Download CT/e Dual 3.x CONFORMANCE STATEMENT

GE MEDICAL SYSTEMS
DIR 2378622 REV 2.2
CT/E DUAL DICOM CONFORMANCE STATEMENT
6.6.2 Configurable Parameters
The following fields are configurable for the DICOM Print SCU AE:
Note: All configurations should be performed by a GE Field Service Engineer.
•
Local IP Address
•
Local IP Netmask
•
Max PDU length
•
The following DICOM print parameters are configurable. The valid ranges are shown in earlier sections of
this conformance statement.
•
•
•
Medium Type (2000, 0030)
•
Film Destination (2000, 0040)
•
Magnification Type (2010, 0060)
•
Min Density (2010, 0120)
•
Max Density (2010, 0130)
•
Empty Image Density (2010, 0110)
•
Border Density (2010, 0100)
•
Configuration Information (2010, 0150)
•
Smoothing Type (2010, 0080)
The following network timers are supported and are configurable. When these timers expire the association
is terminated. The default values are:
•
Association Time out = 600 seconds
•
Session Time out = 3000 seconds (total time for open association)
•
N-SET Time out = 300 seconds
•
N-ACTION Time out = 300 seconds
•
N-CREATE Time out = 300 seconds
•
N-DELETE Time out = 300 seconds
•
N-GET Time out = 100 seconds
Time-outs, which are set for all hosts, are configurable in dprint.cfg:
*Association time-out - bi_assoc_tio
Do not duplicate
95