :CHIP R865 10k :CHIP FB800 1.1UH C430 # OUT GND 3 R449 # JR205 0 :CHIP 6 5 4 C218 0.1 16V C220 0.022 B:CHIP C222 0.018 B:CHIP IC201 TDA7438D013TR C219 0.018 B:CHIP C221 4700P :CHIP C OUT D312 UDZSTE-179.1B R862 C857 2.2k :CHIP 10 C554 0.047 F:CHIP R560 # D854 UDZ-STE-1713B C875 0.1 F:CHIP 25V R864 Q850 3.3k MSD601-RT1 :RN-CP C868 Q851 0.022 F:CHIP MSB709-RT1 Q801 2SD2624-CA C421 # L501 JW(5mm) D315 1SS355TE-17 1 3 GND R351 # Y OUT C330 0.1 F:CHIP 25V C356 0. 01 B:CHIP R360 . 4.7K R362 27k :CHIP R361 220 :CHIP C352 0.0022B:CHIP C348 0.1 F:CHIP 25V R364 15k :CHIP R335 100 :CHIP R336 100:CHIP R337 10k :CHIP D328 # C327 0.1 F:CHIP 25V D309 UDZSTE-179.1B C323 100p CH:CHIP R334 100 :CHIP C344 15P CH:CHIP R357 150k : CHIP C347100 16V C366 10016V D331 UDZSTE-179.1B D332 UDZSTE-179.1B R332 0 :CHIP X301 4. 43MHz C332 100 16V R556 # C865 100 16V AUDIO R IC401 # C420 # C557 R553 2.2 100 :FPRD 35V R567 2.2k :CHIP R807 C807 JW(5MM) C872 R806 330p 0.1 C814 0 C869 F:CHIP 0.012 1.2KV :CHIP 2kV B 0.1 C863 25V H CENT 0 F:CHIP D804 :CHIP BY228/A52A S800 PIN OUT 15 R878 1-572-707-21 8 7 6 5 1k :CHIP C852 C808 0.15 250V 0.0082 R808 C809 R879 0.01 2.2k R869 2.2k 200V 200V R860 C815 :PP 1 180k :CHIP :PT :FPRD :PT # :RN-CP R892 C870 :FPRD C861 # 220p 0.22 B:CHIP L801 L802 Q802 400V C853 C871 D805 1 2 3 4 R867 HLC IRF614-005 # JW(7.5mm) # UDZSTE-179.1B 18k R861 PIN OUT :RN-CP 0 R880 C866 :CHIP 100k 0.01 R863 :CHIP R881 F:CHIP R888 10k 33k 220K :CHIP R884 C859 :CHIP C858 :RN IC851 0.01 0.01 47k :CHIP R885 10K R887 F:CHIP F:CHIP MC4558CD 220K R866 R882 10k :CHIP :RN 1k 10k :CHIP :CHIP R886 R889 R805 JW(5MM) D408 # Q201 MSD601-RT1 R375 # IF C873 0.01 F:CHIP PIN OUT 9V C364 10 H+ 1 JR202 # C555 220 35V R554 2.2k :CHIP R383 # MONITOR OUT AUDIO L (MONO) V-OUT H- 3 2 NC R376 0 :CHIP R370 27k :CHIP D324 UDZSTE-179.1B R382 D317 # # C368 # IC850 NJM2903M GND D500 1SS119- 25 5V 7 6 5 D307 1SS355TE-17 D306 RD2.2ES-B2 DETECTION D333 UDZSTE-179.1B R333 470 :CHIP R331 0 :CHIP C319 0.1F:CHIP 25V C320 0.1F:CHIP 25V R329 560 C318 0. 1 F:CHIP C317 0 :CHIP C314 # DAT CLK 2 3 4 1 +B R803 2.2k 1/2W :FPRD JR214 0 :CHIP C208 22 R G B BLK R330 0 :CHIP VIDEO IF IF R054 4.7k :CHIP R049 4.7k :CHIP R052 4.7k :CHIP R048 4.7k :CHIP CN501 # FOR VM C803 220p 500V C801 B R801 0.001 22k B:CHIP Q800 2SC3209LK :CHIP H-DRIVE R380 C367 # # SW TVL C419 R447 # # IC551 AN5522 H- R315 SCL S DA 1 9V R812 R802 1K 3W:RS 1K 3W:RS R813 T800 1k HDT :CHIP R814 1K 3W:RS 1 C800 C804 5 C802 1 0.001 13 D800 0.022 500V 1SS119-25 200V B 4 3 PROTECT :PT GND C606 220 25V D602 S3L20UF4 D600 EG01CVI C603 1500 1.2KV 29 GND 30 D009 UDZSTE-179-1B 31 Q004 MSD601-RT1 32 VDR600 ERZV14D621 33 1 34 35 2 36 GND 37 GND 38 3 39 GND 40 R615 22k 1W :RS R506 150k 1/2W D853 1SS355TE-TE R800 1k :CHIP R371 C361 39k 2.2 :CHIP 16V F:CHIP R369 C362 1.2M 0.47 25V :CHIP F:CHIP IF R381 # R500 180K 1/2W C856 0.001 B:CHIP C626 0.047 200V :PT 41 2 42 3 D501 1SS119-25 R502 1.2 2W :RS R505 4.7k :CHIP R874 180k :RN C612 470P 250V 43 1 44 4 45 C611 1500P CH:CHIP R503 56k :CHIP C500 100 16V 135V L600 47UH :FLR50 46 9 R619 8.2M 1W R623 1.5k :CHIP R620 R628 4.7 :FPRD # C617 1000 25V 11V FB604 D607 D356M-F 1.1UH C620 470p 2kV B FB603 (FBI) IC602 SE135N D608 RU4AM-T3 3 2 1 C614 33 160V 3 IC604 PQ09RD11 47 10 8 # Q500 2SA1091-0 R504 56k :CHIP R378 # R379 # 9V C618 100 16V 48 7 R625 9V O 2 G 49 R612 D604 D1NL20U 1.8K 11 # I 50 C610 150 35V 4 1 51 13 470P 500V PS601 5.000A 12 R614 C616 # D314 GP08D 52 3 FB602 # R501 1.5K C624 # 53 14 R617 1k :CHIP C339 0.1 25V 54 C628 470p B:CHIP D316 # 11 R392 6.8k :CHIP Q319 # JR215 # Q520 # R352 # 55 4 PH600 PC123F2 – 29 – 28 15 5 D606 D1NL20U C619 470p 250V B CN605 # 27 R609 56K :CHIP R611 5.6K CN604 3P 26 R605 0.18 2W :RS D603 RD15ES-B2 R606 680:CHIP C609 470p B:CHIP 25 BLOCK E GND FB/OCP 1 3 5 D605 D1NL20U R601 # AUDIO VCC PS600 C627 IC LINK D609 2200 35V RN4Z 16 C613 R624 180K 1/2W V IN 24 4 FB606 # C625 UDZSTE-1727B CONT. 23 2 22 R626 # C FB605 JW(5MM) R621 # C615 470p 500V B 2 21 R603 R602 R627 0.68 0.68 0.68 10W 10W 10W C048 22 1 20 IC601 STR-F6706A C623 # FB601 # 19 4 JW604 # C601 0.1 275V :MPS R610 33k 3W FB600 # :RS R608 220K 1/2W C051 0.1 F:CHIP 25V 25V T601 SRT 18 C054 220 25V L601 1.0UH T600 TLF F600 T3.15A JW603 # C607 0.0047 500V E C602 330 450V OUT R377 # IF 0.1 F:CHIP R607 JW(15MM) C608 0.0047 D601 D3SB60F3 500V AC-RECT E C605 0.0047 500V E IN 17 JW600 # C604 0.0047 500V E GND 16 X001 CAS/4HG REF 15 C033 100p CH:CHIP C047 0.47 25V F:CHIP C049 RESET NC IC400 # C342 0.1 25V S IF IN DEC SOUND EXT S I N DEEMP BINTRDY GND F:CHIP R055 1k :CHIP C369 0.47 MPS R368 1k :CHIP D311 R389 330K:CH NNCD8.2A-T1 C351 RV300 # 470K 8V AUDIO IN 1 R J400 6P VIDEO FBT R350 390 VCOR FI L. TU AGC OUT XTAL R365 C357 0 :CHIP 0.001 B:CHIP C359 0.1 F:CHIP D325 C354 UDZSTE-179.1B 25V 0.0047 R366 # B:CHIP C355 C358 0.47 100p 16V CH:CHIP B:CHIP AUDIO IN 1 L (MONO) Q401 UN2216 JR204 # L311 # R363 0 :CHIP D310 1SS119-25 R356 3.3K VIDEO IN 1 D404 C407 R413 470k R411 UDZSTE-179.1B R412 220 1k 16V :CHIP 1k Q405 :CHIP :CHIP MSB709-RT1 C405 1 R409 D403 470k R403 R404 UDZSTE-179.1B 10K :CHIP :CHIP 1K :CHIP C404 1 R408 C403 R402 1 16V 1K R407 :CHIP 100 :CHIP D402 :CHIP 1K NNCD9.1A-T1 :CHIP R405 R406 JR400 Q403 10K 470K 0 Q402 :CHIP MSD709-RT1 :CHIP :CHIP UN2216 R393 0 :CHIP R347 # PLL I F DEC VERT. REF 3 C336 # Q318 MSD601-RT1 R354 820K R349 # VCO R FI L. AGC FI L RESET EXTAL STBY C334 # R346 # IF IN ITTRESET R344 # IF V OUT VERT. SAW TV SYNC C333 # SDA VC HD SW R416 R410 100 10k :CHIP :CHIP R355 R221 R353 820K JR303 3.3K 100 :CHIP # Q317 # SCL EHT/ X- RAY SIRCS C345 0.0033 B:CHIP C346 0.1 F:CHIP 25V K1 K2 F:CHIP R414 1k :CHIP AUDIO IN 2 R R426 1k :CHIP R521 R522 # # C338 # DECOUPLING IF IN KEY2 H SYNC C050 R046 0.001 B:CHIP 27K :CHIP C036 0.1 F:CHIP 25V R050 39K :CHIP R043 100 :CHIP R047 100 :CHIP IC002 C039 0.1 F:CHIP MM1319AFBE 25V 5V-REG C034 0.001 B:CHIP C037 100p CH:CHIP R045 C038 100p CH:CHIP 10k GND C046 :CHIP 0.022 R341 # LUMA IN 1 VERT. POS KEY1 C353 0.47 16V B:CHIP C350 # C349 1 16V CM301 # C IN1 VERT. NEG BRT ABL 56p CH:CHIP D008 # C343 15p CH:CHIP 11V MAIN SUPPLY EAST-WEST X-RAY F-SAP FORCED R056 1k :CHIP R421 1k R418:CHIP 100 :CHIP L R218 2.7K :CHIP R216 3.3K :CHIP C216 0.1 16V B:CHIP C240 C230 C215 2.2 2.2 16V 0.1 16V 16V B:CHIP F 14 13 12 11 10 9 8 7 6 5 4 3 2 1 R343 # R345 R339 100 D322 C380 270 :CHIP # :CHIP UDZSTE-179.1B C337 0.1 F:CHIP 25V C335 47 16V C329 0.1 F:CHIP 25V CVBS-IN I NT GND VDD R053 4.7k :CHIP D007 RD5.1SB-T2 R358 100 :CHIP 5 AUDIO OUT PHI 2 FI L STEREO IND R036 L002 2.2k :CHIP :FLR50 R044 220 :CHIP C044 D006 C045 RD5.6ESB2 3.3 7 4 GND PHI1 FI L XLC 6 5 81 DIGIDEC EXLC SAP IND X300 3.58MHz 4 SECAM DEC SSCP/FBT H SYNC 2 MODE SW1 R042 R072 4.7k :CHIP 390 :CHIP R041 # C063 47p CH R035 2.2k :CHIP C041 56p CH:CHIP IK MODE SW0 B CVBSI N EXT HOR.OUT 1 V SYNC C056 100P :CHIP VCC G MOMUTE 4 3 R340 0.01 F:CHIP D308 R390 1SS355TE-17 # B OUT CVBS SWOUT B-INT V-PULSE 3 PLL FI L R 2 R OUT SECAM TRAP 1 9 2 R342 0 :CHIP C331 # G OUT YS C312 12p CH:CHIP IC003 M24C08-BN6(A) R328 100 :CHIP 3. 58 II DAT1 R069 # C028 100p CH:CHIP C029 100p CH:CHIP C030 100p CH:CHIP R039 C042 100p CH:CHIP 560 :CHIP C043 100p CH:CHIP R040 # C031 100p CH:CHIP C313 # 5 ABL4. 43/ 3. 58 BLK 6 C321 4.7 RIN II DAT0 7 10 GIN SECAM OUT JW601 10MM 3 1 II CLK1 VIBRATOR CERAMIC 1 AC IN II CLK0 VM MUTE O SPMUTE 8 C316 47P :CHIP B C315 2.2 D323 UDZSTE-179.1B Q315 MSD601-RT1 G 1K :CHIP G R058 C052 100 470 :CHIP 10V C059 # R038 R075 1K :CHIP R070 # # C035 0.001 B:CHIP R R327 R B I N SW B- Y I N 1 2 2 VOLUME PIC ROT R068 # 7.5V S600 1-571-433-31 :PUB AC IN L/H R027 150k :CHIP C621 4700P 250V CN602 1P :VH C023 100p CH:CHIP C024 0.001 B:CHIP C022 100p CH:CHIP D305 1SS355TE R057 100 :CHIP C055 220p B:CHIP R051 10k :CHIP L001 :FLR50 C053 470 10V C040 # C032 0.0015 JR002 B:CHIP JW005 # # R037 1K :CHIP C026 0.001 B:CHIP C060 # C027 0.001 B:CHIP R071 # C322 # B I N R- Y I N C018 2.2 JW602 10MM 2 27UH LUMA I N R-Y OUT LUMA OUT B-Y OUT R600 470 3W :RS CN601 2P AGC U/V 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 3 RED LED 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 3 GREEN LED 8 2 7 1 NC D004 4.7k :CHIP 1SS119-25 R025 4.7k :CHIP C600 0.0047 500V E THP600 PTC S.SOUND SW AUDIO SW R028 2.2k IC004 :CHIP SBX3081-21 D005 C020 470P R032 1k :CHIP 5V 1000P 500V B:CHIP B:CHIP C017 C021 R029 D003 # 47 0.001 16V 100 :CHIP B:CHIP 1 2 R077 100:CHIP R030 # 3 R024 R031 100 :CHIP 100 C019 :CHIP UDZSTE.175 R026 MP 6 JW181 15MM JW182 # DGC M 5 Q003 MSD601-RT1 VDD GND I 4 TIMER D001 SPB-25MVWF DGC IC001 D/K NC CXP85224A-080S 3 Q001 UN2213 CN600 2 R010 330 :CHIP C025 2.2 16V F:CHIP B/G R021 1K :CHIP R064 1K C014 0.001 B:CHIP C058 220p B:CHIP C004 R076 # R065 1K 0.001 GREEN B:CHIP C062 # R066 RED R022 1K 1k :CHIP C057 220p B:CHIP C008 # RED C009 0.001 B:CHIP R014 R016 2.2k :CHIP C010 100p CH:CHIP 330 :CHIP GREEN R017 1k :CHIP R015 100 :CHIP C011 R018 100p CH:CHIP 2.2k :CHIP C006 0.001 B:CHIP R011 R019 2.2k :CHIP 0 C016 :CHIP 100p CH:CHIP R013 R020 68 :CHIP 2.2k :CHIP C012 R012 0.001 B:CHIP C003 C013 1k # :CHIP 0.001 B:CHIP Q002 UN2213 2P :MINI C015 0.001 B:CHIP C007 0.001 B:CHIP C005 0.001 B:CHIP 1 F FB001 (FBI) R033 10k :CHIP R034 2.2K :CHIP 5V D002 # L310 D303 # VOL - R009 330 :CHIP Q314 UN2211 SWITCH D302 # # 14 JR211 # NICAM