Download Foreword

Transcript
ISOFIX child seat – where fitted) to the vehicle
ISOFIX brackets located in slots on the slope of
the rear outer seat cushions (refer to the ISOFIX
label for appropriate locations).
TOP TETHER STRAP FOR CHILD
RESTRAINT
4. After attaching the child restraint and before placing the child in it, use force to check that it does
not tilt too far from side to side and tug it forward
to make sure that the child restraint is securely
held in place. Make sure that both ISOFIX anchorages have latched correctly.
5. Make sure that the child restraint is properly secured prior to each use.
NPA921Z
NOTE
•
For forward facing ISOFIX child restraint position on the rear seat, slide the front seat as far
forwards as possible.
•
For rearward facing ISOFIX child restraint position on the rear seat, slide the front seat
backwards until it touches the edge of the
child restraint.
A Top tether clip
j
j
B Child restraint anchor bar
The top tether strap of the child restraint must be
secured to the provided anchor point of your vehicle
(see “Anchor point locations (where fitted)” later in
this section).
WARNING
•
Child restraint anchorages are designed to
withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat
belts, harnesses or for attaching other items
or equipment to the vehicle.
•
The child restraint top tether strap may be
damaged by contact with the rear parcel shelf
or items in the luggage compartment area.
Remove the rear parcel shelf from the vehicle
or secure it in the luggage compartment area
see “Rear parcel shelf (where fitted)” later in
this section. Also, secure any loose items in
the luggage compartment. Your child could
be seriously injured or killed in a collision if
the top tether strap is damaged.
Installing top tether strap
1. Adjust the head restraint to the upper position.
2. Position the top tether strap over the top of the
seatback beneath the head restraint. Secure the
top tether hook to the tether anchor bracket that
provides the straightest installation. Tighten the
strap according to manufacturer’s instructions to
remove any slack.
Safety — seats, seat belts and supplemental restraint system
1-27