Download VQ35DE

2004 G35 Sedan – A/T
PRECAUTIONS
•
•
•
•
•
•
•
Before performing any diagnostic test, vehicle should be driven for approximately 10 minutes
to raise transmission to the proper operating temperature of 122° to 176°.
During stall testing, never hold throttle wide open for more than 5 seconds at a time. Extended
stall testing can overheat transmission and cause serious damage.
Nissan Matic 'J' ATF is the only fluid accepted for warranty, service contracts and goodwill
repairs.
Before performing any internal repairs, thoroughly clean the outside of the transmission case
to prevent contamination.
Use lint free cloth or towels for wiping parts. Common shop towels can leave contaminating
fibers on the transmission parts and cause improper transmission operation.
When servicing the valve body, valves, sleeves, plugs, etc. should slide along the bores in the
valve body under their own weight.
Before assembly, apply a coat of ATF to all internal transmission parts. Use petroleum jelly to
protect o-rings and seals, or to hold bearings and washers in place during assembly.
Important Note: Nissan Matic 'J' must be used in performing repairs paid by Infiniti for the 2003
and later G35, such as warranty, service contract, or good-will repairs. There will not be
reimbursement for repairs when non-genuine Nissan Matic 'J' is used.
2004 G35 Sedan – Quick Reference – A/T
5