Download Fecon Attachments
Transcript
MINNESOTA PRICING PAGES (Typed Your Responses Required in Yellow Cells SEQ. #416-713 Price quote for: Aftermarket Tractor/Skidsteer Attachments Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Titan Machinery Inc. Andy Bethel 6340 County Road 101E 1.0 JULY, 2013 Shakopee, MN, 55379 952-445-5400 800-795-9274 952-445-0365 [email protected] Fecon Manufacturer's Name www.fecon.com All Attachments Attachment Description Warranty Term (months, years) 1 year Discount to be applied to Price List 2% Date & I.D. of Price List 2.0 1-Jan-13 Delivery Charges NO FLAT RATE ALLOWED (SEE SPECIAL TERMS AND CONDITIONS) Nearest Titan Case CE Location DELIVERY STARTING POINT: City, State, Zip Price per loaded mile: Minimum Delivery Charge (if any) $ 4.00 $ 100.00 (SEE SPECIAL TERMS AND CONDITIONS) 3.0 4.0 Price for additional Service Manual Free Price for additional Parts Manual Free $ Installation Labor Rate - Per Hour 108.00 Installation services may be requested on a "as needed" basis. If not available, list 'N/A' (See Special Terms and Conditions). 5.0 New Aftermarket Attachment Rental Program If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. (See Solicitation Special Terms & Conditions.) Hourly Rental Rate: Weekly Rental Rate: Monthly Rental Rate: N/A N/A N/A Percent (%) of Rental Fee applied toward purchase price: 6.0 Vendor Owned Rental or Demo Attachment Sales Program (See Solicitation Special Terms and Conditions.) DEDUCT 'Cost per Used Hour' from the original Contract Price Warranty Program Options: (provide details) N/A N/A Operator cab must be protected w1th properly mamtained W' LEXAN® glass or equal. Always ensure your camer's safety features. 1nclud1ng ROPs & FOPs. meet your job sa fety requirements. Fecon® Bull Hog® Skid Steer Pricing Included with a Skid Steer Unit: Universal Skid Steer Mount Hydraulic Protection Block HOT Rotor System With Four Tooling Options Weld-On Push Bar (See Photo To Right) Hydraulic Rotor Brake Hydraulic Lines for Motor Drive (Includes Quick Disconnect Fittings) Model Overall Width Working Width Body Style GPM Weight Rotor Bearings BH62SS 63" 50" Skid Steer 24-45 2050 lbs ST65mm Motor(s) List Price $22,830 $25,040 $19,950 $28,150 BH74SS 74" 61" Skid Steer 24-45 2425 lbs ST65mm BH74SM* 74" 61" Skid Steer 24-45 2425 lbs ST65mm BH85SS 85" 72" Skid Steer 24-45 2580 lbs ST65mm BH62SS BH74SS BH74SM BH85SS $2,380 $2,380 N/A $2,380 Cooling Kit N/A $2,160 $2,160 N/A Pressure Gauge In Motor Cover $820 $820 $820 $820 Total with Variable Motor $25,210 $27.420 N/ A $30,530 *Only shipped with FGT Samurai knife tools Factory Installed Options Variable Displacement Motor ( 107cc) 3 Position Push Bar $920 $920 $920 $920 Hydraulic Tilting Push Bar $2,260 $2,260 $2,260 $2,260 Trap Door $1,290 $1 ,290 $1,290 $1 ,290 Low Flow Control Options Single Function Electric I Hydraulic Valve #07 4-4 9-02 5 Dual Funct'1on Electric I Hydraulic Valve #074-49-02 6 Dual Fun ct'10n Electric I Hydraulic Valve #07 4-4 9-027 Bobcat- Single/ Dual Function Electric I Hydraulic Valve #074-49-125 List Price To be used when single function is required from the motor circuit because there is no low flow. or wh en a second function is desired to be taken from the motor circuit on a tractor that already has a low flow for the