Download CF-19KDRAXCM

Assembly of Main Unit
S1:Insulation S2:Bitten S3:Sharp Edge
S4:Part No. Check S5:Other
CAUTION
Audio FPC Ass'y
Audio FPC
Audio FPC Ass'y
Attach to the
center of FPC
in upper and
lower direction.
±3mm
㽲
Insert before setting
the Main Board.
Tape
Fold
back.
0~1mm
Insert
Insert and then lock.
Stiffening
Plate Side
㽴
㽳
㽵
Thermal Sheet
Apply the lubricant (sub material) on the
HDD Connector for about 1 second.
㽳
㽲
(Note for spraying around when applying.)
㽶
㽹
Thermal Sheet
㽷
Attach to the
center of Module.
Round
to make
the brown
side outside and
insert the notch.
㽸
S4
Attach to the DIMM
(2nd) socket.
* No need to attach for
the Camera model.
Wireless Module
DIMM EMI Sheet
Places of tighten a screws
Screw (N9)
8 Places
Screw (N19)
2 Places
Insert and then lock.
Torque of tightening screw (N9):0.2r0.02N࡮m(ѳ2.0r0.2kgf࡮cm)
Attach the LAN/Modem Holder.
LAN/Modem
Holder
Diagonal view
HDD CON Guide
Slide the hook under
the Main Board.
㽲
㽳
㽳
㽲
㽴
Pass the Cable through
the cavity part of Holder.
㶎 Note
S2
Avoid catching
between the connector and
Holder or running over the top.
SD PCB Ass'y
Insert the FPC into the Main Board.
㽶
㽵
Ensure that the Knob is fit to SW when attaching.
DIMM Holder Ass'y
RF SW Knob
Places of tighten a screws
Screw (N8)
2 Places
Screw (N19)
5 Places
䉿䊜䉕ᝌ౉
DIMM Holder
9-25