Download PhysioTrak

3.4.5
Cleaning
The monitor is not sterilizable. Never immerse the unit in any fluid or
attempt to clean it with liquid cleaning agents. Remove dirt and dust from
the monitor by wiping it with a soft, damp cloth.
Stains can be removed from the case by scrubbing it briskly with a damp
cloth. Unplug the monitor and remove the batteries before cleaning. Do not
permit liquid to contact the front or rear of the monitor, or permit liquid to
drip into the printer or cooling slots. Allow the unit to dry completely before
returning it to operation.
Cleaning Accessories
Any reusable patient accessories should be cleaned after each use. Disposable
patient accessories should be discarded and replaced with new items.
To clean reusable accessories, first, remove the accessory from the monitor.
Remove any dirt or debris using soap and water. Avoid immersing accessory
in any fluid for cleaning.
Inspect the accessory for any cracks, holes, tears, cuts, etc., that could affect
operation, and replace as necessary.
If disinfection is required, use only the recommended liquid surface
disinfectants, unless otherwise specified in the accessories listing.
Recommended surface disinfectants include dilute solutions of either
quaternary ammonium compounds, iodophors or gluteraldehydes.
3-20
P HYSIO TRAK
Release 1.0