ST/BY RESPONSE S002 S004 S005 SEL TV/VIDEO VOLSEL TV/VIDEO D304 MA8024 1 R338 13 Q005 UN2213 C328 0.22 F:CHIP 25V 12 R005 560 :CHIP Q316 # 11 R004 2.7k :CHIP C061 0.0022 B:CHIP 10 R002 8.2k :CHIP R073 22k :CHIP C307 # 9 CH + 5V VCC R419 39K :CHIP R415 10k :CHIP C406 1 16V F:CHIP J401 3P AUDIO IN 2 L (MONO) R432 R433 56k :CHIP 1M :CHIP C411 0.1 25V F R431 56K :CHIP C410 R435 1M 100 16V :CHIP R425 75 C409 D407 :CHIP 0.1 UDZSTE-179.1B F:CHIP R424 25V 56k :CHIP PROTECT R423 C408 R422 R440 39k 0.1 56K 1M :CHIP 25V F :CHIP:CHIP D406 UDZSTE-179.1B R443 R417 1M R420 PROTECT 68 :CHIP 1k D405 :CHIP :CHIP NNCD9.1A-T1 C425 68P CH:CHIP 9V C428 # C429 # 8 VIDEO IN 2 R437 # R436 75 C414 0.1 F:CHIP 25V 7 Q406 MSD601-RT1 MIXER 15 16 17 18 19 20 21 22 23 24 25 26 27 28 C214 0.1 16V B:CHIP C229 0.47 R215 C217 3.3K 0.022 :CHIP JR207 C228 R217 C223 # 1 2.7K C226 4700P :CHIP :CHIP 4.7 C227 47 16V 8 JW220 12.5MM CH - 2 9V Q321 # R324 470 :CHIP 7 S006 CH+ VOL + 1 C370 0 :CHIP 6 R074 1k :CHIP R006 560 :CHIP DGCT CF345 F4.5C 5 7 DGCT CF355 (F5.5C) 4 R/G/B R003 R001 8.2k :CHIP 2.7k :CHIP H Q320 UN2211 VIDEO S001 S003 VOL+ CH- G AUDIO C371 10 V- 6 OUT GND 6 VIDEO Q309 MSD601-RT1 R316 180 :CHIP SW TVL V+ 5 5V C427 # D327 1SS355TE-17 GND R063 1K :CHIP B:CHIP R325 22K :CHIP VIF/YC/J D318 1SS355TE-17 CF360 (F6.0C) D301 ISS355TE-17 R312 220 :CHIP R062 1K :CHIP R321 # R320 22K :CHIP R318 22K :CHIP JR301 0 :CHIP R326 22K :CHIP 4 R008 4.7k :CHIP K2 22K :CHIP 3 C001 470p B:CHIP 2 GND K1 IC403 # JACK CF365 (F6.5C) R401 1k C400 :CHIP 220 D410 16V # R400 # 11V C402 # D400 1SS355TE-17 5 6 R445 47k :CHIP C412 22 25V R430 R428 470 3.9k R434 :CHIP :CHIP 1k :CHIP R2 L OUT 1 R/G/B SDA SCL R007 4.7k :CHIP R301 220 :CHIP Q311 MSD601-RT1 R322 # Q304 MSB709-RT1 D401 1SS355TE-17 2 L306 Q308 1.8UH C308 UN2216 390 C310 R313 CH:CHIP L304 330 390 JR300 C309 12UH :CHIP 330P :CHIPQ310 CH:CHIP # UN2216 R317 470 :CHIP Q312 L307 CT365 L308 UN2216 2.2UH (T65B) 2.2UH R319 R314 R323 470 L305 330 470 :CHIP :CHIP 12UH :CHIP B L302 8.2UH D203 1SS355TE-17 Q313 C311 470P B:CHIP UN2216 SWITCH L309 2.7UH R429 10k :CHIP C435 220 16V C401 # C418 100 16V R438 1k :CHIP IC402 MC4558CD R427 1.2k :CHIP L400 47UH C209 1000 25V C210 22 25V C813 330P 2KV B:CHIP AUDIO(L) Q300 MSB709-RT1 BUFFER 1 SP L GND GND SP R D202 1SS355TE-17 11V IF R131 # R127 # HP R G B BLK C237 560 35V AUDIO(R) R211 220 4 Q407 MSD601-RT1 MIXER D201 # Q204 2SA1162- YG L C243 AUDI O VCC 1000 35V GND R214 0 :CHIP Q400 MSB709-RT1 AC MUTE IF R132 # 14 C426 68P :CHIP R446 47K :CHIP 3 2 1 JW020 # C363 0.0047 B:CHIP Q208 DTC144EKA NC R IN RF GND L IN NC/ VOL OUT L MUTE GND VCC STAND- BY OUT R C233 # C238 5MM R248 68K R224 # R227 # R244 470K:CHIP R223 # R230 1.5K R234 :CHIP 470K :CHIP Q202 2SK208-GR-TE852 R238 # R212 1k:CHIP C211 0.47 IF Q956 # VM MUTE R126 # 13 1 2 3 4 1 2 3 4 5 6 7 8 Q962 # BUFFER R385 # R384 # R932 # R386 # R388 # AUDIO(R)R387 # OUT IN AUDIO(L) SYSTEM GND R113 2.2K :CHIP C115 0.0047 B:CHIP OUT D964 # CORING CT139 TRAP CERAMIC C112 # C922 Q961 C304 # Q922 Q923 R962 150p # # # C924 CH:CHIP B # AMP R966 R924 EQUALIZER # AMP R936 R927 # R925 # C962 R923 R968 # # # # 9V C923 # # # R977 R983 # R986 R988 R929 R980 Q924 D963 # # # # # # # JR900 R954 G D966 CORING AMP Q964 # # Q966 # # # C971 C951 # R970 AMP C976 AMP R931 # # # R930 # # R978 R989 # R981 D965 R987 # R C977 R953 R951 C980 # # C974 # # # # 9V # # D200 DA204K C201 0.022P B:CHIP R203 470 R204 C203 :CHIP 3.3K :CHIP 2.2 SPACE SOUND C241 R207 S R205 12K 0.0047P IC203 # R210 :CHIP B:CHIP AN5276 C207 220 AUDIO AMP R246 # C204 1000 R245 Q203 C234 MSD601 # C200 25V 0.47 0.022P :R-CH 0.001 :RN 16V B SPACE R201 1.5K R200 R229 R228 1.5K SOUND :CHIP 3.3K :CHIP 0 :CHIP C205 1 2 3 4 5 6 7 8 9 10 11 12 R202 R206 R231 R235 2.2 C236 C213 47K 12K 1K 0.047 470K 0.01 B:CHIP C206 :CHIP :PP :CHIP R240 R247 C202 100 JR210 15k :CHIP R249 # C235 0.001 0 :CHIP R241 1K # R208 :RN R209 C242 15k :CHIP JR209 10K C212 0.0047 10K R243 # :CHIP :CHIP # B:CHIP 10k :CHIP C239 JR213 R242 Q205 # # 10k D300 UN2211 :CHIP JW(5MM) R225 15K VP R061 220 :CHIP FOR TEXT 50/60Hz 110-240V AC IF L200 47 GND 7.5V J 5 L921 L922 # # R991 D961 # # R984 AMP # L962 # R310 R308 390 G 120 :CHIP :CHIP R302 R304 1.2K 220 CT360 (T60B) :CHIP :CHIP Q305 Q303 C300 MSB709-RT1 MSD601-RT1 47P Q301 R CT355 MSB709-RT1 :CHIP (T55B) R307 BUFFER C301 R311 220 :CHIP C306 27P :CHIP 2.2K 0.0047 R300 R306 220 :CHIP :CHIP B:CHIP 390 :CHIP L300 L301 C305 100 18UH 12UH L303 8.2UH D319 1SS355TE-17 16V R309 D320 1SS355TE-17 R303 C302 Q306 47P 150 220 MSD609-RT1 :CHIP C303 :CHIP D321 1SS355TE-17 Q302 :CHIP 68P :CHIP CT345 D326 # MSB709-RT1 R305 T4.5C BUFFER 680 :CHIP CN002 # I 4 JR100 # R926 # D104 DA204K PROTECT C002 470p E 1 2 3 D100 1SS356-TW11 R922 R921 L923 # # C972 # # 12 CN200 4P J200 JACK EAR PHONE Q307 MSD609-RT1 C120 # SWF100 SAWF R928 # 11 R1 TVR FOR TEXT 1 2 3 4 5 6 7 Q102 2SC3779C,D-AA AMPLIFIER L103 0.33UH Q103 R109 56P UN2216 :CHIP SWITCH C117 56P CH:CHIP R107 3.9K :CHIP Q106 MSD601-RT1 VC AMP R116 # TO C BOARD CN703 TO A3 BOARD 10 TVL R OUT L1 GND L2 9V MON L CREF IN L SDA MON R SCL IN R GND M I N( R) TRE( R) M OUT( R) TRE( L ) B I N( R) M I N( L ) B OUT( R) M OUT( L ) B I N( L ) B OUT( L ) D CN001 # R G B BLK GND SDA SCL R059 220 :CHIP R060 220 :CHIP CN300 6P CN302 # 9 3 CN003 4P S:MINI R108 470 :CHIP R119 22k :CHIP GND 1 FOR JIG C110 # AGC TU / NC / ENA U/ V/SCL L/H /SDA +B / NC C105 C104 AFT / 5V 0.1 25V F 0.1 25V F PWM /NC 33V /30V I F2/ NC I F1 C101 10 1 2 3 4 IC101 # O L101 1.2UH R130 R111 R112 1K 10K 6.8K :CHIP :CHIP :CHIP C116 R114 0.0047 2.2K B:CHIP :CHIP Q104 CT131 UN2216 I TRAP G CERAMIC SWITCH R105 Q100 # C130 MSD601-RT1 # BUFFER R125 C108 9V R128 22k 1000 16V 33V 3W 100 :RS :CHIP Q105 L100 C121 MSD601-RT1 C106 C129 100p R124 0.001 VC AMP 0.0047 R117 :FLR50 C128 R133 22k 22k CH:CHIP B:CHIP 4.7 :CHIP R100 B:CHIP C107 22 C109 R123 1k :FPRD 0.0047 :CHIP 470 D103 22K :CHIP B:CHIP 16V UPC574J :CHIP R118 R121 C125 C127 470 22K R115 0.1 100P 4.7K :CHIP :CHIP :CHIP :PETP CH:CHIP C131 C122 C126 C119 C124 C118 10p 2200p D101 0.068 :PT 0.068 :PT # # B:CHIP CH:CHIP # R120 R122 D102 1.8K 330K # :CHIP :CHIP GND 1 GND B INT B DAT B CLK L102 0.22UH 33V C103 0.1 25V F C C111 0.001 B:CHIP R135 0:CH C102 0.1 25V F FB100 CN101 FILTER # NOISE GND 1 Q101 # AMPLIFIER R104 # R103 R129 33 22 :CHIP :CHIP R106 4.7K :CHIP 8 2 B R134 0:CH R101 # 7 TP300 9V C100 0.001 B:CHIP C113 # R102 # TU100 BT-AG402 R- I N GND SDA SCL RESET Q M-SW GND CN301 # 1 2 3 4 5 6 7 A 6 GND I F- OUT GND 9V AFT L- I N GND 5 1 2 3 4 5 6 7 4 ( R511 15K :RN R509 0.47 1/2W :FPRD C507 470p 500V B 200V R510 220K 1/2W C508 33 250V R512 22K R568 47K C509 0.033 200V :PT R513 10K :RN-CP ( 3 56 2 1 1 POWER SUPPLY, DEFLECTION, AUDIO AND VIDEO PROCESSING, AV INPUT/OUTPUT AND MICROCOMPUTER B-SSS11081-PAKISTAN-A..-HA21M80 KV-HA21M80 RM-969 (2) CV Board Schematic Diagram 1 2 3 4 5 6 7 A CN702 1P :TAB (RGB AMPLIFIER ( B G2 C 1 R715 1.5k 1/2W R714 8.2k 3W :RS Q706 2SC2611 R AMP D709 1SS119-25 Q709 SPEED UP 2SA1091-0 FEEDBACK C702 0.001 B E R734 100 1/2W KGKB G2 C710 470p B PICTURE TUBE F CV KRG1 G4 HV A51LPT70X H GND 4 NC 5 H1 Q708 2SA1091-0 FEEDBACK C708 470p B C709 470p B R721 # C737 # R710 8.2k 3W :RS D701 1SS119-25 SPEED UP R760 JW(5MM) Q707 2SA1091-0 FEEDBACK D707 1SS119-25 SPEED UP R720 JW(5MM) R716 1K R719 # R717 1K GND CN706 # TO A BOARD CN505 B G JW701 # Q710 2SC2785TP-HFE B AMP R727 2.2k CN704 1P :TAB C714 560P R730 180 1 Q711 2SC2785T-HFE G AMP R726 2.2k B IN 1 G IN 2 R IN 3 1K VM IN GND 8 9V CN703 6P TO A BOARD CN300 +B NC GND 3 L1700 # R1764 # Q1767 # BUFFER # NC 3 VM CN1702 # TO VM COIL C706 47 16V C1770 # Q1763 # VM D1767 # R1772 # R1765 GND 2 R706 680 :RN D715 D714 R707 1SS119-25 1SS119-25 470 STOPPER STOPPER :RN R1769 # C1763 # 1 C717 47p CH D713 1SS119-25 STOPPER C1762 # R1763 # R1851 # C1784 # D716 1SS119-25 CLAMP C719 680p B C1764 # CN1701 # R755 1.2k R740 100 D717 NNCD9.1A-T1 CLAMP C1761 # -2 R739 100 R L1761 # JW702 # R731 150 G C716 100 16V C712 470P B R738 100 B C1760 # 1. 2 R728 180 R732 150 5 C718 6 100 16V 7 -2 R725 2.2k R756 1.2k C713 560P R729 180 R757 1.2k GND 4 I D702 1SS119-25 SPEED UP R722 JW(5MM) R733 150 H NC 3 1 200V Q712 2SC2785T-HFE R AMP GND G R708 0.68 3W :RS Q704 2SC2611 B AMP D708 1SS119-25 SPEED UP R718 1K R723 # 200V 2 CN701 5P :S-MICRO C736 # Q705 2SC2611 G AMP R724 JW(5MM) R 1 TO A BOARD CN500 L711 JW(5MM) 200V R712 8.2k 3W :RS D703 1SS119-25 SPEED UP G2 R705 # R761 JW(5MM) C703 4.7 250V 1 L712 JW(5MM) L710 10UH R762 JW(5MM) D 3 2 4 R711 1.5k 1/2W R713 1.5k 1/2W . C704 0.022 400V :PP C701 0.0047 2kV E R703 100k 1/2W G4 1 11 G2 2 3 1 G1-1 J701 RCV SOCKET 4 3 5 H1 10 13 RV702 6 H2 4 110M 11 7 G1-2 G1-3 10 9 8 9 5 KB KR KG 6 8 7 FV FOCUS C746 # L701 22UH :EL0607 200V C1768 # R1775 # D1768 # C1778 # C1779 # Q1765 # AMPLIFIER 1 R1782 # R1776 # C1773 # R1779 # R1785 # C1775 # R1812 # Q1777 # STANDBY MUTE R1774 # C1769 # R1790 # B-SSS11081-PAKISTAN.-CV.