first low fl ow fu nction. To be used when the re is no low flow from tractor or when customer prefers both low flow functions be run off the motor circuit of the head. The benefit is th at each function flow can be independently regulated and no low flow lines need to be run to the tractor. To be used when low fl ow is available from the tractor and two low fl ow functions will be run off the low flow of the tractor with different f low requi rements. Flow reducing orifices are installed for the circuit requiring lower flow. Example: hydraulic tilting push bar will require more fl ow than trap door and trap door will slam if flow is not reduced to trap door. Optional controller required when a mulcher is equipped with diverter valve 074-49-025 to run a trap door and/ or hydraulic push bar on Bobcat tractors with a 7-pin connector. It is not required when the Bobcat is equipped with the less common 14-pin connector. This does not repl ace the diverter valve#074-49-025 and is an additional requirement. $890 $1 ,420 $660 $310 NOTE: 1. 2. Prices include installation at factory on new units. Buyer is responsible for ensuring carrier has sufficient low flow circuits and controls for options. 3. Actual Weights will vary based on options selected. 4. Please see "Bull Hog® Tooling Pricing" for individual tooling upgrade pricing. 3 Position Pin-On Push Bar Option Manually adjust the push bar to 3 different positions depending on the type of material and application being performed. Effective: January 1, 2013 800.528.3113 www.fecon.com Safety is the responsibility of the operator. Prices and specifications subject to change without notice. Auxiliary equipment options or attachments not listed, may be quoted upon request. Certain guarding and features may have been removed for illustrativepurpose. always run with proper guarding Rev: 1.0 Fecon® Bull Hog® Hydraulic Ground Pricing Operator cab must be protected w1th properly maintained Yz" LEXAN® glass or equal. Always ensure your carrier's safety features. including ROPs & FOPs. meet your job safety requirements. Included with Hydraulic Ground Units: Hydraulic Motor(s) Push Bar (Configuration Will Vary By Model) Hydraulic Protection Kit Internal Plumbing Integrated Mount (For Most Carriers) Trap Door (On Most Models) Model BH74H-3 BH74H-4 BH74S0-3 (SS mount) BH74S0-4 (SS mount) BH85SD-3 (SS mount) BH85SD-4 (SS mount) BH85H-3 BH85H-4 BH99H-3 BH99H-4 BH120H-1 BH120H-3 BH200H-1 BH200H-3 BH200HX0-1 BH200HX0-3 BH200HX0-4 BH300H-1 BH300H-3 BH300HX0-1 BH300HX0-3 BH300HX0-4 BH300HX0-5 BH350HX0-4 BH350HX0-5 Overall Width 76" 76" 76" 76" 87" 87" 87" 87" 103" 103" 100" 100" 102" 102" 102" 102" 102" 109" 109" 109" 109" 109" 109" 110" 110" Working Width 61" 61" 61" 61" 72" 72" 72" 72" 86" 86" 86" 86" 85" 85" 85" 85" 85" 89" 89" 89" 89" 89" 89" 90" 90" Body Style CSD CSD CSD CSD CSD CSD CSD CSD CSD CSD so so so so so so so so SO so so so SO so so Trap Door Yes Yes Optional Optional Optional Optional Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Push Bar PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB PPB Max HP 225 225 225 225 225 225 225 225 225 225 300 300 300 300 350 350 350 300 300 600 600 600 600 600 600 GPM 27-50 50-65 27-50 50-65 27-50 50-65 27-50 50-65 27-50 50-65 50-100 50-100 50-100 50-100 50-105 