Download Quick Reference - Thomas C. Wilson
Transcript
07-TCCL001_quickref_pages.qxd 4/19/07 9:14 AM Page 34 VLD Vacuum Leak Detector™ Pin Point Leaky Tubes - 1/4 to 3-Inch OD Applications The Vacuum Leak Detector™ (VLD) is a simple test instrument used by manufacturers and users of condensers, heat exchangers and other tubular apparatus to identify leaky tubes. One man does the job. He seals the far end of each tube with a snap type tube plug, then he presses the rubber coated nozzle into the near end of the tube and depresses the trigger. Compressed air flows through a venturi chamber to produce a vacuum in the tested tube. When this vacuum reaches a satisfactory level, he releases the trigger. A steady Gauge reading indicates a good tube. A falling vacuum indicates a leaky tube. Using a 90 PSI dry clean air, a typical tube (1-inch Outer Diameter x 20 Gauge and 20-feet long) can be tested in 6 to 8 seconds. Tool weighs 21⁄4 lbs. and is equipped with a muffler, so it operates quietly even in confined areas. Kit No. 9836 for 5/8 to 11⁄4-Inch OD Tubes Consists of Vacuum Leak Detector™ Assembled with Nozzle Hose Assembly 12-Foot T-Handle Tube Plug Carrying Case Service Manual Part No. 42823 41460-1003 24360-0012 42834-1003 42837 SM-158 Accessory Parts for ‘VLD’ Tool Tube Plug Snap Type ID Inches (mm) 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 31/32 1 11⁄8 11⁄4 13⁄8 11⁄2 15⁄8 13⁄4 17⁄8 2 34 (9.5) (11.1) (12.7) (14.3) (15.9) (17.5) (19.1) (20.6) (22.2) (23.8) (24.6) (25.4) ( 28.6) (31.8) (34.9) (38.1) (41.3) (44.5) (47.6) (50.8) Part No. 41482 41483 41484 41485 41486 41487 41488 41489 41490 41491 41492 41493 41494 41495 41496 41497 41498 41499 41500 41501 Additional Nozzles* Available Nozzle for 1/4 to 3/4-Inch OD Tubes Nozzle for 5/8 to 11⁄4-Inch OD Tubes Nozzle for 11⁄8 to 2-Inch OD Tubes Nozzle for 17⁄8 to 3-Inch OD Tubes Part No. 41460-1002 41460-1003 41460-1004 41460-1005 *To be ordered in pairs (2) when T-Handle is used. Nozzle Extensions: For 5/8 to 11⁄4-Inch Tubes 12-Inch Lg For 11⁄8 to 2-Inch Tubes 12-Inch Lg For 11⁄8 to 2-Inch Tubes 24-Inch Lg Part No. 41461-3012 41461-0012 41461-0024