Download PROMATRIX paging stations DPC 4000
Transcript
SERVICE MANUAL PROMATRIX paging stations DPC 4000 1 2 3 4 5 6 7 8 9 10 ALARM 11 12 13 14 15 16 17 18 19 20 DPC 4550 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 L ÖSCHEN EIN STO PP PROG RAMM TEXT SPRECHEN ESC ALL E GO NG BUSY Table of Contents - Safety and Service Instructions Warranty Measuring data Bill of materials Circuit diagrams TELEX / EVI Audio GmbH - Service Department Hirschberger Ring 45 94315 Straubing Tel.: ++49-9421/706-342 Fax.: ++49-9421/706-350 e-mail: [email protected] IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintance (servicing) instructions in the literature accompanying the appliance. 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a damp cloth. Do not block any of the ventilation openings. Install in accordance with the manufactures instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat. Only use attachments/accessories specified by the manufacturer. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 8. 9. 10. For US and CANADA only: Do not defeat the safety purpose of the grounding-type plug. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrican for replacement of the absolete outlet. IMPORTANT SERVICE INSTRUCTIONS CAUTION: These servicing instructions are for use by qualified personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the Operating Instructions unless you are qualified to do so. Refer all servicing to qualified service personnel. 1. Security regulations as stated in the EN 60065 (VDE 0860 / IEC 65) and the CSA E65 - 94 have to be obeyed when servicing the appliance. 2. Use of a mains separator transformer is mandatory during maintenance while the appliance is opened, needs to be operated and is connected to the mains 3. Switch off the power before retrofitting any extensions, changing the mains voltage or the output voltage. 4. The minimum distance between parts carrying mains voltage and any accessible metal piece (metal enclosure), respectively between the mains poles has to be 3 mm and needs to be minded at all times. The minimum distance between parts carrying mains voltage and any switches or breakers that are not connected to the mains (secondary parts) has to be 6 mm and needs to be minded at all times. 5. Replacing special components that are marked in the circuit diagram using the security symbol (Note) is only permissible when using original parts. 6. Altering the circuitry without prior consent or advice is not legitimate. 7. Any work security regulations that are applicable at the location where the appliance is being serviced have to be strictly obeyed. This applies also to any regulations about the work place itself. 8. All instructions concerning the handling of MOS - circuits have to be observed. Note: SAFETY COMPONENT (HAS TO BE REPLACED WITH ORIGINAL PART ONLY) 1-2 GARANTIE WARRANTY GARANTIE Das Werk leistet Garantie für alle nachweisbaren Material- und Fertigungsfehler für die Dauer von 36 Monaten ab Verkauf. Garantieleistungen werden nur dann anerkannt, wenn gültige, d.h. vollständig ausgefüllte Garantieunterlagen vorliegen. Von der Garantie ausgenommen sind alle Schäden, die durch falsche oder unsachgemäße Bedienung verursacht werden. Bei Fremdeingriffen oder eigenmächtigen Änderungen erlischt jeder Garantieanspruch. The manufacturer’s warranty covers all substantial defects in materials and workmanship for a period of 36 months from the date of purchase. Liability claims are accepted solely, when a valid – correctly and completely filled out – Warranty Registration form is presented by the original owner of the product. The warranty does not cover damage that results from improper or inadequate treatment or maintenance. In case of alteration or unauthorized repairs, the warranty is automatically terminated. La garantie constructeur couvre tous les défauts matériels et de main d’œuvre pour une période de 36 mois à compter de la date d’achat. La garantie ne sera reconnue que si la Carte de Garantie, correctement et complètement remplie, est présentée par l’acheteur d’origine du produit. Les dommages dus à un mauvais maniement de l’appareil, à un traitement ou une maintenance incorrects ou inadéquats ne sont pas garantis. Toute modification ou intervention effectuée par une personne non qualifiée entraîne la résiliation automatique de la garantie. GmbH • Hirschberger Ring 45 • 94315 Straubing •Telefon (09421) 706-0 •Telefax (09421) 706-265 Änderungen vorbehalten. Subject to change without prior notice. Printed in Germany 07. 07. 1999 / Internet: http:// www.dynacord.de Measured Datas DPC-Series Paging Stations 4510, 4520, 4530, 4550, 4010, 4020, 4106 Printed Boards 80431, 80432, 80455, 80433, 80435, 80436, 80462 1. General 1.1 Testing has been performed using the following equipment: System One Audio Precision Digital-Multi-Meter PM 2517x Philips Level Tester UPM 550 Sennheiser 1.2 Notes on the measurement: Testing has to be performed according to the IEC 268-3 standard. Unless differently specified, all tests are referenced to nominal output level and are performed with nominal load impedance R = 10k at the NF-OUTPUT. Tolerance ±10% (unless otherwise specified) Environmental temperature for all measuring: 20°C ± 2°C Supply voltage: 24 volts 2. Power Supply Current Carrying Capacity Test (cord length 1m): Engage the paging station’s service mode All tests are performed with a measuring tolerance of +/-1.5% (depending on the used measuring equipment) 18.24V = 24V - 24% (minimum voltage of the paging console MT 400) 31.2V = 24V + 30% 15.5V = Voltage value, which is the threshold for the undervoltage recognition to activate the converter. Voltage testing at pins 1 and 2 of the paging station’s RJ45-socket (CN3). Page 1 Current Carrying Capacity in mA with the following functions: Paging station Voltage Idling All LED’s ON Uin (V) Relay pulled + all LED’s ON Alarm-LED lights DPC4010 / 15.5 55 80 90 120 DPC4510 18.24 50 60 70 100 24 40 50 55 80 31.2 35 40 45 65 DPC4020 / 15.5 55 90 100 120 DPC4520 18.24 50 70 80 100 24 40 55 65 80 31.2 35 45 55 65 15.5 55 95 110 120 18.24 50 85 95 100 24 40 65 75 80 31.2 35 55 60 65 15.5 55 120 135 120 18.24 50 100 110 100 24 40 80 85 80 31.2 35 65 70 65 15.5 40 55 - - 18.24 35 50 - - 24 30 45 - - 31.2 30 35 - - 15.5 55 65 75 - 18.24 50 55 65 - 24 40 45 55 - 31.2 35 40 45 - DPC 4530 DPC4550 DPC4350 DPC 4106 All other testing is performed with an operating voltage of 24V 3. Service Mode Description 3.1. Enter service mode. (up to software version V1.04) Simultaneously press the STOPP + PROGRAMM keys for approximately one second. The address assignment menu appears. Press the PROGRAMM key once. The password menu appears. Enter the service mode by entering the password 09421 using the area keys and acknowledge your entry by hitting the GONG(ESC) key. The STOP-LED blinks. The service mode is cancelled through pressing the area selection key 1, the