Download MSG425 Service Manual - Rev 1 - Small

MSG‐425 ENGINE 13. Install the variable camshaft timing (VCT)
system oil filter and the plug in the intake
camshaft thrust cap
 Torque: 12.5 lb-ft (17Nm)
16. Holding the oil pump chain sprocket in place,
tighten oil pump sprocket bolt:
 Tighten to 25 Nm (18 lb-ft).
17. Install oil pump chain guide and shoulder bolt:
 Tighten to 10 Nm (89 lb-in).
14. Install the VCT solenoid and the bolt.
 Torque: 7.3 lb-ft (10Nm)
18. Install oil pump chain tensioner. Hook spring
around shoulder bolt and tighten:
 Tighten to 10 Nm (89 lb-in).
15. Install washers and oil pump chain and
sprockets.
NOTE: Sprockets must turn freely on the camshafts.
19. Position camshaft sprockets and loosely install
bolts.
CAUTION: Do not compress the ratchet assembly.
This will damage the ratchet assembly.
NOTE: The crankshaft sprocket flange must be facing
away from the engine block.
20. Using the edge of a vise, compress the timing
chain tensioner plunger.
02‐37