Download CF-19KDRAXCM

Transcript
7.
8.
9.
10.
11.
Disconnect the Cable from Connector (CN18).
Remove the Keyboard.
Remove the TP Tape.
Disconnect the Cable from Connector (CN800).
Remove the Touch Pad and Click Button Plate.
1
Screws <N1> : DFHE5025XA
Screws <N9> : DRSB2+5FKL
2
9.1.5.
Removing the DIMM Lid Ass’y
<K14-8>
<K14-8>
<K14-8>
<K14-8>
Keyboard
DIMM Lid Ass’y
4. Lift the far side of the Keyboard and slide it to backward,
and then turn the Keyboard over frontward.
<N1>
KBD
Connector
Cover
1. Remove the 4 Screws <K14-8>.
2. Remove the DIMM Lid Ass'y.
Screws <K14-8> : DRHM5025YAT
9.1.6.
Removing the Rear Cabinet
<N10>
<N10>
5. Remove the 3 Screws <N1>.
6. Remove the KBD Connector Cover.
<N10>
<N10>
<N10>
<N10>
<N10>
Keyboard
<N10>
<N10>
Keyboard
FPC
TP Tape
<N10>
Touch Pad
Click Button
Plate
1. Remove the 13 Screws <N10>.
2. Open the LID Rubbers.
3. Remove the Rear Cabinet.
Screws <N10> : DRHM0061ZA
Connector
(CN800)
Connector
(CN18)
9-3
<N10>
<N10>
<N10>