GONG(ESC) key, or the SPRECHEN(BUSY) key. In service mode, the area selection keys function as direct selection keys; i. e. the corresponding test starts immediately after pressing the according area selection key. Blinking of the corresponding area LED indicates the actually selected function. The following table shows the corresponding functions that are assigned to individual area selection keys: Page 2 Direct selection keys, area selection keys 1 - 19 UP/DOWN Display DPC40x0 Display text DPC45x0 Brief description Detailed descriptions follow this table Test No. exit 1 2 3 4 5 ^ (STOP) KEY/LED-Test audiotest buzzer test ext. watchdog test rs485 looptest 6 7 8 rs485 tx-test rom identify initial settings 9 slave test 10 spi looptest 11 12 13 spi tx-test vcc-test A/D-test 14 15 16 17 18 19 Page 3 rel/mic delay pagetype edit eeprom clear led test v (TEXT) reset Cancel service mode by pressing ESC Keys and LED test Test of the different audio busses Piezzo buzzer test MAX 823 test (reset circuit) Send / Reception test of the RS485 interface Send test of the RS-485 interface ROM-checksum, software version The paging station's initial settings are being restored Tests the key-LED's of a connected extension Send / Reception test of the SPI interface Send test of the SPI interface Cathode D60 supply voltage test Hex-Code indication of the actual values of the processor's 8 A/Dconverter inputs Talk-button / output relay delay Determines the paging station type Erases the processor EEPROM Tests all LED´s and lamps of optional keys Software reset 3.2. Enter service mode. (starting with software version V1.1 and generally for the DPC4106) To enter service mode, simultaneously press the keys ON + PROGRAMM during power-on. The STOP-LED blinks. While in service mode, using the UP ^ or DOWN v keys selects the desired function and pressing the SPRECHEN(BUSY) actually starts the test. In case the test program (e. g. audio test) provides submenus, the keys < (ON) or > (Programm) can be used to select the desired menu entry. Pressing the GONG(ESC) key cancels the test. U P /D O W N D is p l a y t e x t D P C 4 5 x 0 Test e x it 1 2 ^ (STOPP) K E Y /L E D - T e s t a u d io te s t 3 4 5 buzzer test e x t. w a tc h d o g te s t r s 4 8 5 lo o p te s t 6 rs485 tx-test 7 r o m id e n tify 8 in i t i a l s e t t i n g s 9 s la v e t e s t 10 s p i lo o p te s t 11 s p i tx - t e s t 12 vcc-test 13 A /D - t e s t 14 r e l / m ic d e l a y 15 16 17 18 19 Test #1 p a g e t y p e e d it e e p r o m c le a r le d te s t v (TEXT) reset K u r z b e s c h r e ib u n g D e ta illie r t e B e s c h r e i b u n g e r f o lg t a n s c h l ie ß e n d a n d ie s e T a b e lle V e rla s s e n d e s S e r v i c e m o d u s d u r c h D r ü c k e n d e r E S C - T a s te Tasten und LED Test Testet die verschiedenen A u d io w e g e Testet den Piezzo-Sum m e r T e s t M A X 8 2 3 ( R e s e tb a u s te in ) Testet R S -485 Schnittstelle, s e n d e n u n d e m p fa n g e n Testet R S -485 Schnittstelle s e n d e m ä ß ig R O M -P rüfsum m e , S o f t w a r e v e r s io n S p rechstelle wird in den A u s lie f e r u n g s z u s t a n d g e b r a c h t bei einer angeschlossenen E x te n s io n w e r d e n d ie T a s te n Leds angesprochen T e s t e t S P I - S c h n itts te lle , s e n d e n u n d e m p fa n g e n T e s t e t S P I - S c h n itts te lle s e n d e m ä ß ig Versorgungsspannung an K a th o d e D 6 0 w ird g e m e s s e n Z e ig t d ie a k tu e lle n W e r t e d e r 8 A /D - W a n d le r e in g ä n g e d e s P rozessors Hexadezim a l an V e r z ö g e r u n g z w is c h e n Sprechentaste und A u s g a n g s r e la is E in s te lle n d e s S p r e c h s te lle n t y p s Löscht Prozessor EEPROM T e s t e a l l e L E D ´ s u n d L a m p e n in d e n o p tio n a l e n T a s te n S o ftw a r e r e s e t Exit service mode servicemode exit Pressing the area key 1, TALK key or ESC exits service mode. Test #2 KEY/LED-Test Pressing the area key 2 or correspondingly using the UP/DOWN keys followed by the TALK key ignites the key and LED test procedure. All LED´s and lamps of optional keys and switches is activated and the display shows accordingly: key/led test running ... Description: Press every single key to dim the corresponding LED. Caution: This test is automatically cancelled if for 3 seconds no key has been pressed or by pressing the ESC key. The following message appears on the display! Page 4 servicemode key/led test Test #3 AUDIO test Pressing the area key 2 or correspondingly using the UP/DOWN keys followed by the TALK key ignites the AUDIO test. The display shows the following message: audiotest int.frc cmp=off Up to software version V1.04, the following applies: Pressing area keys configures the audio signal path of a paging station for measurement and testing Key pressed (Led lights continuously) 1 2 area 1 3 6 area 1 + area 2 (area 6) area 1 + area 3 (+area 6) Kreis 1 + Kreis 4 (+Kreis 6) area 1 + area 5 7 8 area 6 taak 4 5 LCD display Function rel. off cmp = off No LF signal at the output, LF-relay dropped mute cmp = off LF signal muted, LF-relay pulls int. frc cmp = off Internal microphone is being switched trough (controlled by the processor), the compressor is off ext. mic cmp = off External Mic/Line input via microphone pre-amplifier is switched through, the compressor is ON ext. inp cmp = off External Mic/Line input without microphone preamplifier is switched through, the compressor is off pilot cmp = off Pilot tone signal is switched through (400mVss / 500Hz) ............ cmp = on Additional compressoris being activated int. tlk .............. The internal microphone is switched through as long as keeping the corresponding key pressed, LF-relay pulls The following applies to all consoles with software version V1.1 and higher as well as for the DPC 4106: Pressing the keys < (ON) or > (program) allows the user to configure a paging station’s audio signal path for measurement and testing. Key pressed 1 Sprechen (BUSY) 2 3 4 5 LCD display Function int. frc cmp = off internal microphone is switched through (controlled by the processor), compressor off ^ (STOP) rel. off cmp = off no LF-signal at the output, LF-relay dropped ^ (STOP) mute cmp = off LF-signal muted, LF-relay pulls Sprechen (BUSY) int. tlk cmp = off internal microphone is switched through as long as the key is pressed ^ (STOP) pilot cmp = off Pilot tone is switched through (400mVss / 500Hz) Page 5 6 ^ (STOP) int. frc 7 ^ (STOP) int. frc 8 ^ (STOP) ext. mic 9 ^ (STOP) ext. inp Test #4 cmp = off internal microphone is switched through (controlled by the processor), compressor off cmp = on Compressor ON, additionally cmp = on External Mic/Line input via microphone pre-amplifier is switched through, compressor off cmp = off External Mic/Line input without microphone preamplifier is switched through, compressor off BUZZER test Pressing the area key 4 or correspondingly using the UP/DOWN keys followed by the TALK key ignites the BUZZER test. The display shows the following message: buzzertest running ... Description: The internal piezo buzzer is audible with a frequency of 500 Hz. Pressing ESC cancels the BUZZER test. Test #5 EXTERNAL WATCHDOG test Pressing the area key 5 or correspondingly using the UP/DOWN keys followed by the TALK key ignites the EXTERNAL WATCHDOG test. The display shows the following message: ext. watchdog running ... Description: After 0 .. 