-HA21M80 J – 31 – KV-HA21M80 RM-969 5-4. VOLTAGE MEASUREMENT A BOARD VOLTAGE LIST Ref IC001 IC002 Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 1 2 3 Voltage[v] (4.6) [0] 0 0 (0) [4.5] 4.8 (0) [4.9] 0 0 4.9 4.6 0 0 0 4.7 4.9 0 4.7 0 (0.9) [1.8] 0 4.9 0 (0) [4.9] (4.9) [0] 0.4 3.6 0 (0.8) [1.6] 4.9 4.7 4.9 0 4.9 2.3 2.1 4.9 0 (2) [4.8] (0.3) [1] 4.9 4.9 (3.4) [3] (0.9) [1.6] 4.9 (4.9) [2.6] 4.9 0.4 4.7 0 0 0 0 4.9 4.5 4.9 4.5 3.6 (0) [0.3] 8.9 (0.1) [8.9] 0 0 4.9 4.9 0 4.9 4.8 Ref IC003 IC004 IC101 IC201 IC203 IC301 Pin No 4 5 6 7 1 2 3 4 5 6 7 8 1 2 3 I G O 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 Voltage[v] 11 4.9 0 0 0 0 0 0 4.9 4.9 0 4.9 4.7 3.6 0 9 0 0 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 0 4.6 4.6 4.5 9 0 3.8 3.8 4.5 0 0 20.3 0 0 0 (*) [9.8] 0.4 0 21 9.7 9.7 (0.9) [1.1] 3.7 0 0 (2.4) [3.6] (2.9) [4.4] 4.6 4.5 – 32 – Ref IC402 IC520 Pin No 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Voltage[v] 6.6 0 3.3 8.2 (3.8) [4.6] 0 3.1 (0.2) [0.5] (3.3) [3.9] 6.7 (2.8) [3.1] (2.7) [2.9] (2.8) [3] 3.3 3.4 3.4 3.4 0 (2.7) [2.9] (2.7) [2.9] 2.3 2.4 2.3 2.4 0.3 2.4 2.4 (4.8) [4.3] 8.2 2.5 4.9 1.5 0.64 3.1 3.9 0 4.1 1.3 1.4 4.6 4.6 1.6 3.7 3.8 (4.6) [1.2] (4.2) [8.2] 2.9 (3.2) [4.1] 5.5 2.5 2.5 0 (9) [2.5] (5.5) [2.5] (2.5) [5.5] (2.4) [9] 9.4 5.8 5.8 0 2.2 2.2 2.2 11.6 KV-HA21M80 RM-969 A BOARD VOLTAGE LIST Ref IC551 IC601 IC602 IC604 IC850 IC851 Q001 Q002 Q003 Q004 Q005 Q100 Q102 Q103 Q104 Q105 Q106 Pin No 1 2 3 4 5 6 7 1 2 3 4 5 1 2 3 1 2 3 4 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E Voltage[v] 0.5 13.6 -12 -13 0.2 13.7 0.5 * * (*) [159] (*) [7] (*) [2] (*) [118] (*) [135] 0 (11) [11.6] 9 0 4.7 2.1 0.7 1.5 0 2.5 2.1 5.8 9 (2.3) [2.7] 3.2 3.2 (0) [0.1] (0) [2.8] (2.6) [2.8] 3.7 9 0 4.9 0 0 4.9 0 0 4.9 0 0.1 4.9 0.1 0 4.7 (0) [0.2] (3.6) [7.4] 9 (4.2) [8.1] 3.1 2.4 9 0 3.2 0 0 (0) [5.5] 3.2 0 (9) [0] (0.3) [0.6] 0 3.8 0.6 Ref Q201 Q202 Q203 Q204 Q205 Q208 Q300 Q301 Q302 Q303 Q304 Q305 Q306 Q307 Q308 Q309 Q310 Q311 Q312 Q313 Q314 Q315 Pin No B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E Voltage[v] 5.6 9 6.2 (6) [3.3] (0) [1.3] (13) [13.4] (5.5) [5.2] 13 (6.1) [5.8] 21.4 21.4 20.7 0 0 (4.7) [0.7] 1.3 1.4 4.8 (3.1) [0.2] 0 0 (3.2) [4.1] 0 (2.4) [4.8] (0) [4.1] 0 (3.8) [3.6] (2.4) [4.8] (7.8) [4.8] (3.0) [5.5] (3.0) [5.8] (2.4) [4.8] (0) [9] (2.9) [5.8] (2.3) [4.8] (2.3) [9] 9 9 (2.9) [4.3] 9 9 (2.9) [4.4] 0 9 0 (2.3) [9] 9 (2.9) [0.1] 0 9 0 (9) [3.5] 9 (2.9) [4.4] 0 (0) [9] (3.8) [0] 0 (8.9) [0] (0) [3.3] 0 0 4 2.7 9 0 – 33 – Ref Q316 Q317 Q318 Q319 Q320 Q400 Q401 Q402 Q403 Q404 Q405 Q406 Q407 Q500 Q520 Q800 Q801 Q802 Q850 Q851 Q922 Q923 Pin No B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E B C E D G S B C E B C E B C E B C E Voltage[v] 0 4.9 0 0 9 0 2.6 6.2 3.2 3.8 (8.2) [0.2] 4.4 0 (3.3) [5.4] 0 11.4 (1) [4.4] 11.6 0 (0.1) [0] (0.1) [0.2] 0 (0.1) [0] (0.1) [0.2] 5.2 0 4.5 5.2 0 4.5 5.1 0 (4.4) [4.5] 1.8 4.2 2.5 3.5 9 4.2 (*) [133.7] 0 (*) [133.6] 0.6 0 0 0 (*) [30] 0 (0.1) [0] (*) [99] (*) [0] (5.6) [10] (8) [5.5] 0 5.6 9 5.9 5.6 0 5.7 2 5.3 2.7 (1.4) [1.9] (2.5) [9] (2.1) [2.4] KV-HA21M80 RM-969 A BOARD VOLTAGE LIST Ref Q924 Q956 Q961 Q962 Q964 Q966 Pin No. B C E B C E B C E B C E B C E B C E Voltage[v] (5.5) [0] 9 (6.1) [8.5] 0 0 0.6 (1.9)[1.4] (9) [2.4] (2.5)[2.1] 8.3 3.2 7.7 0.9 6.6 1.5 1.0 6.1 1.6 CV BOARD VOLTAGE LIST Ref J701 Q704 Q705 Q706 Pin No. KR KG KB H2 G2 B C E B C E B C E Voltage[v] (110)[102] (112)[104] (103)[96] (0.1)[0] 218 (8.7)[9] (105.8)[96] (8.1)[8.4] 9 (112)[104] 8.3 9 (111)[103] 8.4 Ref Q707 Q708 Q709 Q710 Q711 Pin No. B C E B C E B C E B C E B C E Voltage[v] (105.6)[96] (7.8)[8.2] (102.5)[95] (112)[104] 8 (109)[102] (111)[102] (8.1)[8.3] (108)[100] 2.9 8.4 (2.2)[2.4] (2.7)[2.9] 8.4 (2.1)[2.3] – 34 – Ref Q712 Q1763 Q1765 Q1767 Q1777 Pin No. B C E B C E B C E B C E B C E Voltage[v] 2.8 8.4 2.1 133.9 68.9 134.5 0.9 68.9 0.3 5.5 9 4.8 0.7 0 0 KV-HA21M80 RM-969 5-5. WAVEFORMS A BOARD WAVEFORM 1 PAL 1 NTSC3.58 2 PAL/NTSC 3.58 3 PAL 3 NTSC3.58 4 PAL/NTSC 3.58 5.84Vp-p 3.76Vp-p 4.96Vp-p 3.84Vp-p 4.08Vp-p 1.4Vp-p 5 PAL/NTSC3.58 6 PAL 6 NTSC3.58 7 PAL/NTSC 3.58 8 PAL/NTSC3.58 9 PAL 1.2Vp-p 1.64Vp-p 1.2Vp-p 1.2Vp-p 1.12Vp-p 3.16Vp-p 9 NTSC3.58 10 PAL 10 NTSC3.58 11 PAL 11 NTSC3.58 12 PAL 2.56Vp-p 3.2Vp-p 2.64Vp-p 3.2Vp-p 2.92Vp-p 416Vp-p 12 NTSC3.58 13 PAL/NTSC 3.58 14 PAL/NTSC3.58 15 PAL/NTSC3.58 420Vp-p 152Vp-p 80.8Vp-p 6.08Vp-p 2 PAL 2 NTSC3.58 CV BOARD WAVEFORM 1 PAL 1 NTSC3.58 114Vp-p 96Vp-p 116Vp-p 94Vp-p 3 PAL 3 NTSC3.58 4 PAL 4 NTSC3.58 104Vp-p 92Vp-p 17.8Vp-p 19.2Vp-p – 35 – KV-HA21M80 KV-HA21M80 RM-969 RM-969 5-6. PRINTED WIRING BOARDS AND PARTS LOCATION PRINTED WIRING BOARDS NOTE: The circuit indicated at left contains high voltage of over 1220 Vp-p. Please pay attention when inspecting or repairing it to prevent an electric shock. [POWER SUPPLY,DEFLECTION, AUDIO AND VIDEO PROCESSING, AUDIO/VIDEO INPUT/OUTPUT AND SYSTEM CONTROLLER] A – A Board – 1 2 3 4 5 6 7 8 9 10 11 12 A BOARD 13 IC C1505 C242 C241 JW027 C1503 R1508 R1505 R1501 R437 JW019 R214 JW020 C018 R025 D004 C043 JW016 C021 R029 C003 C012 C006 C057 R032 R015 C011 R017 R119 C044 C052 JW013 JW014 C045 D006 C001 R057 R050 D008 C047 JW011 JW017 R118 R047 R043 R045 L002 JW041 C048 R056 R049 R054 R052 C030 R048 C035 C027 R070 C040 JW220 R379 R053 R073 JW048 JW047 JW010 JW015 C033 C046 C038 C037 C034 C039 C036 R036 R046 JR036 R042 R039 C063 R016 C009 C004 R059 JW023 JW024 D304 R071 D002 R076 R116 R953 R075 C059 R013 JW033 JW034 D102 C005 C014 C007 C015 JW039 JW040 C026 C053 R951 JW049 JW050 JW051 C612 JW228 EY034 EY035 EY036 C604 D104 D800 DY1 JR012 S006 C861 D851 C510 C860 C602 EY033 JW093 EY045 JW226 JW227 R627 JW229 CN606 CN605 C615 D609 L601 C620 EY041 EY042 D608 C866 R884 Q800 D802 JW193 R885 JW021 JW032 D203 JW035 JW037 JW036 JW038 JW056 D316 C050 D202 C402 D410 JW057 R018 JW059 JW058 JW060 JW061 D306 R929 C976 D965 C980 D963 R923 R970 C617 R381 C060 R207 C400 R401 C237 JW062 JW064 JW065 JW063 R601 JR002 JW066 R926 R928 C520 JW090 C856 R879 Q106 C852 C367 R242 R240 C239 R204 R203 C235 C214 R224 D321 C304 R932 R524 R523 C128 JW089 JW088 C857 JW222 JW221 C238 C217 C219 C215 JW076 C314 C313 R072 C322 JW078 R327 C321 C371 D320 D319 JW080 R378 R390 R358 R377 X300 X301 R361 JW113 JW194 JW109 R125 JW205 RV300 JW145 JW114 JW115 D312 R389 D100 C216 C218 C224 JW077 JW191 L300 C318 D331 D333 C346 C345 C352 R362 D325 R113 R112 R925 C306 C380 JW117 R300 R449 JR037 C327 C328 R338 D322 C358 C356 R366 C359 C361 R371 C363 R375 C362 JW081 C302 R394 C335 R374 C337 D329 D309 JW138 R345 C364 JW146 C061 R315 R318 R325 R309 R320 R326 C372 JR007 R301 C310 L308 L309 C311 R313 C308 L306 JR034 C370 CM301 R359 C301 R347 L307 L311 C333 R384 R107 L103 C115 L200 JW124 JW125 R349 C338 CN003 C366 JW133 R129 R238 C223 JW200 C229 C226 C228 JW122 JW123 JW127 JW128 JR215 JW154 C427 JW190 JW153 JW189 R387 JR303 R351 R403 C404 R415 JW156 JW126 C435 JW129 C412 JR015 C424 JR014 JR214 C426 R446 R445 C422 R414 R405 JW152 R221 R365 JW111 EY401 EY032 D853 C407 JR203 Q103 C809 C867 C614 R105 D323 C613 JW201 C130 D803 C863 JW170 C430 R222 R108 C116 R382 R867 R862 D607 C418 JW206 C859 JW188 PS600 R102 JW149 Q102 Q104 R380 C811 IC604 R407 Q401 TU100 L802 C368 FB604 C107 C342 R865 EY117 C607 C117 R383 R617 R886 R603 C608 R392 R892 JW105 EY112 EY046 R006 C351 JW217 C109 SWF100 R812 EY043 EY111 EY114 IC851 R893 C562 JR035 JW196 R602 EY044 EY113 S003 EY037 FB601 FB602 PS601 EY040 R003 EY102 EY103 C875 C874 R878 R880 EY400 R001 R800 JW092 R882 JW182 JW181 R619 C108 C106 D403 C300 D201 FB001 S001 JW094 EY038 Q001 EY039 C624 Q002 C348 C800 R869 C618 D315 D310 C521 Q923 CN604 S005 C868 EY085 C8 13 L803 R009 R625 R364 D311 R962 Q520 Q962 D324 R354 Q318 R356 L101 IC520 C347 D314 R614 R357 C962 C971 R348 R106 JR304 Q402 JW151 R367 C049 R397 C330 D332 CN301 JW144 C054 IC002 JR211 R024 C810 JW211 R010 JW195 R005 JW004 R124 R620 JW186 C951 Q964 R395 IC301 R526 R936 C972 Q005 Q322 JR019 JW118 C320 C428 R388 D805 Q966 L303 C332 C429 CN302 Q802 JW006 R123 R012 C627 C616 JW106 R567 R881 C561 R563 R810 68 0 C812 EY086 Y E C807 R004 S004 C056 D010 R968 R991 R966 C808 C002 JW007 C125 C974 R981 R978 R977 R984 JW147 JW008 Q105 C121 JW012 JW003 FB603 R888 C055 R007 C319 R312 JW134 R316 Q323 D402 C801 R988 C977 JW209 C042 C307 D326 L301 C305 L310 Q314 CN300 R989 CT355 D404 R100 C315 R341 D301 CT360 JR018 C101 R061 C309 Q305 Q303 JW052 R117 IC003 CT365 R307 R980 C029 R008 D961 C802 JW005 R983 R002 JW009 C122 C051 C032 C031 L001 R074 R520 X001 R058 Q304 Q208 JR030 D966 R954 R035 C605 L600 EY092 JR017 EY051 FB605 EY050 C621 JR003 D009 F600 JW603 JW604 EY021 D603 EY023 EY020 EY022 VDR600 C501 R610 D502 C502 JW099 JW901 C509 JW900 C557 C619 JW902 EY104 EY105 C610 JW096 R611 R500 R505 Q500 C558 R559 R503 C500 C559 C555 C554 D503 JW904 D552 JW903 D602 R615 JW095 PH600 JW199 C503 R553 JW905 JW208 EY047 EY002 EY001 C606 EY048 JW045 R515 C508 R557 IC601 EY049 S600 IC551 JW098 JW102 EY003 C601 JW907 EY004 R609 EY119 JW046 C609 JW197 3 R504 C552 D604 EY108 T600 T5 0 R506 D553 D600 C603 C625 JW906 JW601 C611 JW097 EY120 – 36 – JR001 EY007 EY024 JW101 JW100 C 6 R605 EY081 00 R509 C507 D504 L500 D605 JW600 EY084 CN600 R600 EY025 C556 C504 R508 EY070 EY010 JW602 C019 R507 EY008 C017 EY063 CLP003 EY009 EY017 EY109 R623 C506 R513 EY011 EY005 EY064 EY110 THP600 EY019 R606 I EY052 EY012 EY018 EY006 EY053 EY026 R624 R510 CN500 EY027 R626 C628 R558 R568 EY028 D606 EY060 EY029 R612 R512 EY030 CN602 C505 CN501 JW198 D501 R501 EY031 D001 JW185 CN601 R608 EY058 EY059 EY061 E1 JW230 JW104 EY062 J C623 JW179 R607 EY088 EY057 L501 EY087 IC004 EY091 EY013 D005 EY089 EY014 D003 R874 EY090 EY015 IC602 