Download SERVICE MANUAL - MiniDisc Community Page

MZ-RH10
SERVICE MANUAL
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Tourist Model
Ver. 1.0 2005.03
US and foreign patents licensed from Dolby Laboratories.
Model Name Using Similar Mechanism
NEW
• SonicStage is trademark or registered trademark of Sony Corporation.
• MD Simple Burner, OpenMG, “MagicGate”, “MagicGate Memory
Stick”, “Memory Stick”, Hi-MD, Net MD, ATRAC, ATRAC3,
ATRAC3plus and their logos are trademarks of Sony Corporation.
• Microsoft, Windows, Windows NT and Windows Media are trademarks
or registered trademarks of Microsoft Corporation in the United States
and /or other countries.
• IBM and PC/AT are registered trademarks of International Business
Machines Corporation.
• Macintosh is a trademark of Apple Computer, Inc. in the United States
and/ or other countries.
• Pentium is a trademark or registered trademark of Intel Corporation.
• All other trademarks and registered trademarks are trademarks or
registered trademarks of their respective holders.
• ™ and ® marks are omitted in this manual.
• CD and music-related data from Gracenote, Inc., copyright © 20002004 Gracenote. Gracenote CDDB® Client Software, copyright 20002004 Gracenote. This product and service may practice one or more of
the following U.S. Patents: #5,987,525; #6,061,680; #6,154,773,
#6,161,132, #6,230,192, #6,230,207, #6,240,459, #6,330,593, and other
patents issued or pending. Services supplied and/or device manufactured
under license for following Open Globe, Inc. United States Patent
6,304,523.
Gracenote is a registered trademarks of Gracenote. The Gracenote logo
and logotype, and the “Powered by Gracenote” logo are trademarks of
Gracenote.
MD Mechanism Type
MT-MZNH900-181J
Optical Pick-up Name
ABX-UJ
SPECIFICATIONS
Audio playing system
MiniDisc digital audio system
Laser diode properties
Material: GaAlAs
Wavelength: λ = 790 nm
Emission duration: continuous
Laser output: less than 44.6 µW
(This output is the value measured at a distance
of 200 mm from the lens surface on the optical
pick-up block with 7 mm aperture.)
– Continued on next page –
Program © 2001, 2002, 2003, 2004, 2005 Sony Corporation
Documentation © 2005 Sony Corporation
PORTABLE MD RECORDER
9-879-560-01
2005C05-1
© 2005.03
Sony Corporation
Personal Audio Group
Published by Sony Engineering Corporation
For other Service and User Manuals, go to www.ManualDepot.com
MZ-RH10
Recording and playback time
Outputs
List of the recording time for each disc
i: stereo mini-jack (dedicated remote control
jack)
When using a disc in Hi-MD mode
Maximum output (DC)
Recording time1)
When recording on the
recorder
Recording
Codec/
mode on the Bit rate
recorder
1GB Hi-MD
disc
80-minute
standard
disc
74-minute
standard
disc
60-minute
standard
disc
PCM
Linear PCM/
1.4Mbps
1 hour and 34
minutes
28 minutes
26 minutes
21 minutes
Hi-SP
ATRAC3plus/
256kbps
7 hours and 55 2 hours and 20 2 hours and
minutes
minutes
10 minutes
1 hour and 40
minutes
Hi-LP
ATRAC3plus/
64kbps
34 hours
7 hours and
40 minutes
10 hours and
10 minutes
9 hours and
20 minutes
Recording time1)2)
When transferring from the
computer
Codec/Bit rate
1GB Hi-MD
disc
80-minute
standard
disc
74-minute
standard
disc
60-minute
standard
disc
Linear PCM/1.4Mbps
1 hour and 34
minutes
28 minutes
26 minutes
21 minutes
Headphones:
2.8 mW + 2.8 mW (16 Ω) (European
models)
5 mW + 5 mW (16 Ω) (Other models)
Power requirements
Sony AC Power Adaptor connected at the DC
IN 3V jack:
120 V AC, 60 Hz (Models for USA, Canada,
Mexico and Taiwan)
240 V AC, 50 Hz (Model for Australia)
220 V AC, 50 Hz (Models for China and
Argentine)
100 - 240 V AC, 50/60 Hz (Other models)
The recorder:
Nickel metal hydride rechargeable battery
NH-14WM 1.2V 1,350 mAh (MIN) Ni-MH
LR6 (size AA) alkaline battery
AC power adaptor DC 3V
ATRAC3plus/256kbps
7 hours and 55 2 hours and 20 2 hours and
minutes
minutes
10 minutes
1 hour and 40
minutes
ATRAC3plus/64kbps
34 hours
10 hours and
10 minutes
9 hours and
20 minutes
7 hours and
40 minutes
ATRAC3plus/ 48 kbps
45 hours
13 hours and
30 minutes
12 hours and 10 hours
30 minutes
ATRAC3/132kbps
16 hours and
30 minutes
4 hours and 50 4 hours and
minutes
30 minutes
3 hours and
40 minutes
ATRAC3/105kbps
20 hours and
40 minutes
6 hours and 10 5 hours and
minutes
40 minutes
4 hours and
40 minutes
ATRAC3/66kbps
32 hours and
40 minutes
9 hours and 50 9 hours
minutes
7 hours and
20 minutes
Battery life1)
MP3/128kbps
17 hours
5 hours
3 hours and
30 minutes
When recording continuously in Hi-MD mode
4 hours and
30 minutes
1) Approximate
time
2) When transferring 4-minute tracks
Operating temperature
+5°C (+41°F) to +35°C (+95°F)
Battery operation time2)
2) Measured
in accordance with JEITA.