2.4 seconds a hardware-reset is ignited via the external watchdog circuit and the paging console restarts in normal operation mode. Caution: To be able to continue testing, you have to re-enter the paging station’s service mode as described in paragraph 3.1. Test #6 RS-485 LOOP test Pressing the area key 6 or correspondingly using the UP/DOWN keys followed by the TALK key ignites the RS-485 LOOP test. The display shows the following message: rs 485 looptest running ... Description: During this test the processor generates a test pattern that is sent via the path PROCESSOR TXD-OUT à RS-485 driver circuit. At the same time the test pattern is received via the path RS-485 driver circuit à PROCESSOR RXD LINE. Page 6 Caution: Make sure that the RS-485 lines DATA+ and DATA– are open! In case the test completes successfully, after approximately 1s, the display shows the following: rs 485 looptest ok. If testing failed, the following message appears on the display: rs 485 looptest failure !!! Caution: This error message is also displayed when during testing the paging console is connected to the DPM 4000 using the standard connection cord. Test #7 RS-485 TX test Pressing the area key 7 or correspondingly using the UP/DOWN keys followed by the TALK key ignites the RS-485 TX test. The display shows the following message: rs 485 tx test running ... Description: During this test, a test pattern that is generated by the processor is sent via the path PROCESSOR TXD-OUT à RS-485 driver circuit. Pressing ESC cancels the RS-485 TX test. Test #8 ROM IDENTIFY Pressing the area key 8 or correspondingly using the UP/DOWN keys followed by the TALK key ignites the ROM IDENTIFY test. The display shows the following message:. rom identify running ... Description: An additive 16-Bit checksum over the entire flash-ROM is being generated. It is indicated on the display in HEX-Code as „ch xxxx“. In addition, the display shows the actual software revision as „vx.xxx“. rom identify ch xxxx vx.xxx Caution: This checksum depends on the paging station’s individual configuration. Therefore, it can vary between consoles of the same type that are differently configured. Prior to comparing checksums of identical consoles you have to perform the INITIAL SETTINGS function (test #9). During this procedure all userdefined configuration parameters are irreversibly lost. Page 7 Test #9 INITIAL SETTINGS Pressing the area key 9 or correspondingly using the UP/DOWN keys followed by the TALK key restores the INITIAL SETTINGS. The display shows the following message: initial settings press ´talk´ Description: Initial settings of the paging station are being restored. This includes the following basic settings: console-type name address type extension buzzer date format user access relay --> Mic delay Mic. priority LCD-contrast ALL key ERASE key ON key STOP key PRORAM key GONG key TEXT key SPRECHEN key ALARM key OPTION 1 key OPTION 2 key PTT (external) key group keys 1..100 group 0 groups 1 .. 30 actual measured type or, with erroneous testing, generally DPC 4510 untitled DPC4XXX OFF, 1 .. 32 extension port OFF, DPC 4350 extension ON, PTT-microphone, Line ON ON German, English Protected level (password: 09421) user level (password: 111) setup level (password: 2222) 15ms internal microphone, PTT-microphone 0 selects all 100 lines erases all 100 lines switches with a delay of 1s local, with priority 50 gong signal 4 in actual selection, with priority 80 text 1 in actual selection, with priority 20 announcement in actual selection, with priority 50 alarm 1 in all 100 lines, with priority 90, not protected OFF OFF announcements in all 100 lines, with priority 50 lines 1 .. 100 assigned all lines selected all lines erased Description of the DPC4106: Initial settings of the paging station are being restored. This includes the following basic settings: console type name address type extension buzzer date format user access relay --> Mic delay Mic priority LCD-contrast ON key STOP key PRORAM key GONG key TEXT key SPRECHEN key Page 8 actual measured type or, with erroneous testing, generally DPC 4510 untitled DPC4106 OFF, 1 .. 32 extension port OFF, DPC 4350 extension ON, PTT-microphone, Line ON ON German, English user level 15ms internal microphone, PTT-microphone 0 switches with a delay of 1s local, with priority 50 disabled gong signal 4 in all 100 lines, with priority 80 text 1 in all 100 lines, with priority 20 announcements in all 100 lines, with priority 50 ALARM key OPTION 1 key OPTION 2 key PTT (external) key Test #10 disabled OFF OFF announcements in all 100 lines, with priority 50 SLAVE-Test Pressing the area key 10 or correspondingly using the UP/DOWN keys followed by the TALK key ignites the SLAVE test. The display shows the following message: Slave test running ... Description: A specific pattern is sent to the connected paging station extension DPC4350, which triggers the sequence in which the extension’s key-LED’s are switched on and off. If there is no extension connected or in case of faulty transmission, the display shows the following message. slave test failure ! ! ! Pressing ESC cancels the SLAVE test. Test #11 SPI LOOP test Pressing the area key 11 or correspondingly using the UP/DOWN keys followed by the TALK key ignites the SPI LOOP test. The display shows the following message: spi looptest running ... Description: The TX/RX driver electronic is tested by bridging MOSI (CN4.5) and MISO/PTT (CN4.4) at the EXT-socket. For testing the entire functionality of the SPI-interface, it is necessary to monitor the SLAVE SELECT (CN4.6) and SCK (CN4.3) signals via oscilloscope. In case the test is not completed successfully, the display shows the following message: spi looptest failure ! ! ! Pressing ESC cancels the SPI LOOP test. Test #12 SPI TX test Pressing the area key 12 (only with paging station models DPC4x20, DPC4550) or correspondingly using the UP/DOWN keys followed by the TALK key ignites the SPI TX test. The display shows the following message: spi tx test running ... Page 9 Description: During this test, a test pattern that is generated by the processor is sent via the path PROCESSOR MOSIOUT à SPI driver circuit. Pressing ESC cancels the SPI TX test. Test #13 VCC test Pressing the area key 13 (only with paging station models DPC4x20, DPC4550) or correspondingly using the UP/DOWN keys followed by the TALK key ignites the VCC test. The display shows the following message: vcc test xx.x