Download PART

DOC NO
8202-0006
PART (Ⅱ)
NO
Section
1
ROLLER CLEANING
& HEAD CLENAING
CIM-XXX SERIES
SERVICE MANUAL
MAINTENANCE
PROCESS
3
BELT TENSION
PAGE
4 OF 51
DATE
2008.02.25
Maintenance method
Wet CLEANING CARD with 4 ~ 7 drop of alcohol, And then
wipe the header and roller with cleaning card
in 5 ~ 6 times by moving the roller.
☞ Clean every day or every week according to the pollution
rate and the movement status of the roller.
☞ HEAD CLEANING CARD
(1) Product name : HEAD CLEANING CARD
(2) Company name : CLEAN TEAM CO.
(3) Address : CLEAN TEAM COMPANY , 3655 PACIFIC HIGHWAY
SAN DIEGO , CA 92101
(4) TEL : (619) 299-9000
(800) 888-8830
FAX : (619) 299-1462
(5) HOME PAGE : http://cleanteam.com/
2
REV
B
As the picture on the right, Loosen the screws with the
plus screw driver. And push up or pull down the motor along
the arrows. And then tighten the screws.
☞ it does require maintenance every week or every month
according to the belt tension.
Parts replacement 1. All assembly is in reverse order of disassembly.
2. Please be sure to take care of "※ NOTE" mark.
CLEANING
CARD
ROLLER
SCREW
SCREW