Download Industries, Inc.

Industries, Inc.
12. A drill template P/N 580166 is supplied with upgrade kit (950241). A new hole
must be drilled and tapped to receive new rail on left hand side transmission
housing.
13. Bolt drill template to left side transmission housing as shown in photo below.
Drill housing using the supplied 11/64” bit all the way thru.
14. Remove drill template before tapping new hole.
15. Tap new hole with a 10-32 tap. Be sure to use cutting oil when tapping
970156A 7/10
550 Elizabeth St. Waukesha, WI 53186 1-800-234-7205 www.ariesindustries.com
Page 7