volts Description: This test measures the supply voltage at the cathode D60. During the test, the ON/OFF, TALK, and ALARM keys allow to set different loads. ON/OFF key TALK key ALARM key switches all LED´s on switches the audio relay on switches the alarm lamp on Pressing ESC cancels the VCC test. Test #14 A/D test Pressing the area key 14 (only with paging station models DPC4x20, DPC4550) or correspondingly using the UP/DOWN keys followed by the TALK key ignites the A/D test. The display shows the following message: A/D test ANx: xx..xx..xxh Description: The A/D-converter inputs AN0 .. AN7 are being tested. Using the Die UP/ DOWN keys lets you switch between channels. All values are displayed in HEX-Code. The three different values that are indicated on the display are as follows: left – minimum value, center – the actually measured value, and right – maximum value. Pressing ESC cancels the A/D test. Test #15 REL->MIC DELAY Pressing the area key 15 (only with paging station models DPC4x20, DPC4550) or correspondingly using the UP/DOWN keys followed by the TALK key lets you set the delay between the pulling of the relay and the actual ‘opening’ of the microphone channel. The display shows the following message: rel->mic delay xx ms Page 10 Description: The pre-set value is 15 ms. This value can be changed in the range of 0 .. 35 ms using the UP/DOWN keys. Pressing ESC exits the menu. Test #16 PAGETYPE EDIT Pressing the area key 16 (only with paging station models DPC4x20, DPC4550) or correspondingly using the UP/DOWN keys followed by the TALK key lets you change the type of the paging console. The display shows the following message: pagetype edit DPC4xx0 Description: In case automatic type-recognition does not function, this menu lets you manually enter the correct consoletype-ID. Pressing ESC exits the menu. Test #17 EEPROM CLEAR (only for internal testing!) Pressing the area key 17 (only with paging station models DPC4x20, DPC4550) or correspondingly using the UP/DOWN keys followed by the TALK key lets you erase the processor’s internal EEPROM. The display shows the following message: eeprom clear press ´talk´ Description: This function erases the processor’s internal EEPROM. Upon pressing the SPRECHEN-key, the display shows the following message: eeprom clear ok. Pressing ESC exits the menu. When booting next time the following message appears on the display: config error setup again You can erase this error message by selecting test #9! Test #18 LED test Pressing the area key 18 (only with paging station models DPC4x20, DPC4550) or correspondingly using the UP/DOWN keys followed by the TALK key ignites the LED test. The display shows the following message: Page 11 led test running ... Description: All LED’s including the lamps of external keys flash in sequence. Pressing ESC exits the menu. Test #19 Reset Pressing the area key 19 (only with paging station models DPC4x20, DPC4550) or correspondingly using the UP/DOWN keys followed by the TALK key ignites a software reset. The following message briefly appears on the display: reset running ... Description: The processor system re-boots (software reset). 4. Input Characteristics (Relay switched, output terminated with 10k) Input: Input Impedance internal microphone (1kHz) 5. 4k7 Sensitivity for Nominal Output Voltage (+6dB) 43mV Output Characteristics (Output terminated with 10k, relay switched, internal microphone – input selected) Measured via NF+ and NF- (PIN 7 and PIN 8) of the RJ 45 socket (CN 3) Output Impedance 390R Page 12 Nominal Output Voltage +6dB 0.5 dB Maximum Amplitude 1.65V Frequency Response 110Hz - 20kHz 6. Output Symmetry (Relay switched, internal microphone – input selected) Measured via R3 of the following test configuration: Input Voltage 30mV 7. Output Voltage >15dB (<150mV) Compressor and Limiter Characteristics (Talk key pressed, internal microphone – input selected, output terminated with 10k) Measured via NF+ and NF- (PIN 7 and PIN 8) of the RJ 45 socket (CN 3) Input Voltage 30mV 30mV + 10dB (100mV) 30mV + 20dB (300mV) Output Voltage 1.2V +/- 0.5dB 1.6V +/- 0.5dB (limiter-processed) 1.6V +/- 0.5dB (limiter-processed) Distortion 0.20% 0.22% - DPC-Series – Input Voltage -80dBu .. -10dBu at the external input PTT/Line, compressor ON/OFF, soldering bridges A and B closed +10 +5 +0 -5 -10 d B u -15 -20 -25 -30 -35 -40 -80 -75 -70 -65 -60 -55 -50 -45 dBu Page 13 -40 -35 -30 -25 -20 -15 -10 DPC-Series – Input Voltage -60dBu .. +10dBu at the external input PTT/Line, compressor ON/OFF, soldering bridges A and B open +10 +5 +0 -5 -10 d B u -15 -20 -25 -30 -35 -40 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 +0 dBu 8. Interference Noise (Interference – Output Voltage) Test Equipment Settings: Wideband Noise Voltage (Measured via bandpass filter 22.4 Hz .. 22.4 kHz with UPM 550 in PEAK mode, weighting filter set to UNW.) Noise Voltage (CCIR 468-3) (Measured via noise filter (psophometric) with UPM 550 in PEAK mode, weighting filter set to CCIR.) Noise Voltgae (A-weighted) (Weighting filter with UPM 550 in RMS mode, weighting filter set to dB(A).) 8.1. Interference Voltages • Service mode #3 selected • Internal input terminated with 47k • External input terminated with 1 k ohm 8.1.1 Internal Microphone Input • Audio switches 1, 3, 4 à ON, 2, 5, 6 à OFF S/N Ratio (unweighted) S/N Ratio (A-weighted) S/N Ratio (CCIR 468-3) 8.1.2.1 External PTT/LINE Input Microphone Sensitivity (with SSM 2165 pre-amplifier) Page 14 600 µV 420 µV 1.9 mV +5 +10 • Audio switches 1, 3, 4 à ON, 2, 5, 6 à OFF • Soldering bridges A & B closed S/N Ratio (unweighted) S/N Ratio (A-weighted) S/N Ratio (CCIR 468-3) 600 µV 420 µV 1.9 mV 8.1.2.2 External PTT/LINE Input Line Sensitivity (with SSM 2165 pre-amplifier) • Audio switches 1, 3, 4 à ON, 2, 5, 6 à OFF • Soldering bridges A & B open S/N Ratio (unweighted) S/N Ratio (A-weighted) S/N Ratio (CCIR 468-3) 230 µV 150 µV 670 µV 8.1.2.3 External PTT/LINE Input Microphone Sensitivity (without SSM 2165 pre-amplifier) • Audio switches 1, 4 à ON 2, 3, 5, 6 à OFF • Soldering bridges A & B closed S/N Ratio (unweighted) S/N Ratio (A-weighted) S/N Ratio (CCIR 468-3) 45 µV 28 µV 120 µV 8.1.2.4 External PTT/LINE Input Line Sensitivity (without SSM 2165 pre-amplifier) • Audio switches 1, 4 à ON, 2, 3, 5, 6 à OFF • Soldering bridges A & B open S/N Ratio (unweighted) S/N Ratio (A-weighted) S/N Ratio (CCIR 468-3) Page 15 30 µV 17 µV 75 µV 8.2. Frequency Response • Service mode #3 selected 8.2.1 Internal Microphone Input DPC-Series – Input Voltage +3dBu, 0dBu, -10dBu, -20dBu, -30dBu, -40dBu, -50dBu at the internal Mic Input Ober 2.2 F capacitor, audio test switches 1, 2 ON; 3, 4, 5, 6 OFF +10 +0 -10 d B u -20 -30 -40 -50 20 50 100 200 500 1k 2k 5k 10k 20k 5k 10k 20k Hz DPC-Series – Input Voltage +3dBu, 0dBu, -10dBu, -20dBu, -30dBu, -40dBu, -50dBu at the internal Mic Input Ober 2.2 F capacitor, audio test switches 1, 2 ON; 3, 4, 5, 6 OFF +10 +0 -10 