Download instruction for use

42
43
44
4.3.7 Fine adjustments to the back unit
If a solid back is used in place of the back upholstery, the back unit can be adjusted separately
in order to optimise the seating position.
Remove the rear wheels. Loosen the four seat tube screw connections / nuts of the back unit on
the seat tubes so that you can move it freely later. Then loosen the back tube screw connections
on the side panels (Figure 45).
Now move the back unit on the seat tubes until it reaches the desired position (Figure 46). Use the
scale on the bottom of the seat tubes in order to make sure the position is even on both sides.
Retighten all screws.
19