1
Download Phaser 6200 Color Laser Printer
Transcript
Some print-quality problems can be associated with specific assemblies, the most common problems and the associated assemblies are listed below. Also, refer to the specific print-quality troubleshooting procedure for more information. ■ Imaging Unit ■ Streaks ■ Fine Lines ■ Banding ■ Uneven in Process Direction Density ■ Voids ■ Repeating ■ Transfer Defects Roller ■ Toner on the back side of the printed page (simplex mode) ■ Light Prints ■ Repeating Defects ■ Fuser ■ Hot or Cold Offsetting ■ Repeating Defects Repeating Defects Identification Chart FRU Component Imaging Unit Developer Roller [YMCK] 28 mm (1.10 in.) Drum [YMCK] 62 mm (2.44 in.) Drum Charge Rollers Distance between Defects 25 mm (1 in.) IDT 1 (Y and M, C and K) 132 mm (5.20 in.) IDT 2 all colors together 132 mm (5.20 in.) Transfer Roller Transfer Roller 64 mm (2.52 in.) Fuser Assembly Fuser Assembly 82 mm (3.23 in.) Troubleshooting 95
