Download STR-W777

Transcript
Output
MD/VIDEO 1 OUT (phono jacks): voltage
450/250mV, impedance 1kΩ
PHONES (stereo phone jack): accepts
headphones of 8Ω or more.
FRONT SPEAKER:
accepts impedance of 6 to 16Ω
CENTER SPEAKER:
accepts impedance of 8 to 16Ω
REAR SPEAKER:
accepts impedance of 8 to 16Ω
SUPER WOOFER:
Voltage 1V, impedance 1kΩ
AM tuner section
AV INPUT VIDEO (phone jack): 1Vp-p, 75Ω
MONITOR OUT (phone jack): 1Vp-p, 75Ω
Intermediate frequency
Antenna
Tuning range
Australian model:
Other models:
Video section
Inputs
Outputs
531 – 1,602kHz (with the AM tuning interval
set at 9kHz)
530 – 1,710kHz (with the AM tuning interval
set at 10kHz)
MW: 531 – 1,602kHz (with the MW tuning
interval set at 9kHz)
530 – 1,710kHz (with the MW tuning interval
set at 10kHz)
SW: 5.95 – 17.90MHz (with the SW tuning
interval set at 5kHz)
LW: 153 – 279kHz (with the interval set at
3kHz)
450kHz
AM loop antenna External antenna terminal
Tuner section
General
FM stereo, FM/AM superheterodyne tuner
Power requirements
Australian models:
240V AC, 50/60Hz
AEP, UK, East European, CIS models:
230V AC, 50/60Hz
Other models:
120V or 220V or 230 – 240, 50/60Hz
Adjustable with voltage selector
Power consumption
270W (AEP, UK, East European, CIS models)
300W (Other models)
Dimensions (w/h/d)
Approx. 288 × 205 × 375mm
Mass
Approx. 8.8kg
Supplied accessories:
AM loop antenna (1)
Remote RM-SR77 (1)
Size AA (R6) batteries (2)
FM lead antenna (1)
Speaker cords (5)
Front speaker pads (8)
FM tuner section
Tuning range
3 band type model
4 band type model
Aerial
Aerial terminals
Intermediate frequency
87.5 – 108.0MHz (50kHz step)
65.0 – 74.0MHz (10kHz step)
87.5 – 108.0MHz (50kHz step)
FM lead aerial
75Ω unbalanced
10.7MHz
UKV tuner section (4 band type model only)
Tuning range
65.0 – 74.0MHz (10kHz step)
Polar Stereo
Design and specifications are subject to change without notice.
—2—