d B u -20 -30 -40 -50 20 50 100 200 500 1k Hz Page 16 2k 8.2.1 8.2.2 External PTT/LINE Input Microphone Sensitivity (with SSM 2165 pre-amplifier) • Soldering bridges A & B closed DPC-Series – Input Voltage +10dBu, 0dBu, -10dBu, -20dBu, -30dBu, -40dBu, -50dBu at the external Input PTT/Line, audio test switches 1, 3, 4 ON 2, 5, 6 OFF +10 +5 +0 -5 -10 d B u -15 -20 -25 -30 -35 -40 -45 -50 20 50 100 200 500 1k 2k 5k 10k 20k Hz DPC-Series – Input Voltage +3dBu, 0dBu, -10dBu, -20dBu, -30dBu, -40dBu, -50dBu at the internal Mic Input Ober 2.2 F capacitor, audio test switches 1, 2, 5 ON; 3, 4, 6 OFF +10 +0 -10 d B u -20 -30 -40 -50 20 50 100 200 500 1k Hz 8.2.3 External PTT/LINE Input Line Sensitivity (with SSM 2165 pre-amplifier) • Audio switches 1, 3, 4 à ON, 2, 5, 6 à OFF • Soldering bridges A & B open 8.2.4 External PTT/LINE Input Microphone Sensitivity (without SSM 2165 pre-amplifier) • Audio switches 1, 4 à ON 2, 3, 5, 6 à OFF • Soldering bridges A & B closed Page 17 2k 5k 10k 20k 8.2.5 External PTT/LINE Input Line Sensitivity (without SSM 2165 pre-amplifier) • Audio switches 1, 4 à ON, 2, 3, 5, 6 à OFF • Soldering bridges A & B open Page 18 Ersatzteilliste - Bill of Materials Pos. Nr. Ref. No. 121620 Best. Nr. Part No. Bezeichnung Description Zubehör Accessories & packing material BEDIENUNGSANL. DPC-SERIE KABEL-PATCH 3.0 M CAT5-K KRT. MT 2005 290X215X148 FALTEINLAGE LINKS MT 2005 FALTEINLAGE RECHTS MT 2005 FALTEINLAGE DPC 4510 SCHUTZHÜLLE 250X400X0,05 owner's manual cable patch 3.0m carton carton filler left carton filler right carton filler plastic bag Mechanische Teile Cabinet material 349640 354344 355007 349104 351534 354341 354342 354343 342904 353624 353625 355653 355502 355503 353703 352144 KABEL-KONFEKT 16POL 0.180M KABEL-KONFEKT 4POL 0.110M EINLEGEFOLIE DPC 4010 MIKRO ME 151/8X200 WINDSCHUTZ MIKRO FÜR MIKRO SCHALTER-TAST 500 100 SCHUTZKAPPE 461 412 F.TASTE LAMPE 590 000 F. TASTE SCHUTZKAPPE F. LUMOTAST SEITENTEIL LINKS DPC 4550 SEITENTEIL RECHTS DPC 4550 BEZ.STREIFEN NEUTRAL BEZ.STREIFEN "LÖSCHEN" BEZ.STREIFEN "ALLE" FUSS-GUMMI D=12,5 SCHWARZ KNOPF-TASTE GRAU 827 ribbon cable 16-way ribbon cable 4-way front panel mylar microphone ME 151 wind screen switch assy cap switch lamp switch cap switch side wing left side wing right name stripe blank name stripe "löschen" name stripe "alle" foot rubber knob switch gray 804358 PCB--*DPC4010 pcb assy 80435 344863 344863 354599 354599 341937 341937 341937 337394 352307 352307 352307 352307 340522 340524 340524 352305 352306 344077 MESSERLST. 16POL MESSERLST. 16POL BUCHSE-MODULAR 8POL BUCHSE-MODULAR 8POL MESSERLST. 4POL MESSERLST. 4POL MESSERLST. 4POL STIFTLEISTE 4POL STL11-SKO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 35V KO-EL 100.000MF 16V KO-EL 100.000MF 16V KO-EL 1.000MF 50V KO-EL 2.200MF 50V KO-EL 330.000MF 35V connector male 16-pin connector male 16-pin connector female 8-pole connector female 8-pole connector male 4-pin connector male 4-pin connector male 4-pin connector male 4-pin cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/35 cap electrolytic 100uF/16V cap electrolytic 100uF/16V cap electrolytic 1uF/50V cap electrolytic 2.2uF/50V cap electrolytic 330uF/35V 353702 352279 355178 355261 355262 355264 345973 CN001 CN002 CN003 CN004 CN006 CN007 CN008 CN009 C004 C005 C007 C010 C013 C014 C015 C017 C018 C019 DPC 4010 10LINIENTASTEN Pos. Nr. Ref. No. 121620 Best. Nr. Part No. C021 C041 C042 C043 C044 C045 C049 C050 C051 C053 C054 C056 D101 D103 L001 L003 RL001 S001 S002 S003 S004 S005 S006 S007 S008 S009 S010 S011 S012 S013 S014 S015 S016 S017 S018 X001 X002 340522 352306 352306 352307 352307 352307 352307 352307 352307 352307 352307 352307 352129 301276 335966 335966 352141 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352285 352286 DPC 4010 10LINIENTASTEN Bezeichnung Description KO-EL 10.000MF 35V KO-EL 2.200MF 50V KO-EL 2.200MF 50V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V DIODE MUR 120 RL DIODZ BZX 55C 6V2 0.50W DROSSEL 47.00UH/0.45A DROSSEL 47.00UH/0.45A RELAIS TQ 2-5V SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN QUARZ 7.3728MHZ HC-49-US LA PIEZO-SCHALLWANDLER cap electrolytic 10uF/35 cap electrolytic 2.2uF/50V cap electrolytic 2.2uF/50V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V diode mur 120 rl zener diode 6V2 coil 47 uH coil 47 uH relay switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary crystal 7.3728MHZ piezo transducer Ersatzteilliste - Bill of Materials Pos. Nr. Ref. No. Z0020 Z0040 CN001 CN002 CN003 CN004 CN006 CN007 CN008 CN009 C004 C005 C007 C010 C013 C014 C015 C017 C018 C019 C021 121621 Best. Nr. Part No. DPC 4020 20LINIENTASTEN Bezeichnung Description Zubehör Accessories & packing material BEDIENUNGSANL. DPC-SERIE KABEL-PATCH 3.0 M CAT5-K KRT. MT 2005 290X215X148 FALTEINLAGE LINKS MT 2005 FALTEINLAGE RECHTS MT 2005 SCHUTZHÜLLE 250X400X0,05 owner's manual cable patch 3.0m carton carton filler left carton filler right plastic bag Mechanische Teile Cabinet material 349640 354344 355008 349104 351534 354341 354342 354343 342904 353624 353625 355654 355502 355503 353703 352144 KABEL-KONFEKT 16POL 0.180M KABEL-KONFEKT 4POL 0.110M EINLEGEFOLIE DPC 4020 MIKRO ME 151/8X200 WINDSCHUTZ MIKRO FÜR MIKRO SCHALTER-TAST 500 100 SCHUTZKAPPE 461 412 F.TASTE LAMPE 590 000 F. TASTE SCHUTZKAPPE F. LUMOTAST SEITENTEIL LINKS DPC 4550 SEITENTEIL RECHTS DPC 4550 BEZ.STREIFEN NEUTRAL BEZ.STREIFEN "LÖSCHEN" BEZ.STREIFEN "ALLE" FUSS-GUMMI D=12,5 SCHWARZ KNOPF-TASTE GRAU 827 ribbon cable 16-way ribbon cable 4-way front panel mylar microphone ME 151 wind screen switch assy cap switch lamp switch cap switch side wing left side wing right name stripe blank name stripe "löschen" name stripe "alle" foot rubber knob switch gray 804368 PCB--*DPC4020 pcb assy 80436 344863 344863 354599 354599 341937 341937 341937 337394 352307 352307 352307 352307 340522 340524 340524 352305 352306 344077 340522 MESSERLST. 16POL MESSERLST. 16POL BUCHSE-MODULAR 8POL BUCHSE-MODULAR 8POL MESSERLST. 4POL MESSERLST. 4POL MESSERLST. 