R502 EY056 EY016 D601 C626 D500 C865 EY118 D854 T601 R516 H R870 C511 R860 R564 R565 R514 R511 R628 EY055 IC001 IC002 IC003 IC004 IC101 IC201 IC203 IC301 IC400 IC401 IC402 IC403 IC520 IC551 IC601 IC602 IC604 IC850 IC851 PH600 D-12 E-10 E-10 I-13 D-3 B-7 A-10 D-6 B-3 A-2 A-2 C-2 E-7 J-6 J-8 H-7 G-8 G-6 G-6 H-7 TRANSISTOR R055 C041 D007 JW091 S800 C 8 14 R041 R044 Q300 Q301 C401 Q003 IC001 C225 C423 C419 C421 C240 C405 D101 D409 C102 JW022 C233 D408 R419 IC201 JW121 EY100 C410 C420 D405 C234 C236 JR210 JW164 C131 D200 Q004 C201 D300 C207 R331 R330 CN001 D406 EY101 R329 CN002 JR205 C232 R244 C211 R432 C227 R426 R406 R431 J200 R115 C203 C206 C208 JW018 S002 R127 Q204 Q205 C210 R210 R027 R020 C020 R131 C243 C212 C221 R413 R1506 JW210 C024 R409 Q1503 R026 C023 R030 R077 R028 R031 JW192 JW053 C028 R132 IC203 R434 R417 C202 C209 R440 R247 C205 R1504 R1503 J401 R019 JR033 Q956 D964 D520 C127 D103 R805 R1509 J400 C1504 R411 CN1501 C022 C013 C016 C008 C062 R066 C058 R022 JR013 R040 C025 JW054 R987 R435 R051 C010 C120 R021 R065 R064 R062 R063 C922 R922 D521 R522 L962 R861 R883 CLP001 R921 C870 IC850 R433 R033 JW213 D318 R038 R068 R211 CN200 R034 D400 R400 JW214 R930 R924 JR900 L923 C871 JW174 Q316 Q850 Q851 EY116 R212 R205 D401 D307 R333 Q924 Q922 R866 EY054 C213 R228 R245 R225 R986 R931 R927 R391 C923 CN520 D804 9 06 Q801 FB800 R014 D327 R060 R069 C869 R811 EY074 R209 R230 R227 D303 C924 D328 D308 C129 R864 D317 R868 JW031 R011 R037 C858 R806 Q400 C872 R807 R1507 R235 R621 D305 JW082 R521 R525 JW087 R554 JW030 R223 C873 EY065 G Q315 Q961 R863 R560 L800 EY097 R808 EY115 JW219 JW216 R369 EY067 EY095 JW187 JR020 Y EY066 JW084 C344 R802 EY083 EY073 EY072 EY082 EY071 R527 JW112 R813 JW110 EY078 C853 JW175 JW176 C343 R114 E F EY077 JW218 R363 JR100 EY080 EY075 C323 L922 C350 R556 R814 EY076 R337 C349 C369 C354 R889 JW173 R336 C353 C355 R126 R887 JW172 JW083 C329 R360 JW029 C204 JW177 Q319 C357 JW116 EY079 Q320 C316 L921 R111 EY099 R334 R335 C360 L8 0 1 EY098 R328 R528 R121 C815 R120 JW184 JW075 JW223 JW143 JW142 R803 C803 T800 EY096 Q302 R339 C339 R350 JR212 JW 178 D302 JW119 D1501 R246 JW074 C312 R305 JR010 JW073 Q306 R303 R368 C124 C804 E R109 R130 C126 R801 EY094 R370 R122 IC101 C105 C119 C118 R133 EY093 JW067 C303 R340 C100 R103 CT139 L305 Q309 R241 R216 R218 JW072 R306 CT345 D330 CT131 JW148 JW139 JW140 D L302 R314 C317 R393 R135 Q307 R249 C220 JW071 R308 R319 R311 R398 C340 R304 Q1501 C1502 R243 R215 C222 R302 R323 Q311 C331 R352 L100 C112 L102 C111 Q202 R231 R248 L304 R321 JR301 JW135 R355 R310 R322 R399 R385 R386 R396 R353 JW150 R101 CF345 C110 R134 JR300 Q321 JW136 Q101 R128 Q100 JW132 R342 JW141 R104 C113 R412 FB100 CF355 R324 C104 R408 C408 R422 R443 E2 R346 R343 C341 R423 Q201 C103 CN101 R376 C334 JR204 JW155 C409 JR400 JW157 C Q312 Q313 Q308 CF360 JW131 IC403 R229 JW070 Q317 C406 C336 Q403 Q404 JW158 CF365 L1501 CLP002 Q1502 R208 Q310 R317 R404 JW161 R332 R344 R402 R410 R416 R424 JW130 JW207 JW160 C403 B C425 JW169 IC400 JW120 IC402 JR209 Q203 JW159 R447 JW202 Q405 R220 JR006 C231 R418 JW163 R1502 C414 JW224 R234 R425 R448 C411 R206 R200 C1501 R219 C230 R420 IC401 R217 JR016 JR207 JR202 L400 R421 C200 JW225 JW069 R427 R429 Q407 Q406 R202 D407 R430 JW167 R201 JR213 JR206 R438 JW203 A R428 R436 JW166 – 37 – Q001 Q002 Q003 Q004 Q005 Q100 Q101 Q102 Q103 Q104 Q105 Q106 Q201 Q202 Q203 Q204 Q205 Q208 Q300 Q301 Q302 Q303 Q304 Q305 Q306 Q307 Q308 Q309 Q310 Q311 Q312 Q313 Q314 Q315 Q316 Q317 Q318 Q319 Q320 Q321 Q400 F-12 F-13 C-11 C-12 E-10 D-1 C-3 D-4 E-4 E-4 E-12 D-2 C-3 A-9 B-9 B-10 B-11 C-9 B-7 B-7 C-6 C-7 B-7 B-7 B-6 C-5 B-5 B-6 B-5 C-5 B-6 B-5 C-7 C-8 C-11 B-4 D-4 D-6 C-7 B-5 B-10 Q401 Q402 Q403 Q404 Q405 Q406 Q407 Q500 Q520 Q800 Q802 Q850 Q851 Q922 Q923 Q924 Q956 Q961 Q962 Q964 Q966 C-1 C-2 B-2 C-2 B-1 A-3 A-3 I-6 E-8 D-2 E-3 F-6 F-7 C-8 E-7 C-9 D-9 E-7 E-8 E-9 D-9 DIODE D001 D002 D003 D004 D005 D006 D007 D008 D009 D010 D100 D101 D102 D103 D104 D200 D201 D202 D203 D300 D301 D302 D303 D304 D305 D306 D307 D308 D309 D310 D312 D314 D315 D316 D317 D318 D319 D320 D321 D322 D323 D324 D325 I-13 C-10 H-13 C-12 I-13 E-12 D-9 E-11 I-13 E-10 E-4 C-10 C-10 E-7 D-1 B-11 F-12 B-10 B-10 B-10 B-5 C-8 D-8 C-10 C-7 D-9 D-9 D-7 D-6 E-6 E-5 E-6 D-5 D-9 F-5 C-10 D-7 C-7 D-7 D-5 C-7 D-4 D-5 D326 D327 D328 D400 D401 D402 D403 D404 D405 D406 D407 D408 D409 D410 D500 D501 D502 D503 D504 D520 D521 D522 D552 D553 D600 D602 D603 D604 D605 D606 D607 D608 D609 D800 D802 D803 D804 D805 D851 D853 D854 D961 D963 D964 D965 C-8 C-10 D-7 C-10 B-9 B-2 C-2 B-1 B-1 B-1 A-3 A-3 B-2 B-9 H-6 H-5 J-4 I-3 I-4 E-7 D-8 J-5 J-5 I-6 I-8 H-9 I-9 I-8 I-8 H-8 G-8 G-7 F-9 E-2 F-4 F-4 F-2 E-3 F-1 G-6 H-6 E-7 E-8 E-8 D-8 KV-HA21M80 RM-969 PRINTED WIRING BOARDS CV [RGB AMPLIFER] – CV Board – JW704 R720 C714 R740 R762 R714 JW707 J7 01 C1778 R727 R713 R728 R755 Q1777 R715 C1779 R707 R729 R732 R756 R719 R731 R712 R761 R738 C712 R739 C1770 R717 C702 Q1765 R1779 C1769 R1785 EY701 EY708 C1763 R1765 R708 CN702 R705 C701 C1761 CN706 CN1701 L1761 C703 L701 R1764 R1769 C704 RV702 R703 C719 EY1714 C1775 CN707 JW702 CLP703 JW713 R734 C1768 C716 R710 JW708 EY1713 EY705 JW701 C1764 JW712 L710 R1776 JW715 JW711 C717 R718 CN709 EY702 R724 C746 D703 Q709 D1768 R1782 CN703 D716 R723 C737 EY709 D717 EY706 R711 R706 R760 D701 C718 D1767 R1772 C1773 R733 D713 C706 CN708 EY703 R730 D714 L712 JW710 R1812 Q707 Q1763 Q704 D707 JW714 EY1712 D715 D709 Q706 C710 R725 EY711 EY712 C708 EY1711 R757 JW709 D702 L1700 CLP701 L711 C736 EY707 R722 Q712 R726 Q708 C1784 R1775 EY704 EY710 JW703 R1774 C709 Q710 D708 Q705 C1762 R721 JW705 R1790 R716 R1851 C1760 C713 JW706 CN1702 Q1767 Q711 R1763 P702 CLP704 CN701 CN704 – 38 – KV-HA21M80 RM-969 5-7. SEMICONDUCTORS DIODE CATHODE CATHODE CATHODE ANODE ANODE CATHODE CATHODE ANODE ANODE ANODE D1NL20U D3S6M-F RU4AM-T3 S3L20UF4 MA113-TX UDZSTE-175.1B UDZSTE-179.1B UDZSTE-175.6B 1SS355TE-17 EGOICVI ISS119-25 RD2.2ES-B2 RD15ES-B1 RD5.6ESB2 RN4Z MA8024 ISS356-TW11 EGP20G ELIZ GP08D NNCD8.2A-TI NNCD9.1A-TI TRANSISTOR LED LETTER SIDE CATHODE 3 2 1 3 ANODE (GRN) 2 DA204K BY228 ANODE (GRN) CATHODE 1 ANODE D3SB60F3 SPB-25MVWF E C B E 2SC3209LK C B 2SC2611 C B E DTC144EKA MSD601-RT1 MSB709-RT1 UN2211 UN2213 UN2216 E 2SA1162-G C B 2SA1091-0 G D 1 B E C S IRF614-005 2SC3779C LETTER SIDE 4 3 1 E C B 2SC2785-HFE 2 2 3 2SK208GR-TE85L SBX3081 AN5522 – 39 – 3 4 1 5 7 2 6 PC123F2 3 2SD2624-CA IC 1 2 SE135N KV-HA21M80 RM-969 MARKING SIDE VIEW DIP SOP 1 1 TOP VIEW Small Outline L-Leaded Pin 8~98 34 PQO9RD11 Dual In-line Package Pin 6~98 M24C08-BN6 (A)(8 PIN) CXP85224A-080S (64 PIN) NJM4556AD (8 PIN) TDA7438D013TR (28 PIN) STR-F6706A TDA8844 MM1319AFBE (7 PIN) NJM2903M (8 PIN) 12 1 Zig-zag In -line Package Pin 6~99 TOP VIEW ANODE CATHODE UPC574J – 40 – KV-HA21M80 RM-969 SECTION 6 EXPLODED VIEWS NOTE: • Items with no part number and no • description are not stocked because they are seldom required for routine service. • The construction parts of an assembled par t are indicated with a collation number in the remark column. Items marked " ∗ " are not stocked since they are seldom required for routine ser vice. Some delay should be anticipated when ordering these items. The components identified by shading and mark ! are critical for safety. Replace only with part number specified. 6-1. PICTURE TUBE AND CHASSIS SCREW +BVTP 3 × 8 SCREW +BVTP 4 × 16 r : 7-685-646-79 p : 7-685-663-71 Caution : Do not take out CRT Support block while TV set in standing position. 6 5 14 29 7 18 28 11 16 27 12 9 15 17 10 8 8 13 29 22 28 12 4 24 27 21 23 20 17 25 1 26 3 REF. NO. 19 2 PART NO. DESCRIPTION REMARK 1 2 3 4 5 X-4039-609-1 4-083-943-01 X-4039-851-1 ! 8-738-809-05 1-452-032-00 BEZNET ASSY 2, 25, 26 BUTTON POWER DOOR ASSY, CONTROL PICTURE TUBE (A51LPT70X) MAGNET, DISC 6 7 8 9 10 X-4039-650-2 * 3-704-372-11 4-046-600-11 4-057-714-01 ! 8-451-505-11 COVER ASSY, REAR (■ 10 SCREWS) HOLDER HV CABLE SPACER DY PIECE TLH CONVERGENCE DEFLECTION YOKE (Y21RSA-S) 11 12 13 14 15 CV BOARD MOUNTED (NOT STOCKED) 4-057-862-01 SCREW TAPPING 5 + CROWN WASHER 4-078-765-01 SPRING EXTENSION ! 1-416-479-41 COIL DEGAUSSING * 4-069-652-02 CUSHION (HS BAND) REF. NO. – 41 – PART NO. DESCRIPTION REMARK 16 17 18 19 20 4-064-883-03 HOLDER DGC 1-825-039-11 SPEAKER (15 X 6.5 CM) 4-051-736-42 PIECE A (90) CONV CORRECT A BOARD COMPLETE (NOT STOCKED) ! 1-453-329-21 TRANSFORMER ASSY FLY BACK (NX-4751//M3A4) 21 22 23 24 25 8-598-591-10 4-022-115-00 * 4-083-951-01 ! 1-823-479-11 * 4-083-944-01 26 27 28 29 4-036-405-11 * 4-046-981-03 4-302-404-03 4-374-745-21 TUNER, VSS BT-AG402 HOLDER AC CORD BRACKET TERMINAL CORD AC POWER (WITH CONNECTOR) BAR OPTICAL SPRING COMPRESSION BRACKET SPEAKER SCREW (WASHER HEAD) (+P 4X16) CUSHION (A) KV-HA21M80 RM-969 SECTION 7 ELECTRICAL PARTS LIST A REF NO. PART NO. NOTE: DESCRIPTION The components identified by shading and mark ! are critical for safety. Replace only with part number specified. When indicating par ts by reference number, please include the board name. