Download 80E02 User Manual

Cleaning the module
WARNING. To prevent injury, power off the instrument and remove the
module before performing any cleaning.
Clean the exterior surfaces of the module with a dry lint-free cloth
or a soft-bristle brush. If any dirt remains, use a damp cloth or swab
dipped in a 75% isopropyl alcohol solution. Use a swab to clean narrow
spaces around controls and connectors. Do not allow moisture inside
the module. Do not use abrasive compounds on any part of the chassis
that may damage the chassis.
Do not open the module case. There are no user serviceable components
inside the module and cleaning the interior is not required.
CAUTION. To prevent damage, avoid the use of chemical cleaning agents
which might damage the plastics in this instrument. Use a 75% isopropyl
alcohol solution as a cleaner and wipe with deionized water. Use only
deionized water when cleaning the menu buttons or front-panel buttons.
Before using any other type of cleaner, consult your Tektronix Service
Center or representative.
80C00, 80E00 Sampling Modules User Manual
13