Download Weight Controller HI-3030

9
CHAPTER 2
Calibration
the Channel you want to calibrate and repeat the C2
calibration procedures.
C2 Quick Calibration From the Web Page
Step 1. On the Weight Controller Home Page Click on
Configuration. (See Fig. 2-8) The Configuration
page appears. (See Fig. 2-9)
FIG. 2-10 CALIBRATION SUB-MENU
FIG. 2-8 CONFIGURATION MENU/SELECTING
SETUP
Step 3. Click on the Channel pull down menu you will see
up to 4 channels to select. Select the scale you want
calibrate by clicking on the channel number.
Step 4. The Load Sensor number is a read only field. It tells
you how many load sensors are connected to the
instrument.
Step 5. To enter the Reference Weight click in the Reference Weight field. (See Fig. 2-10)
a.
b.
The Reference Point is the total weight that
is currently on the scale.
If you have nothing on the scale the Ref
Point is 0. If you have 5 lbs on the scale the
Ref Point is 5.
Step 6. To clear the entry, move the cursor over the current
reference weight which highlights the weight value.
Step 7. Use your keyboard to type in the new value. In our
example we entered 3.00. (See Fig. 2-10)
Step 8. Click on the Do C2 Calibration button.
Step 9. A page telling you that the C2 Calibration completed OK appears. (See Fig. 2-11)
FIG. 2-9 CONFIGURATION PAGE
Step 2. Click on Calibration. The Calibration Sub-menu
appears. (See Fig. 2-10)
FIG. 2-11 CAL COMPLETED OK
Step 10. Click on “Back” to return to the Calibration page.
Step 11. Click on “Home” to return to the Weight Controller
Home page.
Step 12. C2 calibration is complete.