50-100 100-180 80-100 80-100 80-105 80-100 100-180 180-210 100-180 180-210 Rotor Bearing SD65mm SD65mm S065mm SD65mm SD65mm SD65mm S065mm SD65mm SD65mm SD65mm S065mm SD65mm SD65mm SD65mm S090mm SD90mm SD90mm SD65mm SD65mm S090mm SD90mm SD90mm SD90mm S090mm SD90mm Motors Weight List Price 1 x 107V 1 x 160V 1 x 107V 1 x 160V 1 x 107V 1 x 160V 1 x 107V 1 x 160V 1 x 107V 1 x 160V 2 X 63 2 X 107 2 X 63 2 x 107V 2 X 63 2 x 107V 2 x 160V 2 X 63 2 x 107V 2 X 63 2 x 107V 2 x 160V 2 x 250V 2 x 160V 2 x 250V 2750 2750 2750 2750 3050 3050 3050 3050 4330 4330 4900 4900 5790 5790 5790 5790 5790 7710 7710 7710 7710 7710 7710 8200 8200 $34,620 $37,650 $31,330 $35,350 $33,100 $37,170 $36,390 $40,470 $47,250 $51,630 $56,640 $63,470 $56,960 $63,790 $64,810 $72,650 $76,240 $72,740 $77,610 $78,630 $86,350 $89,770 $102,840 $90,140 $106,900 lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs Factory Installed Options I List Price Trap Door $1,290 For BH74SD and BH85SD Models I Hydraulic Tilting Labor, parts or materials required for field insta Ilations not included. Does not include plumbing to the carrier or controls to Push Bar: activate tilt function. Includes hydraulic tilt cylinders and rake teeth on push bar; all installed at factory. Hydraulic Tilting Push Bar For BH74H and BH85H Models $2,260 Hydraulic Tilting Push Bar For BH99H- BH350H Models $2,360 I NOTE: 1. Maximum flow is based on 6000 PSI operating pressure. Consult factory for custom configuraf1ons. I 2. 3. Hydraulic horse power should not exceed maximum rated horse power. (GPM x PSI)/1714~HYD HP). 4. Actual weights will vary based on motor. mount and options selected. Please see "Bull Hog@Tooling Pricing" for individual tooling upgrade pricing. 5. Motors with "V" denote variable displacement motor. Variable displacement motors afford benefit within rated GPM. Effective: January 151 2013 800.528.3113 www.fecon.com Safety IS the responsibility of the operator. Prices and specifications subject to change without notice. Auxiliary equipment options or attachments not listed, may be quoted upon request Certain guarding and features may have been removed for illustrative purpose. always run with proper guarding Rev: 1.0 Oper<Jtor cab must be protected with properly maintained W' LEXAN® glass or equal. Always ensure your carrier's safety features, including ROPs & FOPs, meet your JOb safety requirements. Fecon® Bull Hog® PTO Pricing Included with PTO Units: Three-Point Hitch Push Bar Hydraulic Trap Door Hydraulic Top Link PTO Shaft Slip Clutch and Over Running Clutch (in most models) Overall Width Working Width Body Style Trap Door Push Bar HP PTO RPM PTO Shaft Gear Box Rotor Bearing BH74 74" 61" ST Yes PPB 80-90 540 1.375" Rigid ST65mm BH74 74" 61" ST Yes PPB 90-140 1000 1.375" Rigid ST65mm BH85 85" 72" ST Yes PPB 80-90 540 1.375" Rigid ST65mm BH85 85" 72'' ST Yes PPB 90-140 1000 1.375" Rigid ST65mm BH99 101" 86" ST Yes PPB 90-140 1000 1.75" Rigid ST65mm BH120-P 100" 86" SD Yes HYB 140-185 1000 1.75" Rigid ST65mm BH200-P 102'' 85" SD Yes HYB 140- 185 1000 1.75" Pivoting SD90mm BH200-PX 102'' 85" SD Yes HYB 140-450 1000 1.75" Pivoting SD90mm BH300-PX 109" 89" so Yes HYB 200-450 1000 1.75" Pivoting SD90mm BH300-PX HYBRID 108" 89" SD Yes HYB 200- 350 1000 1.75" Pivoting SD65mm BH350-P 11 0" 89" so Yes HYB 250-450 