Download XD4 Label Printer.

Technical Data.
For double-sided printing with centered material guide
›Two stacked printing units for simultaneous printing of front and back.
›The gap height at the material sensor for flat tubes and plastic
tapes is up to 4 mm.
› No adjustment of the printhead for different widths of material.
›For continuous or prefabricated materials such as paper, card­
›The print speed for difficult printable materials is set to between
30 and 125 mm/sec.
› Operation and software are compatible with the A+ series.
board, textiles and plastics.
2
8
7
1
3
4
5
6
Label printer XD4M with centred material guide
1
2
3
Big graphic display
Peripheral connection
winding). The spring-mounted margin stop
White backlight for optimum readability.
Add-on modules such as cutters, external
ensures constant tension during feeding,
Ribbon holder
rewinders, present sensors and
Three-part tightening axles enable quick
applicators are easy to connect via the
and easy ribbon exchange.
USB peripheral interface. All peripherals
The three-part tightening axles ensure the
Straightforward adjustment
are connected to the printer in seconds
easy rewinding and removing of labels or
The printhead is pressed down with two
using two pins and fixed in place with a
sliding toggles. The materials are center
screw.
aligned. There is no need of printhead
5
6
adjustments for different material widths.
4
Material guide
Precise printing as the material guide is
7
Internal rewinder
liners with or without paper core.
9
Only one tool for all maintenance tasks
Solid metal housing
For exchanging wear parts and
Made of die-cast aluminum.
connecting peripherals, the Allen key is
All components are mounted on it.
located ready to hand at the printer.
Roll holder
located directly behind the print roller.
Available for core diameters from 38 mm.
The width is adjusted using a spindle.
(We provide adapters for core diamters
wider than 76 mm for improved label
cab | 2
thus ensuring a highly precise imprint.
8