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK • All resistors are in ohms • Items marked " ∗ " are not stocked since • F : nonflammable they are seldom required for routine service. Some delay should be anticiCAPACITORS pated when ordering these items. • MF : µF, PF : µµF • All variable and adjustable resistors have COILS characteristic curve B, unless otherwise • MMH : mH, UH : µH noted. REMARK A BOARD COMPLETE (NOT STOCKED) ******************** 1-533-223-11 * 4-055-304-01 4-082-405-01 4-382-854-01 4-382-854-11 7-685-648-79 FUSE HOLDER HOLDER, LED HOLDER, FBT SCREW (M3X8), P, SW (+) SCREW (M3X10), P, SW (+) SCREW +BVTP The components identified by shading and mark ! are critical for safety. Replace only with part number specified. 3X12 TYPE2 IT-3 <CAPACITOR> C001 C002 C004 C005 C006 1-163-005-51 1-163-005-51 1-163-009-11 1-163-009-11 1-163-009-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 470PF 470PF 0.001UF 0.001UF 0.001UF 10% 10% 10.00% 10.00% 10.00% 50V 50V 50V 50V 50V C007 C009 C010 C011 C012 1-163-009-11 1-163-009-11 1-163-251-11 1-163-251-11 1-163-009-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.001UF 0.001UF 100PF 100PF 0.001UF 10.00% 10.00% 5.00% 5.00% 10.00% 50V 50V 50V 50V 50V C013 C014 C015 C016 C017 1-163-009-11 1-163-009-11 1-163-009-11 1-163-251-11 1-126-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT 0.001UF 0.001UF 0.001UF 100PF 47UF 10.00% 10.00% 10.00% 5.00% 20.00% 50V 50V 50V 50V 16V C018 C019 C020 C021 C022 1-126-961-11 8-719-069-55 1-163-005-51 1-163-009-11 1-163-251-11 ELECT 2.2UF DIODE UDZSTE-175.6B CERAMIC CHIP 470PF CERAMIC CHIP 0.001UF CERAMIC CHIP 100PF 20.00% 50V C023 C024 C025 C026 C027 1-163-251-11 1-163-009-11 1-164-505-51 1-163-009-11 1-163-009-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 100PF 0.001UF 2.2UF 0.001UF 0.001UF 5.00% 10.00% 10% 10.00% 10.00% 50V 50V 16V 50V 50V C028 C029 C030 C031 C032 1-163-251-11 1-163-251-11 1-163-251-11 1-163-251-11 1-163-011-91 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 100PF 100PF 100PF 100PF 1500PF 5.00% 5.00% 5.00% 5.00% 10% 50V 50V 50V 50V 50V C033 C034 C035 C036 C037 1-163-251-11 1-163-009-11 1-163-009-11 1-163-038-00 1-163-251-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 100PF 0.001UF 0.001UF 0.1UF 100PF 5.00% 50V 10.00% 50V 10.00% 50V 25V 5.00% 50V C038 C039 C041 C042 C043 1-163-251-11 1-163-038-00 1-163-245-11 1-163-251-11 1-163-251-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 100PF 0.1UF 56PF 100PF 100PF 5.00% 10% 50V 10.00% 50V 5.00% 50V 5.00% 5.00% 5.00% 50V 25V 50V 50V 50V REF NO. PART NO. DESCRIPTION REMARK C044 C045 C046 C047 C048 1-163-245-11 1-126-962-11 1-163-033-51 1-164-005-51 1-126-965-91 CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP ELECT 56PF 3.3UF 0.022UF 470000PF 22UF C049 C050 C051 C052 C053 1-163-038-00 1-163-009-11 1-163-038-00 1-126-935-11 1-126-935-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT 0.1UF 25V 0.001UF 10.00% 50V 0.1UF 25V 470UF 20.00% 10V 470UF 20.00% 10V C054 C055 C056 C057 C058 1-104-666-11 1-163-001-51 1-163-251-11 1-163-001-51 1-163-001-51 ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 220UF 220PF 100PF 220PF 220PF 20.00% 10% 5.00% 10% 10% 25V 50V 50V 50V 50V C061 C063 C100 C101 C102 1-164-161-11 1-163-243-11 1-163-009-11 1-126-964-11 1-163-038-00 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP 0.0022UF 47PF 0.001UF 10UF 0.1UF 10.00% 5.00% 10.00% 20.00% 50V 50V 50V 50V 25V C103 C104 C105 C106 C107 1-163-038-00 1-163-038-00 1-163-038-00 1-163-017-00 1-126-935-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT 0.1UF 25V 0.1UF 25V 0.1UF 25V 0.0047UF 10.00% 50V 470UF 20.00% 16V C108 C109 C111 C115 C116 1-126-767-11 1-163-017-00 1-164-232-11 1-163-017-00 1-163-017-00 ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 1000UF 0.0047UF 0.01UF 0.0047UF 0.0047UF 20.00% 10.00% 10.00% 10.00% 10.00% C117 C121 C122 C124 C125 1-163-245-11 1-163-251-11 1-163-227-51 1-130-493-00 1-130-495-00 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP MYLAR MYLAR 56PF 100PF 10PF 0.068UF 0.1UF 5.00% 50V 5.00% 50V 0.50PF 50V 5.00% 50V 5.00% 50V C126 C127 C128 C129 C131 1-130-493-00 1-163-251-11 1-126-965-91 1-164-232-11 1-164-161-11 MYLAR CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP 0.068UF 100PF 22UF 0.01UF 0.0022UF 5.00% 5.00% 20.00% 10.00% 10.00% 50V 50V 50V 50V 50V C200 C201 C202 C203 C204 1-163-037-11 1-163-037-11 1-130-471-00 1-126-961-11 1-130-471-00 CERAMIC CHIP CERAMIC CHIP MYLAR ELECT MYLAR 0.022UF 0.022UF 0.001UF 2.2UF 0.001UF 10.00% 10.00% 5.00% 20.00% 5.00% 50V 50V 50V 50V 50V C205 C206 C207 C208 C209 1-126-961-11 1-126-968-11 1-126-942-61 1-128-551-11 1-126-942-61 ELECT ELECT ELECT ELECT ELECT 2.2UF 100UF 1000UF 22UF 1000UF 20.00% 20.00% 20.00% 20.00% 20.00% 50V 50V 25V 25V 25V – 42 – 5.00% 50V 20.00% 50V 50V 10% 25V 20.00% 50V 16V 50V 50V 50V 50V KV-HA21M80 RM-969 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. A REF NO. PART NO. DESCRIPTION REMARK C210 C211 C213 C214 C215 1-128-551-11 1-126-959-11 1-164-232-11 1-107-725-11 1-107-725-11 ELECT ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 22UF 0.47UF 0.01UF 0.1UF 0.1UF 20.00% 20.00% 10.00% 10.00% 10.00% 25V 50V 50V 16V 16V C345 C346 C347 C348 C349 1-164-182-11 1-163-038-00 1-126-933-11 1-163-038-00 1-164-346-51 CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP 3300PF 0.1UF 100UF 0.1UF 1UF 50V 25V 20.00% 16V 25V 10% 16V C216 C217 C218 C219 C220 1-107-725-11 1-163-037-11 1-107-725-11 1-163-024-00 1-163-037-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1UF 0.022UF 0.1UF 0.018UF 0.022UF 10.00% 10.00% 10.00% 10.00% 10.00% 16V 50V 16V 50V 50V C352 C353 C354 C355 C356 1-164-161-11 1-107-823-51 1-163-017-00 1-107-823-51 1-164-232-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0022UF 470000PF 0.0047UF 470000PF 0.01UF 10.00% 10% 10.00% 10% 10.00% C221 C222 C223 C224 C225 1-163-017-00 1-163-024-00 1-163-017-00 1-126-960-11 1-126-960-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT 0.0047UF 0.018UF 0.0047UF 1UF 1UF 10.00% 10.00% 10.00% 20.00% 20.00% 50V 50V 50V 50V 50V C357 C358 C359 C360 C361 1-163-009-11 1-163-251-11 1-163-038-00 1-136-165-00 1-164-505-51 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP FILM CERAMIC CHIP 0.001UF 100PF 0.1UF 0.1UF 2.2UF 10.00% 50V 5.00% 50V 25V 5.00% 50V 10% 16V C226 C227 C228 C229 C230 1-126-963-11 1-126-947-11 1-126-960-11 1-126-959-11 1-164-505-51 ELECT ELECT ELECT ELECT CERAMIC CHIP 4.7UF 47UF 1UF 0.47UF 2.2UF 20.00% 20.00% 20.00% 20.00% 10% 50V 16V 50V 50V 16V C362 C363 C364 C366 C369 1-164-005-51 1-163-017-00 1-126-964-11 1-126-933-11 1-137-194-81 CERAMIC CHIP CERAMIC CHIP ELECT ELECT FILM 470000PF 0.0047UF 10UF 100UF 0.47UF 10% 10.00% 20.00% 20.00% 5.00% 25V 50V 50V 16V 50V C231 C232 C234 C236 C237 1-164-505-51 1-164-505-51 1-107-823-51 1-130-491-00 1-126-951-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP MYLAR ELECT 2.2UF 2.2UF 470000PF 0.047UF 470UF 10% 10% 10% 5.00% 20.00% 16V 16V 16V 50V 35V C370 C371 C400 C403 C404 1-216-295-61 1-126-964-11 1-126-934-11 1-164-346-51 1-126-960-11 SHORT CHIP ELECT ELECT CERAMIC CHIP ELECT 0 10UF 220UF 1UF 1UF 20.00% 20.00% 10% 20.00% 50V 16V 16V 50V C240 C241 C242 C243 C300 1-164-505-51 1-163-017-00 1-163-017-00 1-126-952-11 1-163-243-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP 2.2UF 0.0047UF 0.0047UF 1000UF 47PF 10% 10.00% 10.00% 20.00% 5.00% 16V 50V 50V 35V 50V C405 C406 C407 C408 C409 1-126-960-11 1-164-346-51 1-126-934-11 1-163-038-00 1-163-038-00 ELECT CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP 1UF 1UF 220UF 0.1UF 0.1UF 20.00% 50V 10% 16V 20.00% 16V 25V 25V C301 C302 C303 C304 C305 1-163-237-51 1-163-243-11 1-163-113-00 1-163-255-51 1-126-933-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT 27PF 47PF 68PF 150PF 100UF 10% 5.00% 10% 10% 20.00% 50V 50V 50V 50V 16V C410 C411 C412 C414 C418 1-126-933-11 1-163-038-00 1-128-551-11 1-163-038-00 1-126-933-11 ELECT CERAMIC CHIP ELECT CERAMIC CHIP ELECT 100UF 0.1UF 22UF 0.1UF 100UF 20.00% 16V 25V 20.00% 25V 25V 20.00% 16V C306 C308 C309 C310 C311 1-163-017-00 1-163-131-00 1-163-263-51 1-163-131-00 1-163-005-51 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0047UF 390PF 330PF 390PF 470PF 10.00% 10% 10% 10% 10% 50V 50V 50V 50V 50V C425 C426 C435 C500 C501 1-163-113-00 1-163-113-00 1-126-934-11 1-126-933-11 1-104-666-11 CERAMIC CHIP CERAMIC CHIP ELECT ELECT ELECT 68PF 68PF 220UF 100UF 220UF 10% 10% 20.00% 20.00% 20.00% C312 C315 C316 C317 C318 1-163-229-51 1-126-961-11 1-163-243-11 1-216-295-61 1-163-038-00 CERAMIC CHIP ELECT CERAMIC CHIP SHORT CHIP CERAMIC CHIP 12PF 2.2UF 47PF 0 0.1UF 10% 50V 20.00% 50V 5.00% 50V 25V C502 C503 C504 C505 C507 1-104-666-11 1-162-318-11 1-162-318-11 1-123-024-21 1-102-228-00 ELECT CERAMIC CERAMIC ELECT CERAMIC 220UF 0.001UF 0.001UF 33UF 470PF 20.00% 25V 10.00% 500V 10.00% 500V <160V 10.00% 500V C319 C320 C321 C323 C327 1-163-038-00 1-163-038-00 1-126-963-11 1-163-251-11 1-163-038-00 CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP 0.1UF 0.1UF 4.7UF 100PF 0.1UF 25V 25V 20.00% 50V 5.00% 50V 25V C508 C509 C510 C552 C554 1-107-654-11 1-106-379-12 1-137-150-11 1-137-194-81 1-163-035-51 ELECT MYLAR MYLAR FILM CERAMIC CHIP 33UF 0.033UF 0.01UF 0.47UF 0.047UF 20.00% 10.00% 10.00% 5.00% C328 C329 C330 C332 C335 1-164-222-91 1-163-038-00 1-163-038-00 1-126-933-11 1-126-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT 0.22UF 0.1UF 0.1UF 100UF 47UF 25V 25V 25V 20.00% 16V 20.00% 16V C555 C556 C557 C558 C559 1-126-949-11 1-163-038-00 1-126-948-11 1-163-009-11 1-106-220-00 ELECT CERAMIC CHIP ELECT CERAMIC CHIP MYLAR 220UF 0.1UF 100UF 0.001UF 0.1UF 20.00% 35V 25V 20.00% 35V 10.00% 50V 10.00% 100V C337 C339 C342 C343 C344 1-163-038-00 1-163-038-00 1-163-038-00 1-163-231-51 1-163-231-51 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1UF 0.1UF 0.1UF 15PF 15PF 25V 25V 25V 50V 50V C561 C562 C600 C601 C602 1-163-017-00 1-106-220-00 1-161-830-00 ! 