Download USER GUIDE - CAREstream America

CHAPTER five: START-UP PROCEDURE
Powering VeinViewer vision
VeinViewer Vision may be operated by AC
(electrical outlet) or battery power.
! VeinViewer Vision is shipped with a
detachable Power Cord. The Power Cord
supplied acts as the MAINS disconnect
device, and is compliant for North
American use.
! VeinViewer Vision comes included with
a North American only Power Cord.
For destinations other than North
America, the distributor country or sales
representative in the destination country
is required to provide the appropriate,
detachable medical-grade Power Cord.
This medical-grade cord must be compliant
with both the destination country’s
power requirements, and the electrical
requirements specified in the
User Guide.
VE IN V IEWER VI SI ON AND V IS IO N X T N D US ER GUIDE
19
WARNING
• Inspect the Power Cord and Plug on
a regular basis, to avoid the risk of
electrical shock and/or fire hazard. If the
Power Cord and plug are or appeared
damaged, do NOT use the VeinViewer
Vision unit, and immediately contact the
Christie Technical Support department
for further instruction.
! The VeinViewer Vision Battery comes
partially charged and should be
immediately ready for training purposes.
It is recommended that you charge
VeinViewer overnight before beginning
regular continued use.
020-300036-03 rEV. 1 (2012-09)