Download Do not lower the - Manuale de reparatie si tutoriale / Service

7-12 ENGINE LUBRICATION SYSTEM
Oil Pressure Measurement
Oil Pressure Measurement
the lower fairing (see Lower Fairing Removal in
• Remove
the Frame chapter).
the oil plug, and attach the adapter [B] and gauge
• Remove
[A] to the plug hole.
Special Tools - Oil Pressure Gauge, 10 kgf/cm²: 57001-164
Oil Pressure Gauge Adapter, M18 × 1.5:
57001-1278
the engine and warm up the engine.
• Start
Run
the
at the specified speed, and read the oil
• pressureengine
gauge.
If the oil pressure is much lower than the standard, check
the oil pump and oil pump relief valve.
If the reading is much higher than the standard, check the
oil passages for clogging.
Oil Pressure
Standard: 98 ∼ 147 kPa (1.0 ∼ 1.5 kgf/cm², 14 ∼ 21 psi)
@ 4 000 r/min (rpm), oil temperature 90°C
(194°F)
the engine.
• Stop
Remove
the oil pressure gauge and adapter.
•
WARNING
Take care against burns form hot engine oil that
will drain through the oil passage when the gauge
adapter is removed.