Download Instruction Manual
Transcript
Contents Intended Use, Principles of Operation and Limitations............................................................... 5 Intended Use of the SenTec Digital Monitoring System (SDMS)....................................................................................... 5 Transcutaneous PCO2 and PO2 ..........................................................................................................................................5 Pulse Oximetry..................................................................................................................................................................7 SenTec TC Sensors............................................................................................................................................................9 The SenTec Digital Monitoring System (SDMS)......................................................................... 10 Setting up the SDMS.................................................................................................................. 12 Connect SDM to AC Power.............................................................................................................................................. 12 Battery Operation of the SDM......................................................................................................................................... 12 Turning on the SDM......................................................................................................................................................... 12 Installation of the Gas Bottle (Service Gas-0812)........................................................................................................... 13 Connection/Disconnection of Digital Sensor Adapter Cable............................................................................................ 13 Connection of a SenTec TC Sensor.................................................................................................................................. 14 Sensor Check, Sensor Calibration/Storage and Membrane Change.......................................... 15 Checking a SenTec TC Sensor......................................................................................................................................... 15 Sensor Calibration and Storage....................................................................................................................................... 16 Changing the Sensor Membrane..................................................................................................................................... 17 Patient Monitoring with the SDMS ........................................................................................... 20 Selection of Patient Type, Measurement Site, and Sensor Attachment Accessory ......................................................... 20 Check SDM Settings and System Readiness.................................................................................................................... 22 Sensor Application Using a Multi‑Site Attachment Ring................................................................................................... 24 Sensor Application Using an Ear Clip............................................................................................................................... 27 Patient Monitoring........................................................................................................................................................... 29 Sensor Removal with Multi‑Site Attachment Ring........................................................................................................... 38 Sensor Removal with Ear Clip.......................................................................................................................................... 40 Page 3 . Contents