(Unit: approx.hours)(JEITA2))
Disc type
Batteries
Linear PCM
Hi-SP
Hi-LP
1GB Hi-MD disc
NH-14WM3)
5.5
7.5
8.5
LR64)
2
3
3
NH-14WM + LR6
8
11.5
12.5
NH-14WM
5
7.5
8.5
LR6
4
6
6.5
NH-14WM + LR6
9.5
14.5
16.5
When using a disc in MD mode
You cannot record in MD mode on this recorder.
Recording time1)2)
When transferring from the
computer
Codec/Bit rate
80-minute
standard disc
74-minute
60-minute
standard disc standard disc
ATRAC(stereo)/292kbps
80 minutes
74 minutes
60 minutes
ATRAC3/132, 105kbps
2 hours and 40
minutes
2 hours and 28
minutes
2 hours
ATRAC3/66kbps
5 hours and 20
minutes
4 hours and 56
minutes
4 hours
60/74/80-minute
standard disc
1) Measured
with “EL Light” is set to “Auto Off” (page 58).
2) Measured in accordance with the JEITA (Japan Electronics and Information Technology Industries
Association) standard.
3) When using a 100% fully charged nickel metal hydride rechargeable battery
4) When using a Sony LR6 (size AA) alkaline dry battery (produced in Japan)
When playing continuously in Hi-MD mode
(Unit: approx.hours)(JEITA)
1) Approximate
time
2) When transferring 4-minute tracks
Revolutions
Disc type
Batteries
Linear
PCM
Hi-SP
Hi-LP
MP31)
1GB Hi-MD
disc
NH-14WM
9
12.5
14.5
13
350 rpm to 3,000 rpm (CLV)
Error correction
Hi-MD:
LDC (Long Distance Code)/BIS (Burst
Indicator Subcode)
MD:
ACIRC (Advanced Cross Interleave Reed
Solomon Code)
LR6
9.5
13.5
15.5
14.5
NH-14WM + LR6
20
28.5
33
30
60/74/80-minute NH-14WM
standard disc
LR6
NH-14WM + LR6
1) Tracks
7.5
12
15
13.5
8
13
16
14.5
17
27.5
34
30.5
transferred at 128 kbps
When playing continuously in MD mode
(Unit: approx.hours)(JEITA)
Sampling frequency
Disc type
Batteries
SP
LP2
LP4
44.1 kHz
60/74/80-minute
standard disc
NH-14WM
13.5
15
15.5
Sampling rate converter
Optical (digital) input: 32 kHz/44.1 kHz/
48 kHz
Audio formats supported by this
recorder
Recording:
Linear PCM (44.1 kHz/16 bit)
ATRAC3plus (Adaptive TRansform
Acoustic Coding 3 plus) (Hi-SP/Hi-LP)
Playback:
Linear PCM
ATRAC3plus
ATRAC3
ATRAC
MP3 (MPEG-1 Audio Layer-3/Sampling
frequency 44.1 kHz/Bit rate 32 - 320 kbps
(constant/variable bit rate))
Modulation system
Hi-MD:
1-7RLL (Run Length Limited)/PRML
(Partial Response Maximum Likelihood)
MD:
EFM (Eight to Fourteen Modulation)
Frequency response
20 to 20,000 Hz ± 3 dB
Inputs1)
MIC: stereo mini-jack
(minimum input level 0.13 mV)
Line in:
stereo mini-jack for analog input
(minimum input level 49 mV)
optical (digital) mini-jack for optical
(digital) input
1) The LINE IN (OPT) jack is used to connect
either a digital (optical) cable or a line
(analog) cable.
2
LR6
16
17.5
18.5
NH-14WM + LR6
32
35.5
37
Dimensions
Approx. 80.2 × 18.9 × 84.1 mm (w/h/d)
(31/4 × 3/4 × 33/8 in.) (excluding projecting parts
and controls)
Mass
Approx. 120 g (4.2 oz) (the recorder only)
Approx. 147 g (5.2 oz) (including the
rechargeable battery)
Supplied accessories
AC power adaptor
Remote control
Earphones
Dedicated USB cable
NH-14WM Nickel metal hydride rechargeable battery
Battery carrying case
Dry battery case
Optical cable (except US and Canadian models)
Clamp filters (small-size)
CD-ROM (SonicStage/MD Simple Burner)
Carrying pouch
* Do not play a CD-ROM on an audio CD player.
Design and specifications are subject to change
without notice.
