Download ProForceR Debris Blower

Transcript
General Information
This Chapter gives information about specifications,
maintenance, troubleshooting, testing and repair of the
gasoline engine used in the ProForce Debris Blower.
ment is explained. However, the cost of the test equipment and the specialized nature of some repairs may
dictate that the work be done at an engine repair facility.
Most repairs and adjustments require tools which are
commonly available in many service shops. Special
tools are described in the KOHLER COMMAND ENGINE SERVICE MANUAL that is included at the end of
this Chapter. The use of some specialized test equip-
Service and repair parts for Kohler engines are supplied
through your local Toro distributor. Be prepared to provide your distributor with the Toro model and serial number.
Operator’s Manual
Engine
The Operator’s Manual provides information regarding
the operation, general maintenance and maintenance
intervals for your ProForce Debris Blower machine. Refer to the Operator’s Manual for additional information
when servicing the machine.
Electrical Power
Electrical power to ProForce Debris Blower components is controlled by the Remote Control Module. To
make sure that machine operation does not occur unexpectedly, disconnect the negative battery cable from the
battery before performing any machine service (see
Battery Service in the Service and Repairs section of
Chapter 4 - Electrical System).
Reattach the disconnected negative battery cable as
the last step in any repair. Secure cable with flange nut.
Torque nut from 10 to 15 ft- lb (14 to 20 N- m).
ProForce Debris Blower
Page 3 - 3 Rev. C
Engine