Download - Allison Transmissions
Transcript
; ; V01717 Figure 4–2. Converter Axial Location Measurement h. Flexplate Bolt Hole Flatness. Flexplate flatness in the area of the bolt holes is not a measurement required for the MD 3070PT transmission. i. Torque Converter Axial Location. Refer to Figure 4–2. Using depth gauge, measure from the torque converter housing to the torque converter’s flexplate adapter mounting face. The torque converter axial location should measure 50.76 mm (1.998 inch). 4–2. CHECKING FLEXPLATE DRIVE ASSEMBLY a. Flexplate Inspection. Check the flexplate for cracks, distortion, or elongated bolt holes. Replace a worn or damaged flexplate. b. Engine Crankshaft End Play. Ensure engine crankshaft end play is within the engine manufacturer’s specifications. 28