Download scepter user guide

Section 2
Audio Owner Manual
MASTER
0
PIN 1
LIFT
0,
MASTER CONNECTIONS
PIN 1 LIFT
Used to disconnect pin 1 from the MONO output connector.
Used to eliminate ground loops.
MONO BAL OUT
Male XLR-3 (Pin 2 Hot). Self Compensating Electronically
Balanced. Controlled by Mono Out Level pot. Normally
derived from mix of Pre-Fader Left & Right(See Options
Section). Nom level of +4dBv; Capable of +27dBv output
into 600 ohms or greater.
AUX OUT
A
0
AUX OUT
B
0
AUX OUT
C
AUXAUNBALANCEDOUT
l/4” Jack. Controlled by Aux A Master. Nom level of +4dBv;
capable of +2ldBv into 600 ohms or greater.
AUXBUNBALANCEDOUT
l/4” Jack Controlled by Aux A Master. Nom level of +4dBv;
capable of +2ldBv into 600 ohms or greater.
AUXCUNBALANCEDOUT
l/4” Jack. Controlled by Aux A Master. Nom level of +4dBv;
capable of +2ldBv into 600 ohms or greater.
AUXDUNBALANCEDOUT
Q3
AUX OUT
D
l/4” Jack. Controlled by Aux A Master. Nom level of +4dBv;
capable of +2ldBv into 600 ohms or greater.
STEREOUNBALANCEDOUT
0
EREO
0
MONITOR
OUT
l/4” Stereo Jack; Tip is Left, Ring is Right. Controlled by
Stereo Out Level pot. Normally derived from Pre-Fader Left
& Right(See Options Section). Capable of +2ldBv into 600
ohms or greater.
MONITOR UNBALANCED OUT
l/4” Stereo Jack; Tip is Left, Ring is Right. Controlled by
Monitor Level pot. Signal follows Monitor Select switch and
Auto-PFL. Capable of +2ldBv into 600 ohms or greater.
0
14