Download ReadyLift - Jack
Transcript
ReadyLift® (Part# 69-2537 & 69-2538) Installation Instructions 2005-UP Ford F-250/F-350 Super Duty 4WD Please read instructions thoroughly and completely before beginning installation. Installation by a trained mechanic is highly recommended. Please note that this 5” block kit will replace the factory 2”(F250)or 4”(F350) block kit and provide 3”(F250) or 1”(F350) of additional lift over the factory ride height. DO NO STACK BLOCKS AS IT IS DANGEROUS TO YOU AND OTHERS, AND IS ILLEGAL IN MOST STATES. 14. Rear Block Installation Remove the four 24mm nuts on one side. Remove the U-bolts. Using a jack, carefully raise the truck by the leaf spring until OEM block is loose and there is enough room the for new block. Install ReadyLift® 5” rear block. Please note that the arrow on the bottom of the block points to the front of the truck. Install ReadyLift® U-bolts using the hardware provided. Torque to factory specs. Repeat on opposite side. Be sure to double check that all hardware has been tightened and torqued to factory specs. Remount wheels and tires and torque to factory specs. Re-torque wheels after 25 miles. *See next page for Tire/wheel fitment specifications. Wheel Alignment; a Certified Alignment Technician that is experienced with lifted vehicles is recommended to perform the alignment. *It is recommended that you have your vehicle’s alignment checked whenever installing new tires. *It is also recommended that you adjust your headlights whenever your vehicle’s ride height is altered. Warning! This ReadyLift® Leveling Kit is designed and engineered to level out a stock vehicle with no prior modifications. The use of this kit along with items such as suspension lifts , body lifts or any other type of lifting accessory shall be done at the vehicles owners risk and will void any and all warranties in effect or implied by ReadyLift®. This kit is not for off road abuse. ReadyLift® 2060 Placentia Ave Suite B-1, Costa Mesa, CA 92627 Toll Free (800)549-4620 Local (949)515-0795 Fax (949)515-0655