Download A140E AUTOMATIC TRANSAXLE
Transcript
AX1–32 AUTOMATIC TRANSAXLE – ASSEMBLY REMOVAL AND INSTALLATION 26. CONNECT SHIFT CONTROL CABLE (a) Install the clip to the control cable. (b) Install the nut. (c) Adjust the control cable. (See page AX1–55) 27. CONNECT OIL COOLER HOSE 28. CONNECT SOLENOID CONNECTOR 29. CONNECT PARK/ NEUTRAL POSITION SWITCH CONNECTOR 30. INSTALL STARTER (a) Install the starter with 2 bolts. Torque: 39 N–m (400 kgf–cm, 29 ft–lbf) (b) Connect the connector and nut.