Download Mod: E77/4SPA7-N
Transcript
2.5.2EQUIPOTENTIAL 2.5.2 EQUIPOTENZIALE The unit should be included within an equipotential system whose efficiency must be tested according to the law in force.The L’apparecchiatura deve essere inclusa in un sistema equipotenziale la cui efficienza deve essere verificata secondo le norme screw marked with the label “Equipotential” is located near the terminal box on the base for models with oven, and at theback for in vigore. La vite contrassegnata con la targhetta “Equipotenziale” si trova vicina alla morsettiera sul basamento nei modelli thecon remaining forno e models. sul retro nei restanti modelli. 2.5.3 POWER CAVO D’ALIMENTAZIONE 2.5.3 SUPPLY CABLE TheL’apparecchiatura unit is supplied fitted the following voltages: vienefor consegnata predisposta per una delle seguenti tensioni: 3N AC 380...415V; 3 AC V 220...240V; 1N ACV220...240V 50/60 Hz. 3N AC 380...415 - 3 AC 220...240 TheIl flexible cable for supply connection notdeve haveessere characteristics lower than rubberalinsulation cavo flessibile perpower l’allacciamento alla lineashould elettrica di caratteristiche nonthe inferiori tipo con typeH07RN-F. isolamento in Thegomma cable should be inserted through the cable clamp and firmly fastened. Furthermore, the supply voltage unit functioH07RN-F. Il cavo deve essere introdotto attraverso il ferma cavo e fissato bene. Inoltre la tensionewiththe di alimentazione, ad apparecchio funzionante, non deve discostarsi dal valore della tensione ± 10%. ning should not go outside the value of the nominal tension ±10%. To Per haveaccedere access to themorsettiera terminal box in collegare order to connect the unit to ad a supply network having different thoseproalla onde l’apparecchiatura una rete d’alimentazione aventecharacteristics caratteristiche from diverse da quelle previste, o per sostituire il cavo d’alimentazione, occorre: vided for, or to replace the supply cable, you need to: - smontare il pannello frontale -remove the front panel (top or top + cabinet) collegare il cavo d’alimentazione alla morsettiera secondo le necessità, seguendo le indicazioni riportate sull’apposita -remove the appropriate panel on the left side (cooker with electric oven) etichetta collocata vicino alla morsettiera e nel presente libretto. -connect the cable to the terminal box according to need, and following the instructions shown on the provided stickernear the terminal bord and on the present booklet. 2.5.4 CONSIGLI PER L’INSTALLAZIONE Mettere in funzione 2.5.4 ADVICE TO l’apparecchio FITTERS secondo le istruzioni d’uso e spiegare il funzionamento all’utente utilizzando il libretto istruzioni e illustrando eventuali modifiche costruttive e/o funzionali. Activate the unit according to the use instructions, and explain its operation to the user by consulting the instruction Lasciare il libretto istruzioni all’utente spiegando che lo deve utilizzare per ogni ulteriore consultazione. booklet,illustrating also any manufacturing and/or functional modifications.Leave the instruction booklet with the user, advising that2.5.5 he/she should refer to it for any ALLE future consultation. COLLEGAMENTI DIVERSE RETI ELETTRICHE DI DISTRIBUZIONE 2.5.5 CONNECTIONS TO VARIOUS MAIN POWER SUPPLIES PE (Terra) giallo - verde N (NP) azzurro 3N AC 380...415 V 50/60 Hz Elementi 230 V L3(T)nero L2(S)nero L1(R)marrone PE (Terra) giallo - verde N (NP) azzurro 2N AC 380...415 V 50/60 Hz Elementi 230 V L2(S)nero L1(R)marrone PE(Terra) giallo - verde L3 (T) negro 3AC 220...240 V 50/60 Hz Elementi 230 V L2(S)nero L1(R)marrone Tab. 2 Tab. 2 I -8- -H-