1-115-165-11 1-117-752-11 C603 1-117-623-11 10% 10% REF NO. PART NO. – 43 – DESCRIPTION REMARK 10% 50V 16V 50V 16V 50V 50V 50V 16V 16V 25V 250V 200V 100V 50V 50V CERAMIC CHIP 0.0047UF MYLAR 0.1UF CERAMIC 0.0047UF FILM 0.1UF ELECT(BLOCK) 330UF 10.00% 10.00% 99% 20.00% 20.00% 50V 100V 500V 275V 450V FILM 3.00% 1.2KV 1500PF KV-HA21M80 RM-969 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. A REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. C604 C605 C606 C607 1-161-830-00 1-161-830-00 1-104-666-11 1-161-830-00 CERAMIC CERAMIC ELECT CERAMIC 0.0047UF 0.0047UF 220UF 0.0047UF 99% 99% 20.00% 99% 500V 500V 25V 500V C608 C609 C610 C611 C612 1-161-830-00 1-163-005-51 1-165-740-31 1-163-145-00 ! 1-119-886-51 CERAMIC CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC 0.0047UF 470PF 150UF 0.0015UF 470PF 99% 10% 20% 5.00% 10.00% 500V 50V 35V 50V 250V C613 C614 C615 C617 C618 1-102-228-00 1-123-024-21 1-102-228-00 1-126-942-61 1-126-933-11 CERAMIC ELECT CERAMIC ELECT ELECT 470PF 33UF 470PF 1000UF 100UF 10.00% 500V <160V 10.00% 500V 20.00% 25V 20.00% 16V C619 C620 C621 C625 C626 ! 1-119-886-51 1-162-134-11 ! 1-117-703-51 8-719-083-70 1-106-383-00 C627 C628 C800 C801 C802 CN003 CN200 CN300 CN500 CN600 1-126-953-11 1-163-005-51 1-126-960-11 1-163-009-11 1-106-375-12 ELECT CERAMIC CHIP ELECT CERAMIC CHIP MYLAR 2200UF 470PF 1UF 0.001UF 0.022UF 20.00% 10% 20.00% 10.00% 99% 35V 50V 50V 50V 200V C803 C804 C807 C808 C809 1-102-244-00 1-162-318-11 1-162-115-00 1-106-365-00 1-107-364-11 CERAMIC CERAMIC CERAMIC MYLAR MYLAR 220PF 0.001UF 330PF 0.0082UF 0.01UF 10.00% 10.00% 10.00% 10.00% 10.00% 500V 500V 2KV 200V 200V C810 C811 C812 C813 C814 1-106-375-12 1-107-957-11 1-117-665-11 1-162-115-00 1-117-646-11 MYLAR ELECT FILM CERAMIC FILM 0.022UF 1UF 0.33UF 330PF 12000PF 99% 20.00% 5.00% 10.00% 3.00% 200V 250V 250V 2KV 1.2KV C852 C856 C857 C858 C859 1-107-846-11 1-163-009-11 1-126-964-11 1-163-031-11 1-163-031-11 FILM CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP 0.1UF 5.00% 0.001UF 10.00% 10UF 20.00% 0.01UF 0.01UF 250V 50V 50V 50V 50V C860 C861 C863 C865 C866 1-208-834-11 1-130-202-00 1-216-295-61 1-126-933-11 1-163-031-11 METAL CHIP FILM SHORT CHIP ELECT CERAMIC CHIP 150K 0.5% 0.022UF 5.00% 0 100UF 20.00% 0.01UF 1/10W 400V C867 C868 C869 C870 C872 1-164-161-11 1-163-033-51 1-115-339-51 1-163-001-51 1-163-038-00 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0022UF 10.00% 50V 0.022UF 50V 0.1UF 10.00% 50V 220PF 10% 50V 0.1UF 25V C873 C874 C875 1-163-031-11 1-163-031-11 1-163-038-00 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01UF 0.01UF 0.1UF 1-234-684-21 1-234-686-21 1-234-689-21 1-234-691-21 FILTER, BAND PASS (F4.5C) FILTER, BAND PASS (F5.5C) FILTER, BAND PASS (F6.0C) FILTER, BAND PASS (F6.5C) * * * * * 1-508-797-00 1-564-507-11 1-564-509-11 1-564-508-11 1-508-786-00 CN601 * 1-691-134-11 CN602 * 1-580-843-11 10.00% 250V 10.00% 2KV 99% 250V CF345 CF355 CF360 CF365 REMARK <CONNECTOR> CERAMIC 470PF CERAMIC 470PF CERAMIC 0.0047UF DIODE UDZSTE-1727B MYLAR 0.047UF <FILTER> DESCRIPTION PIN, CONNECTOR 4P PLUG, CONNECTOR 4P PLUG, CONNECTOR 6P PLUG, CONNECTOR 5P PIN, CONNECTOR (5MM PITCH) 2P PIN, CONNECTOR (PC BOARD) 2P PIN, CONNECTOR (POWER) <TRIMMER> CT131 CT139 CT345 CT355 CT360 1-767-774-22 1-767-775-22 1-795-342-11 1-795-343-21 1-795-344-11 TRAP, CERAMIC TRAP, CERAMIC TRAP, CERAMIC (T4.5C) TRAP, CERAMIC (T55B) TRAP, CERAMIC (T60B) CT365 1-795-345-11 TRAP, CERAMIC (T65B) 10.00% 200V 16V 50V 50V 50V 25V <DIODE> D001 D004 D005 D006 D007 8-719-083-18 8-719-911-19 1-162-318-11 8-719-109-89 8-719-069-54 DIODE SPB-25MVWF 1SS119-25 CERAMIC 0.001UF 10.00% 500V RD5.6ESB2 UDZSTE-175.1B D009 D100 D103 D104 D200 8-719-069-54 8-719-044-76 8-759-157-40 8-719-914-42 8-719-914-42 UDZSTE-175.1B 1SS356-TW11 UPC574J DA204K DA204K D202 D203 D301 D304 D305 8-719-988-61 8-719-988-61 8-719-041-97 8-719-017-70 8-719-988-61 1SS355TE-17 1SS355TE-17 MA113-(TX) MA8024 1SS355TE-17 D306 D307 D308 D309 D310 8-719-109-54 8-719-988-61 8-719-988-61 8-719-069-60 8-719-911-19 RD2.2ES-B2 1SS355TE-17 1SS355TE-17 UDZSTE-179.1B 1SS119-25 D311 D312 D314 D315 D318 8-719-070-15 8-719-069-60 8-719-908-03 8-719-988-61 8-719-988-61 NNCD8.2A-T1 UDZSTE-179.1B GP08D 1SS355TE-17 1SS355TE-17 D319 D320 D321 D322 D323 8-719-988-61 8-719-988-61 8-719-988-61 8-719-069-60 8-719-069-60 1SS355TE-17 1SS355TE-17 1SS355TE-17 UDZSTE-179.1B UDZSTE-179.1B D324 D325 D327 D331 D332 8-719-069-60 8-719-069-60 8-719-988-61 8-719-069-60 8-719-069-60 UDZSTE-179.1B UDZSTE-179.1B 1SS355TE-17 UDZSTE-179.1B UDZSTE-179.1B D333 D400 D401 D402 D403 8-719-069-60 8-719-988-61 8-719-988-61 8-719-070-16 8-719-069-60 UDZSTE-179.1B 1SS355TE-17 1SS355TE-17 NNCD9.1A-T1 UDZSTE-179.1B – 44 – KV-HA21M80 RM-969 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. A REF NO. PART NO. DESCRIPTION REMARK D404 D405 D406 D407 D500 8-719-069-60 8-719-070-16 8-719-069-60 8-719-069-60 8-719-911-19 UDZSTE-179.1B NNCD9.1A-T1 UDZSTE-179.1B UDZSTE-179.1B 1SS119-25 D501 D502 D503 D504 D552 8-719-911-19 8-719-302-43 8-719-302-43 8-719-302-43 8-719-908-03 1SS119-25 EL1Z EL1Z EL1Z GP08D D553 D600 D601 D602 D603 8-719-109-89 8-719-030-33 8-719-077-77 8-719-510-73 8-719-110-41 RD5.6ESB2 DIODE EG01CV1 D3SB60F3 S3L20UF4 RD15ES-B2 D604 D605 D606 D607 D608 8-719-063-70 8-719-063-70 8-719-063-70 8-719-027-22 8-719-312-10 D1NL20U D1NL20U D1NL20U D3S6M-F RU4AM-T3 D609 D800 D802 D803 D804 8-719-067-18 8-719-911-19 8-719-908-03 8-719-908-03 8-719-081-00 RN4Z 1SS119-25 GP08D GP08D DIODE BY228/A52A/ D805 D851 D853 D854 8-719-069-60 8-719-979-85 8-719-988-61 8-719-083-63 UDZSTE-179.1B EGP20G 1SS355TE-17 DIODE UDZSTE-1713B * 1-580-798-11 J200 J400 J401 ! 1-576-016-11 1-770-786-11 1-779-850-11 1-770-329-13 JACK JACK BLOCK, PIN 6P JACK, PIN 3P 3.15A JR001 JR003 JR006 JR013 JR014 1-216-295-61 1-216-295-61 1-216-295-61 1-216-295-61 1-216-295-61 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 JR015 JR016 JR018 JR020 JR034 1-216-295-61 1-216-295-61 1-216-295-61 1-216-295-61 1-216-295-61 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 JR035 JR036 JR205 JR210 JR212 1-216-295-61 1-216-295-61 1-216-295-61 1-216-295-61 1-216-295-61 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 JR214 JR301 JR304 JR400 1-216-295-61 1-216-295-61 1-216-295-61 1-216-295-61 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 <COIL> CONNECTOR PIN (DY) 6P FUSE REMARK <CHIP CONDUCTOR> <FUSE> F600 DESCRIPTION <JACK> <CONNECTOR> DY1 REF NO. PART NO. 250V 3.1 L001 L002 L100 L101 L102 1-414-855-31 1-414-184-41 1-414-856-11 1-410-498-11 1-410-985-42 INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 1UH 15UH 10UH 1.2UH 0.22UH L103 L200 L300 L301 L302 1-410-987-42 1-249-401-11 1-410-512-11 1-410-510-11 1-410-508-11 INDUCTOR CARBON INDUCTOR INDUCTOR INDUCTOR 0.33UH 47 18UH 12UH 8.2UH L303 L304 L305 L306 L307 1-410-508-11 1-410-510-11 1-410-510-11 1-410-500-11 1-410-501-11 INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 8.2UH 12UH 12UH 1.8UH 2.2UH L308 L309 L310 L400 L500 1-410-501-11 1-410-502-11 1-408-608-31 1-414-187-11 1-408-947-00 INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 2.2UH 2.7UH 27UH 47UH 2.2MH L600 L601 L800 L802 L803 1-412-533-21 1-414-487-41 1-406-677-11 1-424-796-11 1-414-493-41 INDUCTOR 47UH INDUCTOR 1UH INDUCTOR 10MH COIL, HORIZONTAL LINEARITY INDUCTOR 4.7MH 5% <FERRITE BEAD> FB001 FB100 FB603 FB604 FB800 1-410-397-21 1-410-396-71 1-412-911-31 1-410-397-21 1-410-397-21 FERRITE FERRITE FERRITE FERRITE FERRITE 1.1UH 0.45UH 0UH 1.1UH 1.1UH <IC> IC001 IC002 IC003 IC004 IC201 8-752-925-65 8-759-371-21 8-759-672-78 8-742-225-20 8-759-476-86 IC CXP85224A-080S MM1319AFBE M24C08-BN6(A) IC SBX3081-21 TDA7438D013TR IC203 IC301 IC402 IC551 IC601 6-700-034-01 6-700-146-01 8-759-649-89 8-759-835-98 8-749-019-42 IC AN5276 IC TDA8844/N2 IC MC4558CD IC AN5522 IC STR-F6707A IC602 IC604 IC850 IC851 8-749-920-61 8-759-459-99 8-759-700-07 8-759-649-89 SE-135N PQ09RD11 NJM2903M IC MC4558CD <PHOTO COUPLER> PH600 ! 