Download Service - Twin Disc

Transcript
Disassembly
Twin Disc, Incorporated
Primary and Secondary Clutch Shaft Assemblies
PTO Cover
1.
Place the transmission on blocks with the output flange at the top. Be
sure transmission is supported securely.
2.
Remove the PTO cover (1).
a.
b.
Gently tap the PTO cover to break the sealer bond from the
transmission housing.
Remove the PTO cover.
1
2052-027
2012-018
Figure 36. PTO (1) Removal
3.
Remove the two O-rings (2) located in the manifold counterbores.
RO58-6557
Figure 37. Manifold O-ring (2) Removal
Marine Transmission Service Manual #1021654
75