Download Edge Products 15051 Computer Chip Programmer Installation

Evolution
FORD 4.6 and 5.4 Liter
3. Select the style which you would like the parameters to be displayed
on your screen and press [ENTER]. Depending on which display you
select, a screen similar to the following appears:
4. This screen lists the current parameters being displayed and their
respective positions on the screen (i.e., TOP LEFT, etc.). Select the
position you would like to change and press [ENTER]. A list of
available parameters will be displayed. Select the parameter you would
like to view and press [ENTER]. (A list of commonly used acronyms
is located in the back of this manual and a in depth list of the PIDs
supported is shown in the “About Evolution” section). Once you have
selected your desired parameters, select the Set as Display option and
press [ENTER]. You will return to the Setup menu with your new
settings saved.
NOTE: If you choose to display Average Miles Per Gallon (AMPG), you may need to
reset it from time to time. To do so, from the main screen, press the enter button twice in
rapid succession, this will reset the AMPG and it will start over.
31