Download Industries, Inc.

Industries, Inc.
10. Remove ball bearing. Use long nose pliers for ease of removal. Dislodge oil seal
with a suitable drift tool and remove.
11. Loosen setscrew “B”. This will allow spring pin “C” to become loose for easy
removal. Dislodge oil seal “D” with a suitable drift tool and remove. Save
transmission cover for later it will be needed for reassembly.
DISCLAIMER
Although the method used in this explanation is recommended to disassemble the transmission,
other perfectly acceptable procedures may accomplish the same result.
970156A 7/10
550 Elizabeth St. Waukesha, WI 53186 1-800-234-7205 www.ariesindustries.com
Page 6