4POL STIFTLEISTE 4POL STL11-SKO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 35V KO-EL 100.000MF 16V KO-EL 100.000MF 16V KO-EL 1.000MF 50V KO-EL 2.200MF 50V KO-EL 330.000MF 35V KO-EL 10.000MF 35V connector male 16-pin connector male 16-pin connector female 8-pole connector female 8-pole connector male 4-pin connector male 4-pin connector male 4-pin connector male 4-pin cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/35 cap electrolytic 100uF/16V cap electrolytic 100uF/16V cap electrolytic 1uF/50V cap electrolytic 2.2uF/50V cap electrolytic 330uF/35V cap electrolytic 10uF/35 353702 352279 355178 355261 355262 345973 Pos. Nr. Ref. No. 121621 Best. Nr. Part No. C041 C042 C043 C044 C045 C049 C050 C051 C053 C054 C056 D101 D103 L001 L003 RL001 S001 S002 S003 S004 S005 S006 S007 S008 S009 S010 S011 S012 S013 S014 S015 S016 S017 S018 S019 S020 S021 S022 S023 S024 S025 S026 S027 S028 X001 X002 352306 352306 352307 352307 352307 352307 352307 352307 352307 352307 352307 352129 301276 335966 335966 352141 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352285 352286 DPC 4020 20LINIENTASTEN Bezeichnung Description KO-EL 2.200MF 50V KO-EL 2.200MF 50V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V DIODE MUR 120 RL DIODZ BZX 55C 6V2 0.50W DROSSEL 47.00UH/0.45A DROSSEL 47.00UH/0.45A RELAIS TQ 2-5V SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN QUARZ 7.3728MHZ HC-49-US LA PIEZO-SCHALLWANDLER cap electrolytic 2.2uF/50V cap electrolytic 2.2uF/50V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V diode mur 120 rl zener diode 6V2 coil 47 uH coil 47 uH relay switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary crystal 7.3728MHZ piezo transducer Ersatzteilliste - Bill of Materials Pos. Nr. Ref. No. Z0020 Z0040 CN001 CN002 CN003 CN004 CN005 CN006 CN007 CN008 CN009 C004 C005 C007 C010 C013 C014 C015 C017 C018 C019 C021 C035 C037 C041 C042 121762 Best. Nr. Part No. DPC 4106 6KONTROLLTASTEN Bezeichnung Description Zubehör Accessories & packing material BEDIENUNGSANL. DPC-SERIE KABEL-PATCH 3.0 M CAT5-K KRT. MT 2005 290X215X148 FALTEINLAGE LINKS MT 2005 FALTEINLAGE RECHTS MT 2005 FALTEINLAGE DPC 4510 SCHUTZHÜLLE 250X400X0,05 owner's manual cable patch 3.0m carton carton filler left carton filler right carton filler plastic bag Mechanische Teile Cabinet material 349640 352361 358107 349104 351534 353624 353625 355502 355503 353703 KABEL-KONFEKT 16POL 0.180M DISPLAY LCD BEARB. AUS EINLEGEFOLIE DPC 4106 MIKRO ME 151/8X200 WINDSCHUTZ MIKRO FÜR MIKRO SEITENTEIL LINKS DPC 4550 SEITENTEIL RECHTS DPC 4550 BEZ.STREIFEN "LÖSCHEN" BEZ.STREIFEN "ALLE" FUSS-GUMMI D=12,5 SCHWARZ ribbon cable 16-way lcd display front panel mylar microphone ME 151 wind screen side wing left side wing right name stripe "löschen" name stripe "alle" foot rubber 804628 PCB--*DPC4106 pcb assy 80462 344863 344863 354599 354599 352308 341937 341937 341937 337394 352307 352307 352307 352307 340522 340524 340524 352305 352306 344077 340522 352307 340521 352306 352306 MESSERLST. 16POL MESSERLST. 16POL BUCHSE-MODULAR 8POL BUCHSE-MODULAR 8POL BUCHSENLEISTE 14POL MESSERLST. 4POL MESSERLST. 4POL MESSERLST. 4POL STIFTLEISTE 4POL STL11-SKO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 35V KO-EL 100.000MF 16V KO-EL 100.000MF 16V KO-EL 1.000MF 50V KO-EL 2.200MF 50V KO-EL 330.000MF 35V KO-EL 10.000MF 35V KO-EL 10.000MF 16V KO-EL 2.200MF 50V KO-EL 2.200MF 50V KO-EL 2.200MF 50V connector male 16-pin connector male 16-pin connector female 8-pole connector female 8-pole connector female 14-pole connector male 4-pin connector male 4-pin connector male 4-pin connector male 4-pin cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/35 cap electrolytic 100uF/16V cap electrolytic 100uF/16V cap electrolytic 1uF/50V cap electrolytic 2.2uF/50V cap electrolytic 330uF/35V cap electrolytic 10uF/35 cap electrolytic 10uF/16V cap electrolytic 2.2uF/50V cap electrolytic 2.2uF/50V cap electrolytic 2.2uF/50V 353702 352279 355178 355261 355262 355264 345973 Pos. Nr. Ref. No. 121762 Best. Nr. Part No. C043 C044 C045 C049 C050 C051 C053 C054 C056 D101 D103 L001 L003 RL001 S001 S002 S003 S004 S005 S006 X001 X002 0020 352307 352307 352307 352307 352307 352307 352307 352307 352307 352129 301276 335966 335966 352141 352143 352143 352143 352143 352143 352143 352285 352286 352144 DPC 4106 6KONTROLLTASTEN Bezeichnung Description KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V DIODE MUR 120 RL DIODZ BZX 55C 6V2 0.50W DROSSEL 47.00UH/0.45A DROSSEL 47.00UH/0.45A RELAIS TQ 2-5V SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN QUARZ 7.3728MHZ HC-49-US LA PIEZO-SCHALLWANDLER KNOPF-TASTE GRAU 827 cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V diode mur 120 rl zener diode 6V2 coil 47 uH coil 47 uH relay switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary crystal 7.3728MHZ piezo transducer knob switch gray Ersatzteilliste - Bill of Materials Pos. Nr. Ref. No. Z0040 CN001 CN002 CN004 C013 C014 C015 C017 D101 D103 L001 S001 S002 S003 S004 S005 S006 S007 S008 S009 S010 S011 S012 S013 S014 S015 S016 S017 S018 S019 121626 Best. Nr. Part No. DPC 4350 50LINIENT.ERWEIT. Bezeichnung Description Zubehör Accessories & packing material KABEL-PATCH 0.5 M CAT5-K KRT. DPC 4550 427X215X148 FALTEINLAGE LINKS MT 2005 FALTEINLAGE RECHTS MT 2005 FALTEINLAGE MT 2005 SCHUTZHÜLLE 250X400X0,05 cable patch 0.5m carton carton filler left carton filler right carton filler plastic bag Mechanische Teile Cabinet material 346164 353706 353624 353625 355655 353703 KABEL-KONFEKT 8POL 0.105M EINLEGEFOLIE DPC 4350 SEITENTEIL LINKS DPC 4550 SEITENTEIL RECHTS DPC 4550 BEZ.STREIFEN NEUTRAL FUSS-GUMMI D=12,5 SCHWARZ ribbon cable 8-way front panel mylar side wing left side wing right name stripe blank foot rubber 804348 PCB--*DPC4350 pcb assy 80434 344862 344862 354599 340522 340524 340524 340522 352129 301276 335966 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 MESSERLST. 8POL MESSERLST. 8POL BUCHSE-MODULAR 8POL KO-EL 10.000MF 35V KO-EL 100.000MF 16V KO-EL 100.000MF 16V KO-EL 10.000MF 35V DIODE MUR 120 RL DIODZ BZX 55C 6V2 0.50W DROSSEL 47.00UH/0.45A SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN connector male 8-pin connector male 8-pin connector female 8-pole cap electrolytic 10uF/35 cap electrolytic 100uF/16V cap electrolytic 100uF/16V cap electrolytic 10uF/35 diode mur 120 rl zener diode 6V2 coil 47 uH switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary 352280 355260 355261 355262 355265 345973 121626 Best. Nr. Part No. DPC 4350 50LINIENT.ERWEIT. Pos. Nr. Ref. No. Bezeichnung Description S020 S021 S022 S023 S024 S025 S026 S027 S028 S029 S030 S031 S032 S033 S034 S035 S036 S037 S038 S039 S040 S041 S042 S043 S044 S045 S046 S047 S048 S049 S050 X001 0020 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352285 352144 SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN QUARZ 7.3728MHZ HC-49-US KNOPF-TASTE GRAU 827 switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary crystal 7.3728MHZ knob switch gray Ersatzteilliste - Bill of Materials Pos. Nr. Ref. No. Z0020 Z0040 CN001 CN002 CN003 CN004 CN005 CN006 CN007 CN008 CN009 C004 C005 C007 C010 C013 C014 C015 C017 121623 Best. Nr. Part No. DPC 4510 10LINIENT.+LCD Bezeichnung Description Zubehör Accessories & packing material BEDIENUNGSANL. DPC-SERIE KABEL-PATCH 3.0 M CAT5-K KRT. MT 2005 290X215X148 FALTEINLAGE LINKS MT 2005 FALTEINLAGE RECHTS MT 2005 FALTEINLAGE DPC 4510 SCHUTZHÜLLE 250X400X0,05 owner's manual cable patch 3.0m carton carton filler left carton filler right carton filler plastic bag Mechanische Teile Cabinet material 349640 354344 352361 353623 349104 351534 354341 354342 354343 342904 353624 353625 355653 355502 355503 353703 352144 KABEL-KONFEKT 16POL 0.180M KABEL-KONFEKT 4POL 0.110M DISPLAY LCD BEARB. AUS EINLEGEFOLIE DPC 4510 MIKRO ME 151/8X200 WINDSCHUTZ MIKRO FÜR MIKRO SCHALTER-TAST 500 100 SCHUTZKAPPE 461 412 F.TASTE LAMPE 590 000 F. TASTE SCHUTZKAPPE F. LUMOTAST SEITENTEIL LINKS DPC 4550 SEITENTEIL RECHTS DPC 4550 BEZ.STREIFEN NEUTRAL BEZ.STREIFEN "LÖSCHEN" BEZ.STREIFEN "ALLE" FUSS-GUMMI D=12,5 SCHWARZ KNOPF-TASTE GRAU 827 ribbon cable 16-way ribbon cable 4-way lcd display front panel mylar microphone ME 151 wind screen switch assy cap switch lamp switch cap switch side wing left side wing right name stripe blank name stripe "löschen" name stripe "alle" foot rubber knob switch gray 804318 PCB--*DPC4510 pcb assy 80431 344863 344863 354599 354599 352308 341937 341937 341937 337394 352307 352307 352307 352307 340522 340524 340524 352305 MESSERLST. 