Download STC Number - Precise Flight

PRECISE FLIGHT, INC.
63354 POWELL BUTTE ROAD
BEND, OR 97701
800- 547-2558
Installation Report:
08085
Document Number: 121SMAN0002
STC NO. SA01075SE - SPEEDBRAKETM 2000 ELECTRICAL INSTALLATION MANUAL
1.2.2.1 Parts Lists
A source of possible confusion when reading drawings is the proper interpretation of the parts
list. This STC includes multiple aircraft models, and voltages, in the same drawing package.
Because of the difference between the Bonanza Model 33 and 36 to the Model 35 aircraft
installations, special care must be taken to make sure the correct installation is used.
Figure 2 below shows a 12V Model 35 speed brake installation, and which drawings are
applicable. For clarification, the applicable connections are shown shaded.
1
1
1
1
1
\
-5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
\
\
\
-4
-3
-2
QTY REQD
1
1
1
1
1
\
-1
4006-12
4002-12
4006-24
4002-24
4005-24
CODE
121S0103-5
121S0103-3
121S0103-2
121S0103-1
121S0014-1
121S0004-1
121S0003-4
121S0003-3
121S0003-2
121S0003-1
121S0002-2
121S0002-1
121S0001-5
121S0001-4
121S0001-3
121S0001-2
121S0001-1
PART NO.
CARTRIDGE INSTALL #33/36 R 12V
CARTRIDGE INSTALL #33/36 L 12V
CARTRIDGE INSTALL #33/36 R 24V
CARTRIDGE INSTALL #33/36 L 24V
ALC INTERCONNECT INSTALLATION
SYSTEM SCHEMATIC
CARTRIDGE INSTALL, 35, RT 12V
CARTRIDGE INSTALL, 35, LEFT 12V
CARTRIDGE INSTALL, 35, RT 24V
CARTRIDGE INSTALL, 35, LEFT 24V
COCKPIT CONTROL INSTALL, 12V
COCKPIT CONTROL INSTALL, 24V
SPEEDBRAKE INST – MODEL 33, 12V
SPEEDBRAKE INST – MODEL 35, 12V
SPEEDBRAKE INST – MODEL 33, 24V
SPEEDBRAKE INST – MODEL 35, 24V
SPEEDBRAKE INST – MODEL 36
---------------------------------------------------------------------
DESCRIPTION
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
MATERIAL/MFG.
ITEM
Figure 2 - Sample Parts List from Drawing 121S0001 Rev A
This chart shows us the kit number is a 4002-12, for part number 121S0001-4. Because all 35
models listed on the STC are applicable, this installation would be used for any V-tail Bonanza
model A35, B35, C35, D35, E35, F35, G35, 35R, H35, J35, K35, N35, P35, S35, V35, V35A,
V35B with a 12-14V electrical system as described in section 2.0 of this document, or on the
STC certificate. From here, the installer moves to the left until a “\” marks that applicable
installation. Follow the column up to see what quantity is greater than 0. Then follow the chart
back to the right to find the drawing/part number for the applicable installation. Drawings are
shown in this example, but parts work on the same principle on the other installation drawings.
Revision: B
File:
February 4, 2009
W:\Speedbrakes\121S\DOCS\Installation Manuals\121SMAN0002B.doc
Page 8