8-749-010-64 – 45 – PC123F2 1/4W KV-HA21M80 RM-969 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. A REF NO. PART NO. DESCRIPTION REMARK <IC LINK> PS600 PS601 1-533-597-41 1-533-597-41 IC LINK IC LINK 5A 5A 90V 90V <TRANSISTOR> Q001 Q002 Q003 Q004 Q005 8-729-421-19 8-729-421-19 8-729-010-25 8-729-010-25 8-729-421-19 UN2213 UN2213 MSD601-RT1 MSD601-RT1 UN2213 Q100 Q102 Q103 Q104 Q105 8-729-010-25 8-729-022-54 8-729-424-67 8-729-424-67 8-729-010-25 MSD601-RT1 TRANSISTOR 2SC3779C,D-AA UN2216 UN2216 MSD601-RT1 Q106 Q201 Q202 Q203 Q204 8-729-010-25 8-729-010-25 8-729-036-56 8-729-010-25 8-729-216-22 MSD601-RT1 MSD601-RT1 2SK208-GR-TE85L MSD601-RT1 2SA1162-G Q205 Q208 Q300 Q301 Q302 8-729-421-22 1-801-806-11 8-729-010-05 8-729-010-05 8-729-010-05 UN2211 TR DTC144EKA MSB709-RT1 MSB709-RT1 MSB709-RT1 Q303 Q304 Q305 Q306 Q307 8-729-010-25 8-729-010-05 8-729-010-05 8-729-010-25 8-729-010-25 MSD601-RT1 MSB709-RT1 MSB709-RT1 MSD601-RT1 MSD601-RT1 Q308 Q309 Q310 Q311 Q312 8-729-424-67 8-729-010-25 8-729-424-67 8-729-010-25 8-729-424-67 UN2216 MSD601-RT1 UN2216 MSD601-RT1 UN2216 Q313 Q314 Q315 Q318 Q320 8-729-424-67 8-729-421-22 8-729-010-25 8-729-010-25 8-729-421-22 UN2216 UN2211 MSD601-RT1 MSD601-RT1 UN2211 Q400 Q401 Q402 Q403 Q404 8-729-010-05 8-729-424-67 8-729-424-67 8-729-010-05 8-729-010-05 MSB709-RT1 UN2216 UN2216 MSB709-RT1 MSB709-RT1 Q405 Q406 Q407 Q500 Q800 8-729-010-05 8-729-010-25 8-729-010-25 8-729-200-17 8-729-140-50 MSB709-RT1 MSD601-RT1 MSD601-RT1 2SA1091-O 2SC3209LK Q801 Q802 Q850 Q851 8-729-055-74 8-729-050-48 8-729-010-25 8-729-010-05 TRANSISTOR 2SD2624-CA TRANSISTOR IRF614-005 MSD601-RT1 MSB709-RT1 REF NO. PART NO. DESCRIPTION REMARK R004 R005 1-216-059-61 1-216-043-61 RES-CHIP RES-CHIP 2.7K 560 5% 5% 1/10W 1/10W R006 R007 R008 R009 R010 1-216-043-61 1-216-065-61 1-216-065-61 1-216-037-61 1-216-037-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 560 4.7K 4.7K 330 330 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R011 R012 R013 R014 R015 1-216-295-61 1-216-049-61 1-216-021-61 1-216-057-61 1-216-025-61 SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 0 1K 68 2.2K 100 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W R016 R017 R018 R019 R020 1-216-037-61 1-216-049-61 1-216-057-61 1-216-057-61 1-216-057-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 330 1K 2.2K 2.2K 2.2K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R021 R022 R024 R025 R026 1-216-049-61 1-216-049-61 1-216-025-61 1-216-065-61 1-216-065-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1K 1K 100 4.7K 4.7K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R027 R028 R029 R031 R032 1-216-101-61 1-216-057-61 1-216-025-61 1-216-025-61 1-216-049-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 150K 2.2K 100 100 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R033 R034 R035 R036 R037 1-216-073-61 1-216-057-61 1-216-057-61 1-216-057-61 1-216-049-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 2.2K 2.2K 2.2K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R038 R039 R042 R043 R044 1-216-049-61 1-216-043-61 1-216-039-61 1-216-025-61 1-216-033-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1K 560 390 100 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R045 R046 R047 R048 R049 1-216-073-61 1-216-685-11 1-216-025-61 1-216-065-61 1-216-065-61 RES-CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP 10K 27K 100 4.7K 4.7K 5% 0.5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R050 R051 R052 R053 R054 1-208-820-11 1-216-073-61 1-216-065-61 1-216-065-61 1-216-065-61 METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 39K 10K 4.7K 4.7K 4.7K 0.5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R055 R056 R057 R058 R059 1-216-049-61 1-216-049-61 1-216-025-61 1-216-025-61 1-216-033-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1K 1K 100 100 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R060 R061 R062 R063 R064 1-216-033-61 1-216-033-61 1-216-049-61 1-216-049-61 1-216-049-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 220 220 1K 1K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R065 R066 R072 R073 R074 1-216-049-61 1-216-049-61 1-216-065-61 1-216-081-61 1-216-049-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1K 1K 4.7K 22K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W <RESISTOR> R001 R002 R003 1-216-071-61 1-216-071-61 1-216-059-61 RES-CHIP RES-CHIP RES-CHIP 8.2K 8.2K 2.7K 5% 5% 5% 1/10W 1/10W 1/10W – 46 – KV-HA21M80 RM-969 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. A REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. R077 R100 R103 R106 R107 1-216-025-61 1-216-049-61 1-216-013-61 1-216-065-61 1-216-063-61 RES-CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP 100 1K 33 4.7K 3.9K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R108 R109 R111 R112 R113 1-216-041-61 1-216-019-61 1-216-073-61 1-216-069-61 1-216-057-61 RES-CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP 470 56 10K 6.8K 2.2K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R114 R115 R117 R118 R119 1-216-057-61 1-216-065-61 1-216-081-61 1-216-041-61 1-216-081-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 2.2K 4.7K 22K 470 22K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R120 R121 R122 R123 R124 1-216-055-61 1-216-081-61 1-216-109-61 1-216-081-61 1-216-081-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1.8K 22K 330K 22K 22K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R125 R128 R129 R130 R133 1-215-925-11 1-216-025-61 1-216-009-61 1-216-049-61 1-249-389-11 METAL OXIDE RES-CHIP METAL CHIP RES-CHIP CARBON 22K 100 22 1K 4.7 5% 5% 5% 5% 5% 3W 1/10W 1/10W 1/10W 1/4W R134 R135 R200 R201 R202 1-216-295-61 1-216-295-61 1-216-061-00 1-216-053-61 1-216-089-61 SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES, CHIP 47K 0 0 3.3K 1.5K 5% 5% (2012) 1/10W 1/10W R203 R204 R206 R207 R208 1-216-041-61 1-216-061-00 1-216-075-61 1-216-075-61 1-216-073-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 470 3.3K 12K 12K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R209 R210 R211 R212 R214 1-216-073-61 1-249-409-11 1-249-409-11 1-216-049-61 1-216-295-61 RES-CHIP CARBON CARBON RES-CHIP SHORT CHIP 10K 220 220 1K 0 5% 5% 5% 5% 1/10W 1/4W 1/4W 1/10W R215 R216 R217 R218 R219 1-216-061-00 1-216-061-00 1-216-059-61 1-216-059-61 1-216-025-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 3.3K 3.3K 2.7K 2.7K 100 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R220 R221 R222 R225 R228 1-216-025-61 1-216-025-61 1-216-057-61 1-216-077-61 1-216-295-61 RES-CHIP RES-CHIP RES-CHIP RES, CHIP 15K SHORT CHIP 100 100 2.2K 5% 5% 5% (2012) 1/10W 1/10W 1/10W 0 R229 R230 R231 R234 R235 1-216-053-61 1-216-053-61 1-216-049-61 1-216-113-61 1-216-113-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1.5K 1.5K 1K 470K 470K 5% 5% 5% 5% 5% R240 R241 R242 R243 R244 1-216-077-61 1-216-077-61 1-216-073-61 1-216-073-61 1-216-113-61 RES, CHIP 15K RES, CHIP 15K RES-CHIP RES-CHIP RES-CHIP 10K 10K 470K (2012) (2012) 5% 5% 5% 1/10W 1/10W 1/10W R248 R249 1-216-093-11 1-216-049-61 METAL CHIP RES-CHIP 68K 1K 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W DESCRIPTION REMARK R300 R301 R302 1-216-033-61 1-216-033-61 1-216-033-61 RES-CHIP RES-CHIP RES-CHIP 220 220 220 5% 5% 5% 1/10W 1/10W 1/10W R303 R304 R305 R306 R307 1-216-033-61 1-216-051-61 1-216-045-00 1-216-039-61 1-216-033-61 RES-CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP 220 1.2K 680 390 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R308 R309 R310 R311 R312 1-216-027-61 1-216-029-61 1-216-039-61 1-216-057-61 1-216-033-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 120 150 390 2.2K 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R313 R314 R315 R316 R317 1-216-037-61 1-216-037-61 1-216-081-61 1-216-031-61 1-216-041-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 330 330 22K 180 470 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R318 R319 R320 R323 R324 1-216-081-61 1-216-041-61 1-216-081-61 1-216-041-61 1-216-041-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 22K 470 22K 470 470 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R325 R326 R327 R328 R329 1-216-081-61 1-216-081-61 1-216-049-61 1-216-025-61 1-216-043-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 22K 22K 1K 100 560 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R330 R331 R332 R333 R334 1-216-295-61 1-216-295-61 1-216-295-61 1-216-041-61 1-216-025-61 SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP 0 0 0 470 100 5% 5% 1/10W 1/10W R335 R336 R337 R339 R340 1-216-025-61 1-216-025-61 1-216-073-61 1-216-035-61 1-163-031-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP CERAMIC CHIP 100 100 10K 270 0.01UF 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 50V R342 R345 R348 R350 R353 1-216-295-61 1-216-025-61 1-216-025-61 1-216-039-61 1-216-119-61 SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 0 100 100 390 820K 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W R354 R355 R356 R357 R358 1-216-119-61 1-216-061-00 1-216-061-00 1-216-101-61 1-216-025-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 820K 3.3K 3.3K 150K 100 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R360 R361 R362 R363 R364 1-216-065-61 1-216-033-61 1-216-083-61 1-216-295-61 1-216-077-61 RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES, CHIP 15K 4.7K 220 27K 0 5% 5% 5% 1/10W 1/10W 1/10W R365 R367 R368 R369 R370 1-216-295-61 1-216-099-61 1-216-049-61 1-216-123-61 1-216-083-61 SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 0 120K 1K 1.2M 27K R371 R374 R376 1-208-820-11 1-216-057-61 1-216-295-61 METAL CHIP RES-CHIP SHORT CHIP 39K 2.2K 0 – 47 – (2012) 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 0.5% 5% 1/10W 1/10W KV-HA21M80 RM-969 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. A REF NO. PART NO. DESCRIPTION REMARK R389 R392 1-216-109-61 1-216-069-61 RES-CHIP RES-CHIP 330K 6.8K R393 R400 R401 R402 R403 1-216-295-61 1-216-295-61 1-216-049-61 1-216-025-61 1-216-073-61 SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP 0 0 1K 100 10K 5% 5% 5% 1/10W 1/10W 1/10W R404 R405 R406 R407 R408 1-216-049-61 1-216-073-61 1-216-113-61 1-216-049-61 