Download Bearing self study guide

Transcript
Chapter 4 Review
To take this test simply place a card or sheet of paper under the first question.
After you’ve read it (and answered it to yourself), slide the paper down below the next question.
The correct answer to the first problem will appear directly to the right of the new question. Be
sure not to skip any of the questions. This learning technique assures more than four times the
normal retention rate for even this technical subject.
1. An example of a non-tapered roller bearing is the _______________.
N A. cylindrical roller bearing
N B. needle roller bearing
N C. both of the above
N D. none of the above
4
1. C
2. The construction feature which makes tapered roller bearings
unique is that the races are _______________.
N A. attachable
N B. separable
N C. self-aligning
N D. none of the above
2. B
3. The advantage of the tapered roller bearing is that _______________.
N A. each roller has a share in the total workload
N B. each roller can align itself perfectly between the tapered
faces of the cup and cone, without guidance by the cage
N C. its wide contact area compels each roller to
maintain accurate alignment
N D. all of the above
3. D
4. Cylindrical roller bearing applications include _______________.
N A. transmissions
N B. differentials
N C. rear axle shafts
N D. all of the above
4. D
5. A tapered roller bearing has the ability to handle _______________.
N A. all loads in any combination
N B. radial loads only
N C. thrust loads only
N D. none of the above
5. A
19