1.75" Pivoting SD90mm H600-PX Bioharvester 112" 90" SD Yes HYB 230- 440 1.75" Pivoting SD65mm Model 10001325 10001325 Driveline Clutch On PTO Shaft On PTO Shaft On PTO Shaft On PTO Shaft On PTO Shaft On PTO Shaft On PTO Shaft Inside Head Inside Head Inside Head Weight list Price 2690 lbs $27,120 2690 lbs $27,120 2970 lbs $28,440 2970 lbs $28,440 4330 lbs $34,190 4900 lbs $51 ,390 5930 lbs $54,950 5930 lbs $62,370 7850 lbs $75,060 7980 lbs $79,210 None 8200 lbs $95,230 Inside Head 11750 lbs $133,900 Factory Installed Options Hydraulic Tilting Push Bar: List Price Labor, parts or materials required for field installations not included. Does not include plumbing to the carrier or controls to activate tilt function. Hydraulic Tilting Push Bar For BH74 and BH85 Models Hydraulic Tilting Push Bar For BH99 Models $2,260 $2,360 NOTE: 1. 2. 3. 4. 5. 6. BH200, BH300, BH350 and H600-P units require gear box cooling over 300HP. Call for quote. BH200, BH300 and BH350 units come equipped as standard with hydraulic tilting push bar. Models with "P" in the model name have a pivoting gear box and synchronization bar. Models without "P" in model name have fixed-position gear boxes. Actual Weights will vary based on options selected. Please see "Bull Hog®Tooling Pricing" for individua I tooling upgrade pricing. Effective: January 151 2013 800.528.3113 www.fecon.com Safety IS the responsltJIIity of the operator. Prices and specifications subject to change without notice. Auxiliary equipment options or attachments not listed, may be quoted upon request Certain guarding and features may have been removed for illustrative purpose, always run with proper guarding Rev: 1.0 Oper<Jtor cab must be protected with properly maintained W' LEXAN® glass or equal. Always ensure your carrier's safety features, including ROPs & FOPs, meet your JOb safety requirements. Fecon® Bull Hog® Tooling Pricing Rotor Type HOT HOT HOT HOT HOT HOT HOT Tool Description Part Number Standard Double Carbide HOT Chipper Knife Holder, HOT Chipper Knife Chipper Knife & Holder Single Carbide HOT Tool Stone/Rock HOT Tool Rotovator Tool (Soil Hog) BH46HDT01A BH46HM017 BH46HM028.02 N/A BH46HOT02A BH46HOT03A BH46HDT04V List Price $79.99 $52.47 $24.03 $78.16 $72.85 $92.00 $92.00 FGT FGT FGT Tool, FGT Standard Duty Samurai Knife Tool Knife Tool, FGT Severe Duty 320-15-009 320-14-050 320-15-01 0 $76.00 $31.50 $105.83 Additions or Deductions to Convert Rotor from Standard Tools 18 -$33 -$129 +$216 +$216 Double Carbide Stone Tool Single Carbide Chipper Knife 48 -$88 -$343 +$576 +$576 -$861 -$1,395 -$1 ,662 -$2,196 +$689 +$868 +$1 ,047 +$1 ,226 +$1 ,584 *FGT Rotors w/ standard tools have 1 SO tool at each end of the rotor. Tool Quantity for CEM36 BH47EXC BH62 -All BH74 -All BH80 -All BH85 -All BH99 -All BH120 -All BH200EXC -All BH200 Ground (Wide Body) BH300- All HOT Rotor System Tool Choices Tool Quantity in Head 30 36 -$44 -$55 -$66 -$171 -$214 -$257 +$288 +$360 +$432 +$432 +$288 +$360 24 18 24 30 36 48 X X X X X X X X X X X FGT Rotor System Tool Choices Double Carbide Severe Duty Samurai Knife Effective: January 151 2013 800.528.3113 www.fecon.com Safety IS the responsltJIIity of the operator. Prices and specifications subject to change without notice. Auxiliary equipment options or attachments not listed, may