Download Ventura - TOC.CHP - Veterinary Technics

&/2%7/2$
This manual is intended to provide the information needed for proper operation of the Datascope
MULTINEX and GAS MODULE.
General knowledge of monitoring and an understanding of the features and functions of the
Datascope MULTINEX / GAS MODULE are prerequisites for its proper use.
DO NOT OPERATE THIS MONITOR BEFORE READING THESE INSTRUCTIONS.
Information for servicing this instrument is contained in the Datascope MULTINEX / Gas
Module Service Manual, Part No. 0070-00-0369. For additional information or assistance, please
contact an authorized Datascope representative in your area.
Federal Law restricts this device to sale by or on the order of a physician or other practitioner
licensed by state law to use or order the use of this device.
For external communication protocol see Service Manual Supplement: P/N 0070-00-0305,
MULTINEX Communication Protocol.
NOTE: In order to ensure the proper performance of your monitoring equipment and to prevent
the voiding of the warranty, it is recommended that only parts and accessories provided by
Datascope be used with your monitor.
3!&%49 #/.3)$%2!4)/.3
Please read and adhere to the following safety considerations regarding the use of this instrument.
7!2.).'3
Possible Explosion Hazard - This instrument is not explosion proof and should not be used in the
presence of flammable anesthetics.
Internal Electrical Shock Hazard - This unit does not contain any user-serviceable parts. Do not
remove instrument covers. Refer servicing to qualified personnel.
Trace Gas Hazard - A health hazard may exist when trace amounts of vaporized anesthetic agents are
chronically inspired by operating room personnel. (See Appendix A in NFPA 56A on Inhalation
Anesthetics.) During any procedure where such agents are employed, the MULTINEX / Gas Module
exhaust output should be connected to a medical gas-scavenging system.
Do not operate this monitor if: some or all of the displays fail to function properly, or the CRT
message "FAN FAILURE" occurs.
Insure that the total combined leakage currents do not exceed safe limits.
DO NOT change the voltage selector.
Use only MULTINEX / Gas Module software cartridges in this unit.
MULTINEX / Gas Module
Operating Instructions
v