Download - Brunswick

Ball Cushion and Pit Curtain
1.
Inspect the condition and mounting hardware on the ball cushion board
and the impact strips. Check the attachment of the rubber cushion to the
board and the facing to the rubber cushion. Inspect the cushion frame
welds, and check the mounting hardware. Inspect the nylon cushion
bearings for wear and check the location and hardware on the stop
collars. Inspect the cushion assembly for proper adjustment.
2.
Inspect the mounting, and adjustment of ball cushion shock absorber.
Inspect the mounting and location of the shock absorber adjustment
plate.
3.
Inspect the condition and mounting of the overflow chutes. Inspect the
condition and adjustment of the overflow socks.
4.
Inspect the condition of the pit curtain and check the mounting hardware.
Ball Accelerator Assembly
1.
Inspect the condition of the frame welds. Check that foot guards are in
place. Inspect the condition and location of the ladder.
2.
Inspect the condition and mounting hardware on the ball door protector
plate.
3.
Inspect the accelerator motor. Check for excessive vibration.
4.
Inspect the condition of the flat belt.
5.
Inspect the ball door and ball door locking mechanism for proper adjustment. Check the condition of the ball door, ball door button and door
locking bolt. Inspect the ball door solenoid for correct operation. Check
the routing of the solenoid cable. Verify that ball door shafts rotate
freely.
Sweep Wagon Assembly
1.
Inspect the condition of the sweep wagon frame and frame welds.
Check the roller mounting and adjustment. Check the conditions of the
pusher rods and pusher rod bushings. Inspect the conditions of the
protector blocks and block mounting hardware. Check all sweep wagon
hardware.
Section 7: Preventive Maintenance
7-7