be quoted upon request Certain guarding and features may have been removed for illustrative purpose, always run with proper guarding Rev: 1.0 Operator cab must be protected with properly maintarned Yz" LEXAN® gla ss or equal Always ensure your camer's safety features. including ROPs & FOPs, meet your job safety reqwements Fecon® Stump Hog Pricing Fecon® Stump Hog Pricing Model Wheel Wheel Diameter # ofTools 26" 32 34" 90 40" 116 Flow@ PSI Hydraulic HP Weight Mount Hoses List Price SH260* 75-100 hp 30-45@3000-4750 1640 lbs Yes Yes $14,950 61-69@6000 SH140** 140-170 hp $32,360 2950 lbs Yes Yes SH400 170-250 hp 65-90@3500-5500 4550 lbs Yes No $49,450 NOTE:*On SH260 add $377 for cab controller and cord for earners that cannot control the Stump Hog through ex1st1ng cab controls. **SH 140 can be set up for FTX130 ot FTX140. Installation on many other carriers is possible. Call for assistance in assessing fit for ca rriers not listed. Fecon® Excavator Stump Hog Pricing Model SH340EX-2 Wheel Weight Motor Flow Hoses # ofTools 34" 90 2360 lbs 125 cc 75-90 No . . NOTE: Bolt-on mounts spec1f1c to the excavator Included . Wheel Diameter List Price $39,530 Fecon® Tree Shear Pricing Fecon® Skid Steer Tree Shear Pricing Model FBS1200SS - Dual Acting* FBS1400SS- Single Acting* FBS1500SS- Dual Acting* Spray Option Weight 1250 lbs 1800 lbs 1900 lbs Max. Diameter Flow Required List Price No Upper Structure** 12" 15-20 gpm $12,100 $8,340 14" $12,970 15-20 gpm $8.650 15" 15-20 gpm $14,890 $10,610 10- gallon capacity $1,300 Wiring harness to run from diverter valve to 7 pin connector. Bobcat Option $400 Will not work on older Bobcat models with 12 pin connector. NOTE: *Skid steer shears include 12V diverter valve for switch between grabber and accumulator functions. **No upper structure means no grabber arms or accumulator arms, does include short push bar. Fecon® Excavator Tree Shear Pricing Excavator Tree Shear Kit Weight Description List Price Conversion Kit- SS to EXC 2001bs Includes bolt-on mount specific to the excavator. Bolts to the FBS1200SS/ FBS1400SS/ FBS1500SS universal mounts. Also includes 24V diverter valve required for the excavator $2,960 Model FBS1600EXC* \20 ton - 30 ton) Latera I Tilt Option - For FBS1600EXC *Includes bolt-on mount Weight 37001bs Max Diameter Flow Required 16" 15-35 gpm 40 degrees each side List Price $26,660 $8,620 Effective: January 151, 2013 800.528.3113 www.fecon.com Safety rs the responsrtJrltty of the operator. Prices and specifications subject to change without notice. Auxiliary equipment options or attachments not listed. may be quoted upon requ est Certain guarding and features may have been removed for illustrative purpose. always run with proper guarding Rev: 1.0 Operator cab must be protected w1th properly maintained W' LE:I(AN"' glass or equal. Always ensure your earner's safety features, 1nclud1ng ROPs & FOPs, meet your job safety requirements. Fecon® Grapple Pricing Fecon® Skid Steer Root Grapple/ Bucket Grapple Pricing Model FRG72 FBG72 Weight 863 lbs 8501bs Width 72" 72" List Price $3,290 $3,290 Fecon® Skid Steer Front Grapple Pricing Model FFG48 FFG60 FFG72 Weight 690 lbs 800 lbs 850 lbs Lift Capacity 6,600 lbs 9,900 lbs 9,900 lbs Opening 48" 60" 72" List Price $7,670 $10,610 $11,720 Grapple & Rotator Only Call $6,510 $7,210 Winch Option: Capacity List Price Cable FGW1000 10,000 lbs 3/8 X 100 $4,720 NOTE: FGW1 000 fits all skid steer front grapples. Fecon® PTO Tractor Grapple Pricing Model FTG48 FTG60 Weight Opening Lift Capacity 48" 480 lbs 6,600 lbs 60" 580 lbs 9,900 lbs NOTE: Manual Rotation. Utilizes tractors top link connect List Price $4,930 $7,740 Fecon® Soil Hog Pricing Fecon® Soil Hog Pricing Standard Machines Overall Width Working Width Rotor Diameter Number of Tools PTO Speed RFL700-20001 101" 79" 28" 48 1000 1 11 0" 79" RFB00-2000 32" 48 1000 79" 39" RF1000-20001 11 0" 64 1000 47" 25.6" 28" RF700-650 16 1000 38" 14" 28" Roto Hog 10 1000 Compacting Roller For Roto Hog and RF700-650 NOTE: 1 With compacting Roller. 2 RF700-650 working depth 0-5.3" with skid shoes, 7.3" with skid shoes removed. Weight Horse Power 5742 lbs 8046 lbs 9240 lbs 3,680 lbs 12101bs 120-180 180-300 240-400 100-240 75-150 Max. Working Depth 6" 12" 20" 7.3"2 10" List Price $54,260 $89,820 $96,200 $34,460 $24,900 $1 ,530 Effective: January 151, 2013 800.528.3113 www.fecon.com Safety IS the responsibility of the operator. Prices and specifications subject to change without notice. Auxiliary equipment options or attachments not listed, may be quoted upon requ est Certain guarding and features may have been removed for illustrative purpose, always run with proper guarding Rev: 1.0 Fecon® Price List Key Bull Hog Skid Steer BH- Bull Hog SS- Skid Steer Bull Hog® Hydraulic Ground BH- Bull Hog H- Hydraulic SS- Skid Steer SO- Sever Duty CSD- Compact Severe Duty WPB- Weld-on Push Bar PPB - Pin-on Push Bar -1 - 2 x 63cc Motors -2- 2 x 80cc Motors -3- 2 x 107cc Variable Displacement Motors -4- 2 x 160cc Variable Displacement Motors -5-2 x 250cc Variable Displacement Motors XD- 90mm rotor bearing and stub shafts V- Variable Displacement Motor Bull Hog® PTO Pricing BH- Bull Hog P- Pivoting Gear Box X- Drive line Clutch Inside Head ST- Standard SO- Severe Duty PPB - Pin-on Push Bar HYB- Hydraulic Push Bar Bull Hog® Excavator Pricing CEM- Compact Equipment Mulcher BH- Bull Hog EXC - Excavator -1 -Motor Configuration -2- Motor Configuration -3- Motor Configuration -4 - Motor Configuration V- Variable Displacement Motor SO- Severe Duty SDV- Severe Duty Variable Displacement XD- 90mm Rotor Bearing and Stub Shaft BHP- Bull Hog Power Pack Tractors FTX- Fe con Tracked Carriers 00- Quick Disconnect L- Loader Arms FM - Forestry Mower SLGP- Super Low Ground Pressure Stump Hog SH- Stump Hog Tree Shear FBS - Fecon Bunching Shear SS -Skid Steer EXC- Excavator Grapple FRG - Fecon Root Grapple FBG- Fecon Bucket Grapple FFG - Fecon Front Grapple FGW- Fecon Grapple Winch FTG - Fecon Tractor Grapple Deck Mower FRM - Fecon Rotary Mower Chippers RA- Rigid Axle (on Chipper Trailer) BA- Bogie axle (on Chipper Trailer) L- Loader (On Chipper Trailer) RTC- Rubber Tire Chipper FCM - Fecon Chipper Module Mixer CMD- Continuous Mix Diesel CME- Continuous Mix Electric Effective: January 151, 2013 800.528.3113 www.fecon.com Safety rs the responsrtJrltty of the operator. Prices and specifications subject to change without notice. Auxiliary equipment options or attachments not listed, may be quoted upon requ est Certain guarding and features may have been removed for illustrative purpose, always run with proper guarding Rev: 1.0