Download AquaCat Owners Manual

TROUBLESHOOTING
(CONT.)
t
III. PUMP:
(See Cat Pump Manual
Section 10)FAILS
HIGH PRESSURE
for Charts,
PUMP
Terminology
& Number
Code
1. Chemical build-up due to non-compliance with standard operating
(Start-up & Shut-down).
procedures.
TO OPERATE:
2. Damaged
or worn
3. Damaged
cylinder
4.
Damaged
5. Debris
spring
piston
cup piston
“O” rings
“O” rings
lodged in discharge
assembly
valve
WATER
IN OIL:
6. Damaged piston rod seal, washer or
Replace
“O” ring (piston sleeve).
or rebuild
WATER
LEAK:
7.
Cracked
(hairline)
charge manifolds
8. Loose
Iv.
VIBIWTION:
MISALIGNMENT
DIRECT
DRIVE
or damaged
inlet
fittings
or disor elbow
COUPLER
Tighten bolts and Allen screws.
(Also Allen screws that secure
Coupler to shafts of engine and
Blower) .
:
Due to loose bolts
Blower mounts.
on engine
or