Download VIO 300 D

5 • Working with the Electrosurgical Unit: a Tutorial
Fig. 5-36
In the program 3a ReMode you will see the settings of the monopolar receptacle of
this program. The footswitch (CUT and COAG) is allocated to the monopolar receptacle.
If you switch to the program 3b ReMode, you will see the settings of the bipolar receptacle. The footswitch (CUT and COAG) is allocated to the bipolar receptacle.
By switching between the programs you have changed the allocation of the footswitch to the receptacles! In the program 3b ReMode you can activate the modes of
the bipolar receptacle with the footswitch.
Calling up Setup
In Setup you can for example adjust the unit to the light conditions in the room. Call
up the window Guide. Call up the menu item Additional Functions. Call up the
menu item Setup.
Use a selection button to select a Setup setting. Change the setting with the Up /
Down buttons. Press the Enter button to confirm the changed setting.
62 / 166
80104-521
06/ 2009
Fig. 5-37