1-216-049-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1K 10K 470K 1K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R409 R410 R411 R412 R413 1-216-113-61 1-216-025-61 1-216-049-61 1-216-049-61 1-216-113-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 470K 100 1K 1K 470K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R414 R415 R416 R417 R418 1-216-049-61 1-216-073-61 1-216-073-61 1-216-021-61 1-216-025-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1K 10K 10K 68 100 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R419 R420 R421 R422 R423 1-216-689-11 1-216-049-61 1-216-049-61 1-216-091-61 1-216-689-11 RES, CHIP 39K RES-CHIP RES-CHIP RES-CHIP RES, CHIP 39K 1K 1K 56K (2012) 5% 5% 5% (2012) 1/10W 1/10W 1/10W R424 R425 R426 R427 R428 1-216-091-61 1-216-022-00 1-216-049-61 1-216-051-61 1-216-041-61 RES-CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP 56K 75 1K 1.2K 470 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R429 R430 R431 R432 R433 1-216-073-61 1-216-063-61 1-216-091-61 1-216-121-61 1-216-091-61 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 3.9K 56K 1M 56K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R434 R435 R436 R438 R440 1-216-049-61 1-216-121-61 1-216-022-00 1-216-049-61 1-216-121-61 RES-CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP 1K 1M 75 1K 1M 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R443 R445 R446 R500 R501 1-216-121-61 1-216-089-61 1-216-089-61 1-260-126-11 1-249-419-11 RES-CHIP RES, CHIP 47K RES, CHIP 47K CARBON CARBON 1M 1/10W 180K 1.5K 5% (2012) (2012) 5% 5% 1/2W 1/4W R502 R503 R504 R505 R506 1-216-370-11 1-216-091-61 1-216-091-61 1-216-065-61 1-260-125-11 METAL OXIDE RES-CHIP RES-CHIP RES-CHIP CARBON 1.2 56K 56K 4.7K 150K 5% 5% 5% 5% 5% 2W 1/10W 1/10W 1/10W 1/2W R507 R508 R509 R510 R511 1-260-288-11 1-260-288-11 1-260-288-11 1-260-127-11 1-215-449-00 CARBON CARBON CARBON CARBON METAL 0.47 0.47 0.47 220K 15K 5% 5% 5% 5% 1% 1/2W 1/2W 1/2W 1/2W 1/4W R512 R513 R514 R553 R554 1-215-453-00 1-215-445-00 1-249-421-11 1-249-385-11 1-216-057-61 METAL METAL CARBON CARBON RES-CHIP 22K 10K 2.2K 2.2 2.2K 1% 1% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/10W 5% 5% REF NO. PART NO. 1/10W 1/10W DESCRIPTION REMARK R557 R558 R559 R563 R564 1-216-655-11 1-216-081-61 1-216-089-61 1-216-655-11 1-215-865-11 METAL CHIP RES-CHIP RES, CHIP 47K METAL CHIP METAL OXIDE 1.5K 22K 1/10W 1/10W 1.5K 220 0.5% 5% (2012) 0.5% 5% R565 R567 R568 R600 R602 1-216-350-11 1-208-790-11 1-215-461-00 1-215-915-11 1-240-262-11 METAL OXIDE METAL CHIP METAL METAL OXIDE CEMENTED 1.2 2.2K 47K 470 0.68 5% 0.5% 1% 5% 5% 1W 1/10W 1/4W 3W 10W R603 R605 R606 R608 R609 1-240-262-11 1-217-191-21 1-216-045-00 1-260-127-11 1-216-091-61 CEMENTED METAL METAL CHIP CARBON RES-CHIP 0.68 0.18 680 220K 56K 5% 10% 5% 5% 5% 10W 2W 1/10W 1/2W 1/10W R610 R611 R612 R615 R617 1-215-926-00 1-216-067-00 1-249-420-11 1-215-877-11 1-216-049-61 METAL OXIDE METAL CHIP CARBON METAL OXIDE RES-CHIP 33K 5.6K 1.8K 22K 1K 5% 5% 5% 5% 5% 3W 1/10W 1/4W 1W 1/10W R619 R620 R623 R624 R627 ! 1-240-917-51 1-249-389-11 1-216-053-61 1-260-126-61 1-240-262-11 METAL CARBON RES-CHIP CARBON CEMENTED 8.2M 4.7 1.5K 180K 0.68 5% 5% 5% 5% 5% 1W 1/4W 1/10W 1/2W 10W R800 R801 R802 R803 R806 1-216-049-61 1-216-081-61 1-215-917-11 1-260-332-51 1-216-295-61 RES-CHIP RES-CHIP METAL OXIDE CARBON SHORT CHIP 1K 22K 1K 2.2K 0 5% 5% 5% 5% 1/10W 1/10W 3W 1/2W R808 R810 R811 R812 R813 1-249-421-11 1-215-886-11 1-215-911-11 1-215-917-11 1-216-049-61 CARBON METAL OXIDE METAL OXIDE METAL OXIDE RES-CHIP 2.2K 100 100 1K 1K 5% 5% 5% 5% 5% 1/4W 2W 3W 3W 1/10W R814 R860 R861 R862 R863 1-215-917-11 1-216-103-61 1-216-295-61 1-216-057-61 1-216-073-61 METAL OXIDE METAL CHIP SHORT CHIP RES-CHIP RES-CHIP 1K 180K 0 2.2K 10K 5% 5% 3W 1/10W 5% 5% 1/10W 1/10W R864 R865 R866 R867 R868 1-208-794-11 1-216-073-61 1-216-049-61 1-208-812-11 1-249-393-11 METAL CHIP RES-CHIP RES-CHIP METAL CHIP CARBON 3.3K 10K 1K 18K 10 0.5% 5% 5% 0.5% 5% 1/10W 1/10W 1/10W 1/10W 1/4W R869 R870 R874 R878 R879 1-249-381-11 1-218-760-11 1-215-475-00 1-216-049-61 1-216-057-61 CARBON METAL CHIP METAL RES-CHIP RES-CHIP 1 220K 180K 1K 2.2K 5% 0.5% 1% 5% 5% 1/4W 1/10W 1/4W 1/10W 1/10W R880 R881 R882 R883 R884 1-216-097-61 1-216-085-00 1-216-073-61 1-216-067-00 1-216-089-61 RES-CHIP METAL CHIP RES-CHIP METAL CHIP RES, CHIP 47K 100K 33K 10K 5.6K 5% 5% 5% 5% (2012) 1/10W 1/10W 1/10W 1/10W R885 R886 R887 R888 R889 1-216-073-61 1-216-295-61 1-215-477-00 1-215-477-00 1-208-830-11 RES-CHIP SHORT CHIP METAL METAL METAL CHIP 10K 0 220K 220K 100K 5% 1/10W 1% 1% 0.5% 1/4W 1/4W 1/10W – 48 – 1/10W 1W KV-HA21M80 RM-969 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. A CV DESCRIPTION REMARK <VARIABLE RESISTOR> RV300 1-241-769-11 1-692-431-21 1-692-431-21 1-692-431-21 1-692-431-21 1-692-431-21 S006 S600 S800 1-692-431-21 ! 1-571-433-31 1-572-707-11 SWF100 1-781-042-11 ! 1-453-329-21 T600 T601 T800 1-431-747-11 ! 1-437-333-21 1-435-374-11 SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE 1-102-114-00 1-102-115-00 CERAMIC CERAMIC 470PF 560PF 10.00% 50V 10.00% 50V C714 C716 C717 C718 C719 1-102-115-00 1-126-933-11 1-102-852-91 1-126-933-11 1-102-116-00 CERAMIC ELECT CERAMIC ELECT CERAMIC 560PF 100UF 47PF 100UF 680PF 10.00% 20.00% 5.00% 20.00% 10.00% 50V 16V 50V 16V 50V CLP701 * 4-042-408-01 SWITCH, TACTILE SWITCH, PUSH (AC POWER) SWITCH, LEVER 1-803-744-11 CN701 * 1-564-508-11 CN702 1-695-915-11 CN703 * 1-564-509-11 CN704 1-695-915-11 FILTER, SURFACE WAVE 8-598-591-10 TRANSFORMER ASSY FLYBACK (NX-4751//M3A4) TRANSFORMER, LINE FILTER TRANSFORMER, CONVERTER (SRT) TRANSFORMER, FERRITE (HDT) THERMISTOR, POSITIVE 1-803-830-11 1-577-358-21 1-567-505-11 1-567-504-11 1SS119-25 1SS119-25 1SS119-25 1SS119-25 1SS119-25 D709 D713 D714 D715 D716 8-719-911-19 8-719-911-19 8-719-911-19 8-719-911-19 8-719-911-19 1SS119-25 1SS119-25 1SS119-25 1SS119-25 1SS119-25 D717 8-719-070-16 NNCD9.1A-T1 J701 1-540-071-22 VARISTOR (ERZV14D621) SOCKET, CRT <COIL> L701 L710 1-414-185-41 1-414-183-41 VIBRATOR, CERAMIC OSCILLATOR, CRYSTAL OSCILLATOR, CRYSTAL INDUCTOR INDUCTOR 22UH 10UH <TRANSISTOR> ************************************************************** CV BOARD MOUNTED (NOT STOCKED) ********************* 4-382-854-01 8-719-911-19 8-719-911-19 8-719-911-19 8-719-911-19 8-719-911-19 <JACK> <CRYSTAL> X001 X300 X301 D701 D702 D703 D707 D708 TUNER, VSS BT-AG402 <VARISTOR> VDR600 PLUG, CONNECTOR 5P TAB (CONTACT) PLUG, CONNECTOR 6P TAB (CONTACT) <DIODE> <TUNER> TU100 PIN, COATING LEAD <CONNECTOR> <THERMISTOR> THP600 REMARK C712 C713 <TRANSFORMER> T503 DESCRIPTION RES, ADJ, CARBON 470K <SWITCH> S001 S002 S003 S004 S005 REF NO. PART NO. SCREW (M3X8), P, SW (+) Q704 Q705 Q706 Q707 Q708 8-729-326-11 8-729-326-11 8-729-326-11 8-729-200-17 8-729-200-17 2SC2611 2SC2611 2SC2611 2SA1091-O 2SA1091-O Q709 Q710 Q711 Q712 8-729-200-17 8-729-119-78 8-729-119-78 8-729-119-78 2SA1091-O 2SC2785-HFE 2SC2785-HFE 2SC2785-HFE <CAPACITOR> <RESISTOR> C701 C702 C703 C704 C706 1-115-350-51 1-102-074-00 1-107-651-11 1-130-202-00 1-126-947-11 CERAMIC CERAMIC ELECT FILM ELECT 0.0047UF 0.001UF 4.7UF 0.022UF 47UF 10.00% 20.00% 5.00% 20.00% 2KV 50V 250V 400V 16V C708 C709 C710 1-102-114-00 1-102-114-00 1-102-114-00 CERAMIC CERAMIC CERAMIC 470PF 470PF 470PF 10.00% 50V 10.00% 50V 10.00% 50V R703 R706 R707 R708 R710 1-219-752-11 1-215-417-00 1-215-413-00 1-216-387-11 1-216-486-00 METAL METAL METAL METAL OXIDE METAL OXIDE 100K 680 470 0.68 8.2K 5% 1% 1% 5% 5% 1/2W 1/4W 1/4W 3W 3W R712 R714 R716 1-216-486-00 1-216-486-00 1-249-923-11 METAL OXIDE METAL OXIDE CARBON 8.2K 8.2K 1K 5% 5% 5% 3W 3W 1/4W – 49 – KV-HA21M80 RM-969 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. CV REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. R717 R718 1-249-923-11 1-249-923-11 CARBON CARBON R725 R726 R727 R728 R729 1-249-421-11 1-249-421-11 1-249-421-11 1-249-408-11 1-249-408-11 R730 R731 R732 R733 R734 DESCRIPTION REMARK 1K 1K 5% 5% 1/4W 1/4W *************************************************************** CARBON CARBON CARBON CARBON CARBON 2.2K 2.2K 2.2K 180 180 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W 1-249-408-11 1-249-407-11 1-249-407-11 1-249-407-11 1-219-753-11 CARBON CARBON CARBON CARBON METAL 180 150 150 150 100 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/2W R738 R739 R740 R755 R756 1-247-807-31 1-247-807-31 1-247-807-31 1-249-418-11 1-249-418-11 CARBON CARBON CARBON CARBON CARBON 100 100 100 1.2K 1.2K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R757 1-249-418-11 CARBON 1.2K 5% 1/4W ACCESSORIES AND PACKING MATERIALS *************************************** 3-701-910-00 1-501-730-41 * 4-039-372-01 * 4-089-642-01 * 4-089-641-01 SCREW, SPECIAL (DIA. 3.8X20) ANTENNA, TELESCOPIC BAG, PROTECTION CUSHION, LOWER CUSHION, UPPER * 4-092-808-01 1-417-151-41 4-392-003-11 4-392-004-11 INDIVIDUAL CARTON MATCHING TRANSFORMER, ANTENNA BAND, HOLD CLIP *************************************************************** BATTERY COVER REMOTE COMMANDER ************************************** <VARIABLE RESISTOR> RV702 1-241-656-11 RES, ADJ, METAL FILM 110M 1-477-047-11 4-084-290-01 REMOTE COMMANDER (RM-969) BATTERY COVER REMOTE COMANDER Sony Corporation 9-872-344-01 Sony Technology Malaysia Sdn. Bhd. Visual Products – 50 – English 2002.10