Download NV-DV2000EC

3.1.3. Assemble/ Disassemble Procedures of Slot-in Unit
3.1.3.1. Disassemble Section
Before proceeding the disassembling of the Slot-in unit, remove the mechanism unit from the chassis and
remove the DIGITAL C.B.A. from the mechanism by referring the disassemble procedure describing in the
previous section.
No. ITEM/PART FIGURE
11 SLOT-IN
Fig.
UNIT/MOTOR D9-1
ANGLE/WORM Fig.
WHEEL
D9-2
12 INTERMEDIATEFig. D10
GEAR
13 SYNCHRO
Fig. D11
-GEAR
14 OUTER SIDE Fig. D12
PLATE-T
15 SUB
Fig. D13
RACK/T-MAIN
RACK
16 INTERMEDIATEFig. D14
GEAR
17 GUARD
Fig. D15
BLOCK /
SPINDLE
SHAFT (I)
http://cxema.ru
REMARKS
2-Screws (N-1)
4-Screws (N-2)
1-Cut washer (q)
1-Hook (r)
4-Screws (O)
1-Cut washer (s)
Slide the guard block to
arrow direction.