Download Installation Instructions

22.
Remove the rear bumper cover from the vehicle and set it aside.
23.
Remove the two bolts mounting the spare tire winch crank to the passenger’s
side frame rail Figure 16. Save bolts.
Figure 16
24.
Remove the bolt mounting the spare tire winch to the frame crossmember and
remove the winch and winch crank from the vehicle Figure 17. Save winch
mounting bolt.
Figure 17
25.
Remove the three bolts mounting the rear bumper/hitch to each of the frame rails
and remove the bumper/hitch from the vehicle Figure 18. Save hardware
C9212 Installation - pg. 9