Download Fluke 190-062

Using The Recorder Functions
Plotting Measurements Over Time (TrendPlot™)
Note
When simultaneously TrendPlotting two readings,
the screen area is split into two sections of four
divisions each. When simultaneously
TrendPlotting three or four readings, the screen
area is split into three or four sections of two
divisions each.
2
When the test tool is in automatic mode, automatic vertical
scaling is used to fit the TrendPlot graph on the screen.
5
F1
Set RECORDER to STOP to freeze
the recorder function.
6
F1
Set RECORDER to RUN to restart.
Note
Scope TrendPlot is not possible on cursor related
measurements. As an alternative you may use
FlukeView logging of readings.
Figure 20. TrendPlot Reading
43