Download Micro-Tech - Hoferick Engineering GmbH

Transcript
Micro-Tech 3102
Default:
0 sec
Min:
0 sec
Max:
32767
Pressing the DETAIL key makes it possible to select the batch options without entering the label.
The label number is computed automatically by the instrument.
The following scrolls are displayed in this case.
Only for REFILL type components, it defines how to refill function works. If FORCED, a refill
starts independently by the actual weight on the scale. If AUTO, the refill cycle starts each time
before doing a DISCH BATCH component if the set-point of this component is higher than the
actual weight on the scale.
- RECIPE _____ LIN ____
Refill mode
> Auto <
CHOICE ENTER
Protection: OPERATOR
Default:
AUTO
Selections:: AUTO, FORCED
The next two scrolls are diaplayed only if component is BATCH DISCHARGE or DISCHARGE
type.
The first scroll defines how to check the DISCHARGE INTERLOCK input.
- RECIPE _____ LIN ____
Disch. interlock
> Not used <
CHOICE ENTER
Protection: OPERATOR
Default:
NOT USED
Selections:: NOT USED, PULSE, STABLE
The second scroll defines how to handle the END DISCHARGE output.
- RECIPE _____ LIN ____
End discharge
> Not used <
CHOICE ENTER
Protection: OPERATOR
Default:
NOT USED
Selections:: NOT USED, PULSE, STABLE
The next three scrolls are displayed only if a component is BATCH CHARGE or REFILL type.
The first scroll defines how to check the CHARGE INTERLOCK input.
- RECIPE _____ LIN ____
Charge interlock
> Not used <
CHOICE ENTER
3-19
Protection: OPERATOR
REC 4192 Rev B
Thermo Fisher Scientific