Download 2016 Lyrik

Transcript
5
Use your fingers to install the bottom bolt into the air shaft.
DPA
Firmly pull on the air shaft and bottom bolt to remove the air
shaft assembly from the upper tube.
Unthread and remove the bottom bolt from the air shaft.
Clean and inspect the assembly for damage.
DPA
SA
SA
6
Spray isopropyl alcohol on the inside and outside of the upper
tube and clean it with a rag.
Wrap a rag around a long dowel and insert it into the upper
tube to clean inside the upper tube.
7
Remove the seal head, wave spring, and backup ring from the
air shaft.
SA
DPA
Air Spring Removal
18