Download - Allison Transmissions

Transcript
If equipped with a thermocouple:
— Install the thermocouple and connect the leads.
• Install and connect other electrical components such as — heaters,
winterization equipment, and pressure sensors.
• If equipped, install the pressure gauge tube or line.
• Check that all unused hydraulic openings are plugged.
5–9.
FILLING HYDRAULIC SYSTEM
• Select a transmission fluid — refer to Paragraph 1–5.
• Fill the transmission with the required amount of fluid — refer to Paragraph 1–8.
• Run the engine for about one minute and check the fluid level — refer to
Paragraph 1–3.
5–10. INSTALLATION CHECKLIST
Complete the Installation Checklist in Section VI.
39