16POL MESSERLST. 16POL BUCHSE-MODULAR 8POL BUCHSE-MODULAR 8POL BUCHSENLEISTE 14POL MESSERLST. 4POL MESSERLST. 4POL MESSERLST. 4POL STIFTLEISTE 4POL STL11-SKO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 35V KO-EL 100.000MF 16V KO-EL 100.000MF 16V KO-EL 1.000MF 50V connector male 16-pin connector male 16-pin connector female 8-pole connector female 8-pole connector female 14-pole connector male 4-pin connector male 4-pin connector male 4-pin connector male 4-pin cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/35 cap electrolytic 100uF/16V cap electrolytic 100uF/16V cap electrolytic 1uF/50V 353702 352279 355178 355261 355262 355264 345973 Pos. Nr. Ref. No. 121623 Best. Nr. Part No. C018 C019 C021 C035 C037 C041 C042 C043 C044 C045 C049 C050 C051 C053 C054 C056 D101 D103 L001 L003 RL001 S001 S002 S003 S004 S005 S006 S007 S008 S009 S010 S011 S012 S013 S014 S015 S016 S017 S018 X001 X002 352306 344077 340522 352307 340521 352306 352306 352307 352307 352307 352307 352307 352307 352307 352307 352307 352129 301276 335966 335966 352141 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352285 352286 DPC 4510 10LINIENT.+LCD Bezeichnung Description KO-EL 2.200MF 50V KO-EL 330.000MF 35V KO-EL 10.000MF 35V KO-EL 10.000MF 16V KO-EL 2.200MF 50V KO-EL 2.200MF 50V KO-EL 2.200MF 50V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V DIODE MUR 120 RL DIODZ BZX 55C 6V2 0.50W DROSSEL 47.00UH/0.45A DROSSEL 47.00UH/0.45A RELAIS TQ 2-5V SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN QUARZ 7.3728MHZ HC-49-US LA PIEZO-SCHALLWANDLER cap electrolytic 2.2uF/50V cap electrolytic 330uF/35V cap electrolytic 10uF/35 cap electrolytic 10uF/16V cap electrolytic 2.2uF/50V cap electrolytic 2.2uF/50V cap electrolytic 2.2uF/50V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V diode mur 120 rl zener diode 6V2 coil 47 uH coil 47 uH relay switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary crystal 7.3728MHZ piezo transducer Ersatzteilliste - Bill of Materials Pos. Nr. Ref. No. Z0020 Z0040 CN001 CN002 CN003 CN004 CN005 CN006 CN007 CN008 CN009 C004 C005 C007 C010 C013 C014 C015 C017 C018 121624 Best. Nr. Part No. DPC 4520 20LINIENT.+LCD Bezeichnung Description Zubehör Accessories & packing material BEDIENUNGSANL. DPC-SERIE KABEL-PATCH 3.0 M CAT5-K KRT. MT 2005 290X215X148 FALTEINLAGE LINKS MT 2005 FALTEINLAGE RECHTS MT 2005 SCHUTZHÜLLE 250X400X0,05 owner's manual cable patch 3.0m carton carton filler left carton filler right plastic bag Mechanische Teile Cabinet material 349640 354344 352361 353622 349104 351534 354341 354342 354343 342904 353624 353625 355654 355502 355503 353703 352144 KABEL-KONFEKT 16POL 0.180M KABEL-KONFEKT 4POL 0.110M DISPLAY LCD BEARB. AUS EINLEGEFOLIE DPC 4520 MIKRO ME 151/8X200 WINDSCHUTZ MIKRO FÜR MIKRO SCHALTER-TAST 500 100 SCHUTZKAPPE 461 412 F.TASTE LAMPE 590 000 F. TASTE SCHUTZKAPPE F. LUMOTAST SEITENTEIL LINKS DPC 4550 SEITENTEIL RECHTS DPC 4550 BEZ.STREIFEN NEUTRAL BEZ.STREIFEN "LÖSCHEN" BEZ.STREIFEN "ALLE" FUSS-GUMMI D=12,5 SCHWARZ KNOPF-TASTE GRAU 827 ribbon cable 16-way ribbon cable 4-way lcd display front panel mylar dpc4520 microphone ME 151 wind screen switch assy cap switch lamp switch cap switch side wing left side wing right name stripe blank name stripe "löschen" name stripe "alle" foot rubber knob switch gray 804328 PCB--*DPC4520 pcb assy 80432 344863 344863 354599 354599 352308 341937 341937 341937 337394 352307 352307 352307 352307 340522 340524 340524 352305 352306 MESSERLST. 16POL MESSERLST. 16POL BUCHSE-MODULAR 8POL BUCHSE-MODULAR 8POL BUCHSENLEISTE 14POL MESSERLST. 4POL MESSERLST. 4POL MESSERLST. 4POL STIFTLEISTE 4POL STL11-SKO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 35V KO-EL 100.000MF 16V KO-EL 100.000MF 16V KO-EL 1.000MF 50V KO-EL 2.200MF 50V connector male 16-pin connector male 16-pin connector female 8-pole connector female 8-pole connector female 14-pole connector male 4-pin connector male 4-pin connector male 4-pin connector male 4-pin cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/35 cap electrolytic 100uF/16V cap electrolytic 100uF/16V cap electrolytic 1uF/50V cap electrolytic 2.2uF/50V 353702 352279 355178 355261 355262 345973 Pos. Nr. Ref. No. C019 C021 C035 C037 C041 C042 C043 C044 C045 C049 C050 C051 C053 C054 C056 D101 D103 L001 L003 RL001 S001 S002 S003 S004 S005 S006 S007 S008 S009 S010 S011 S012 S013 S014 S015 S016 S017 S018 S019 S020 S021 S022 S023 S024 S025 S026 S027 S028 X001 X002 121624 Best. Nr. Part No. DPC 4520 20LINIENT.+LCD Bezeichnung Description 344077 340522 352307 340521 352306 352306 352307 352307 352307 352307 352307 352307 352307 352307 352307 352129 301276 335966 335966 352141 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352285 352286 KO-EL 330.000MF 35V KO-EL 10.000MF 35V KO-EL 10.000MF 16V KO-EL 2.200MF 50V KO-EL 2.200MF 50V KO-EL 2.200MF 50V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V DIODE MUR 120 RL DIODZ BZX 55C 6V2 0.50W DROSSEL 47.00UH/0.45A DROSSEL 47.00UH/0.45A RELAIS TQ 2-5V SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN QUARZ 7.3728MHZ HC-49-US LA PIEZO-SCHALLWANDLER cap electrolytic 330uF/35V cap electrolytic 10uF/35 cap electrolytic 10uF/16V cap electrolytic 2.2uF/50V cap electrolytic 2.2uF/50V cap electrolytic 2.2uF/50V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V diode mur 120 rl zener diode 6V2 coil 47 uH coil 47 uH relay switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary crystal 7.3728MHZ piezo transducer Ersatzteilliste - Bill of Materials Pos. Nr. Ref. No. Z0020 Z0040 CN001 CN002 CN003 CN004 CN005 CN006 CN007 CN008 CN009 C004 C005 C007 C010 C013 C014 C015 C017 C018 121622 Best. Nr. Part No. DPC 4530 30LINIENT.