Download Philips OneSpace luminous ceiling

Lower the panel to approx. 60cm above floor level in a 60 degree position, and place the two centre double crossbar clips at
the original positions of the single crossbar clips as indicated in Figure 16.
Figure 16: Position of the two centre double crossbar clips (at the original
positions of the single crossbar clips).
Connect each back cover to the next as shown (blue colored strip indicates the integrated velcro) as indicated in Figure 17.
Figure 17: Connect each backcover to the next.
Figure 18: The connector brackets are hidden behind the back cover.
Philips OneSpace luminous ceiling panel installation manual March 2014
15