Download Ref. Charge - Koolant Koolers

STARTUP CHECKLIST
•
•
•
•
POWER SUPPLY: Verify that the power supplying to the chiller matches the
requirements as stated on the nameplate. Connecting chiller to the wrong power
supply will damage system components and void the warranty.
FILL THE RESERVOIR: Using the fill port on the top of the chiller to add
water until the level reaches the red line marked on the sight glass.
DO NOT USE DEIONIZED WATER!!
Connect Discharge and Return Piping: Connect your piping to the two female
fitting on the front of the chiller. Rubber Hose, PVC, and copper are acceptable
piping materials. Do not use any ferrous piping material, as they will damage the
chiller’s water loop system. Doing so will cause damage to the chiller that is not
covered by warranty.
Check for proper rotation: (Not applicable for this model)
5