Download XYNERGI Post V5 Operator Manual_001 9570KB

TIME DOMAIN PROCESSING
November 7, 2014
Time Domain Processing
Bender
Bender is a new suite of time domain processes available to all users in V5 software. It comes in two
flavours.
Render Bender is a high-quality static process for pitch and time compression.
ClipBender is a real-time processor that provides “bend points” within a clip, and processes them nondestructively.
Render Bender
Render Bender can provide time compression without pitch change, or vice versa, or a combination of
the two. It works on the current clip (the red one under the cursor) or the selected range of clips.
To use Render Bender, click the menu item:
Process  Render Bender
The following dialog box appears.
You may set a Time Factor, affecting the length of the selected clip(s), and an independent Pitch Factor,
affecting the pitch.
If Varispeed is selected, the Time Factor is automatically set, inversely proportional to the Pitch Factor.
The result is similar to speeding up or slowing down a Tape Recorder (a WHAT??)
The Formant Factor affects the frequency response of the result, sounding a bit like a band-pass filter on
full-spectrum audio. Setting it to Auto will normally give neutral results, where the spectrum of the audio
is little changed.
Fairlight XYNERGI
Page 171