+LCD Bezeichnung Description Zubehör Accessories & packing material BEDIENUNGSANL. DPC-SERIE KABEL-PATCH 3.0 M CAT5-K KRT. DPC 4550 427X215X148 FALTEINLAGE LINKS MT 2005 FALTEINLAGE RECHTS MT 2005 FALTEINLAGE DPC 4510 SCHUTZHÜLLE 250X400X0,05 owner's manual cable patch 3.0m carton carton filler left carton filler right carton filler plastic bag Mechanische Teile Cabinet material 349640 354344 352361 349104 351534 354341 354342 354343 342904 353624 353625 356324 355502 355503 353703 352144 KABEL-KONFEKT 16POL 0.180M KABEL-KONFEKT 4POL 0.110M DISPLAY LCD BEARB. AUS MIKRO ME 151/8X200 WINDSCHUTZ MIKRO FÜR MIKRO SCHALTER-TAST 500 100 SCHUTZKAPPE 461 412 F.TASTE LAMPE 590 000 F. TASTE SCHUTZKAPPE F. LUMOTAST SEITENTEIL LINKS DPC 4550 SEITENTEIL RECHTS DPC 4550 BEZ.STREIFEN NEUTRAL BEZ.STREIFEN "LÖSCHEN" BEZ.STREIFEN "ALLE" FUSS-GUMMI D=12,5 SCHWARZ KNOPF-TASTE GRAU 827 ribbon cable 16-way ribbon cable 4-way lcd display microphone ME 151 wind screen switch assy cap switch lamp switch cap switch side wing left side wing right name stripe blank name stripe "löschen" name stripe "alle" foot rubber knob switch gray 804558 PCB--*DPC4530 pcb assy 80455 344863 344863 354599 354599 352308 341937 341937 341937 337394 352307 352307 352307 352307 340522 340524 340524 352305 352306 MESSERLST. 16POL MESSERLST. 16POL BUCHSE-MODULAR 8POL BUCHSE-MODULAR 8POL BUCHSENLEISTE 14POL MESSERLST. 4POL MESSERLST. 4POL MESSERLST. 4POL STIFTLEISTE 4POL STL11-SKO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 35V KO-EL 100.000MF 16V KO-EL 100.000MF 16V KO-EL 1.000MF 50V KO-EL 2.200MF 50V connector male 16-pin connector male 16-pin connector female 8-pole connector female 8-pole connector female 14-pole connector male 4-pin connector male 4-pin connector male 4-pin connector male 4-pin cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/35 cap electrolytic 100uF/16V cap electrolytic 100uF/16V cap electrolytic 1uF/50V cap electrolytic 2.2uF/50V 353702 352279 355260 355261 355262 355264 345973 Pos. Nr. Ref. No. 121622 Best. Nr. Part No. C019 C021 C035 C037 C041 C042 C043 C044 C045 C049 C050 C051 C053 C054 C056 D101 D103 L001 L003 RL001 S001 S002 S003 S004 S005 S006 S007 S008 S009 S010 S011 S012 S013 S014 S015 S016 S017 S018 S019 S020 S021 S022 S023 S024 S025 S026 S027 S028 S029 S030 S031 S032 344077 340522 352307 340521 352306 352306 352307 352307 352307 352307 352307 352307 352307 352307 352307 352129 301276 335966 335966 352141 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 DPC 4530 30LINIENT.+LCD Bezeichnung Description KO-EL 330.000MF 35V KO-EL 10.000MF 35V KO-EL 10.000MF 16V KO-EL 2.200MF 50V KO-EL 2.200MF 50V KO-EL 2.200MF 50V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V DIODE MUR 120 RL DIODZ BZX 55C 6V2 0.50W DROSSEL 47.00UH/0.45A DROSSEL 47.00UH/0.45A RELAIS TQ 2-5V SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN cap electrolytic 330uF/35V cap electrolytic 10uF/35 cap electrolytic 10uF/16V cap electrolytic 2.2uF/50V cap electrolytic 2.2uF/50V cap electrolytic 2.2uF/50V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V diode mur 120 rl zener diode 6V2 coil 47 uH coil 47 uH relay switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary Pos. Nr. Ref. No. 121622 Best. Nr. Part No. S033 S034 S035 S036 S037 S038 X001 X002 352143 352143 352143 352143 352143 352143 352285 352286 DPC 4530 30LINIENT.+LCD Bezeichnung Description SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN QUARZ 7.3728MHZ HC-49-US LA PIEZO-SCHALLWANDLER switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary crystal 7.3728MHZ piezo transducer Ersatzteilliste - Bill of Materials Pos. Nr. Ref. No. Z0020 Z0040 CN001 CN002 CN003 CN004 CN005 CN006 CN007 CN008 CN009 C004 C005 C007 C010 C013 C014 C015 C017 C018 C019 C021 121625 Best. Nr. Part No. 353702 352279 355260 355261 355262 345973 DPC 4550 50LINIENT.+LCD Bezeichnung Description BEDIENUNGSANL. DPC-SERIE KABEL-PATCH 3.0 M CAT5-K KRT. DPC 4550 427X215X148 FALTEINLAGE LINKS MT 2005 FALTEINLAGE RECHTS MT 2005 SCHUTZHÜLLE 250X400X0,05 owner's manual cable patch 3.0m carton carton filler left carton filler right plastic bag Mechanische Teile Cabinet material 349640 354344 352361 353621 349104 351534 354341 354342 354343 342904 353624 353625 355655 355502 355503 353703 352144 KABEL-KONFEKT 16POL 0.180M ribbon cable 16-way KABEL-KONFEKT 4POL 0.110M ribbon cable 4-way DISPLAY LCD BEARB. AUS lcd display EINLEGEFOLIE DPC 4550 front panel mylar dpc4550 MIKRO ME 151/8X200 microphone ME 151 WINDSCHUTZ MIKRO FÜR MIKRO wind screen SCHALTER-TAST 500 100 switch assy SCHUTZKAPPE 461 412 F.TASTE cap switch LAMPE 590 000 F. TASTE lamp switch SCHUTZKAPPE F. LUMOTAST cap switch SEITENTEIL LINKS DPC 4550 side wing left SEITENTEIL RECHTS DPC 4550 side wing right BEZ.STREIFEN NEUTRAL name stripe blank BEZ.STREIFEN "LÖSCHEN" name stripe "löschen" BEZ.STREIFEN "ALLE" name stripe "alle" FUSS-GUMMI D=12,5 SCHWARZ foot rubber KNOPF-TASTE GRAU 827 knob switch gray 804338 PCB--*DPC4550 pcb assy 80433 344863 344863 354599 354599 352308 341937 341937 341937 337394 352307 352307 352307 352307 340522 340524 340524 352305 352306 344077 340522 MESSERLST. 16POL MESSERLST. 16POL BUCHSE-MODULAR 8POL BUCHSE-MODULAR 8POL BUCHSENLEISTE 14POL MESSERLST. 4POL MESSERLST. 4POL MESSERLST. 4POL STIFTLEISTE 4POL STL11-SKO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 35V KO-EL 100.000MF 16V KO-EL 100.000MF 16V KO-EL 1.000MF 50V KO-EL 2.200MF 50V KO-EL 330.000MF 35V KO-EL 10.000MF 35V connector male 16-pin connector male 16-pin connector female 8-pole connector female 8-pole connector female 14-pole connector male 4-pin connector male 4-pin connector male 4-pin connector male 4-pin cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/35 cap electrolytic 100uF/16V cap electrolytic 100uF/16V cap electrolytic 1uF/50V cap electrolytic 2.2uF/50V cap electrolytic 330uF/35V cap electrolytic 10uF/35 Pos. Nr. Ref. No. 121625 Best. Nr. Part No. C035 C037 C041 C042 C043 C044 C045 C049 C050 C051 C053 C054 C056 D101 D103 L001 L003 RL001 S001 S002 S003 S004 S005 S006 S007 S008 S009 S010 S011 S012 S013 S014 S015 S016 S017 S018 S019 S020 S021 S022 S023 S024 S025 S026 S027 S028 S029 S030 S031 S032 S033 S034 352307 340521 352306 352306 352307 352307 352307 352307 352307 352307 352307 352307 352307 352129 301276 335966 335966 352141 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 DPC 4550 50LINIENT.+LCD Bezeichnung Description KO-EL 10.000MF 16V KO-EL 2.200MF 50V KO-EL 2.200MF 50V KO-EL 2.200MF 50V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V KO-EL 10.000MF 16V DIODE MUR 120 RL DIODZ BZX 55C 6V2 0.50W DROSSEL 47.00UH/0.45A DROSSEL 47.00UH/0.45A RELAIS TQ 2-5V SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN cap electrolytic 10uF/16V cap electrolytic 2.2uF/50V cap electrolytic 2.2uF/50V cap electrolytic 2.2uF/50V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V cap electrolytic 10uF/16V diode mur 120 rl zener diode 6V2 coil 47 uH coil 47 uH relay switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary Pos. Nr. Ref. No. 121625 Best. Nr. Part No. S035 S036 S037 S038 S039 S040 S041 S042 S043 S044 S045 S046 S047 S048 S049 S050 S051 S052 S053 S054 S055 S056 S057 S058 X001 X002 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352143 352285 352286 DPC 4550 50LINIENT.+LCD Bezeichnung Description SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN SCHALTER-TAST 1XEIN QUARZ 7.3728MHZ HC-49-US LA PIEZO-SCHALLWANDLER switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary switch 1p momentary crystal 7.3728MHZ piezo transducer