MZ-RH10
TABLE OF CONTENTS
On power sources
• For use in your house: Use the AC power
adaptor supplied with this recorder. Do not
use any other AC power adaptor since it may
cause the recorder to malfunction.
Polarity of the plug
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
1.
SERVICING NOTES ............................................... 4
2.
GENERAL ................................................................... 5
3.
DISASSEMBLY
3-1.
3-2.
3-3.
3-4.
3-5.
3-6.
3-7.
3-8.
3-9.
Disassembly Flow ........................................................... 6
Case (Lower) Block ......................................................... 6
Main Board ...................................................................... 7
Panel (Upper) Section ..................................................... 7
Mechanism Deck (MT-MZNH900-181J) ........................ 8
Battery Case Block .......................................................... 8
Gear (BSA), Gear (SB) ................................................... 9
OP Service Assy .............................................................. 9
DC Motor SSM18D/C-NP (Spindle) (M701),
DC Motor (Sled) (M702),
DC Motor Unit (Over Write Head Up/Down) (M703) ... 10
3-10. Holder Assy ..................................................................... 10
3-11. Position of Ferrite Core .................................................. 11
4.
TEST MODE .............................................................. 12
5.
ELECTRICAL ADJUSTMENTS .......................... 16
6.
DIAGRAMS
6-1.
6-2.
6-3.
6-4.
6-5.
6-6.
6-7.
6-8.
6-9.
6-10.
6-11.
6-12.
6-13.
Block Diagram – MD SERVO Section – ......................
Block Diagram – AUDIO Section – ..............................
Block Diagram – POWER SUPPLY Section – .............
Schematic Diagram – MAIN Board (1/9) – ...................
Schematic Diagram – MAIN Board (2/9) – ...................
Schematic Diagram – MAIN Board (3/9) – ...................
Schematic Diagram – MAIN Board (4/9) – ...................
Schematic Diagram – MAIN Board (5/9) – ...................
Schematic Diagram – MAIN Board (6/9) – ...................
Schematic Diagram – MAIN Board (7/9) – ...................
Schematic Diagram – MAIN Board (8/9) – ...................
Schematic Diagram – MAIN Board (9/9) – ...................
Printed Wiring Board
– MAIN Board (Component Side) – ...............................
6-14. Printed Wiring Board
– MAIN Board (Conductor Side) – .................................
21
22
23
25
26
27
28
29
30
31
32
33
34
35
7.
EXPLODED VIEWS
7-1.
7-2.
7-3.
7-4.
Case (Lower) Section ......................................................
Panel (Upper) Section .....................................................
Chassis Section ................................................................
Mechanism Deck Section (MT-MZNH900-181J) ...........
8.
ELECTRICAL PARTS LIST ................................ 52
48
49
50
51
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS
QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT
DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
3
MZ-RH10
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
OPERATION CHECK WHEN THE MAIN BOARD IS
REMOVED
In making an operation check with the MAIN board removed from
the set, short the SL894 of the MAIN board with the solder before
starting the operation check.
Note: Be sure to remove the solder used for shortcircuit after the repaire
completed.
– MAIN BOARD (Conductor Side) –
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pickup block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
SL894
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
NOTES ON REPLACEMENT OF CSP (CHIP SIZE
PACKAGE) IC
Replacement of MM1690NCBE (IC401), SN761059AZQLR
(IC501), SC901585VAR2 (IC601) and CXD2681-225GG (IC801)
used in this set requires a special tool.
Providing the required system environment
System requirements
The following system environment is required in order to use the SonicStage Ver. 3.0/MD
Simple Burner Ver. 2.0 software for the MD Walkman.
Computer
IBM PC/AT or Compatible
• CPU: Pentium III 450 MHz or higher
• Hard disk drive space: 200 MB or more (1.5 GB or more is
recommended) (The amount space will vary according to Windows
version and the number of music files stored on the hard disk.)
• RAM: 128 MB or more
Others
• CD drive (capable of digital playback by WDM) (A CD-R/RW drive
is necessary for CD writing)
• Sound Board
• USB port
Operating
System
Factory installed:
Windows XP Media Center Edition 2005/Windows XP Media Center
Edition 2004/Windows XP Media Center Edition/Windows XP
Professional/Windows XP Home Edition/Windows 2000 Professional/
Windows Millennium Edition/Windows 98 Second Edition
Display
High Color (16bit) or higher, 800 u 600 dots or better (1024 u 768 dots
or better is recommended)
Others
• Internet access: for Web registration, EMD services and CDDB
• Windows Media Player (version 7.0 or higher) installed for playing
WMA files
This software is not supported by the following environments:
• OSs other than the indicated above
• Personally constructed PCs or operating systems
• An environment that is an upgrade of the original manufacturer-installed operating system
• Multi-boot environment
• Multi-monitor environment
• Macintosh
Notes
• We do not ensure trouble-free operation on all computers that satisfy the system requirements.
• The NTFS format of Windows XP/Windows 2000 Professional can be used only with the standard
(factory) settings.
• For Windows 2000 Professional users, install Service Pack 3 or later version before using the
software.
• We do not ensure trouble-free operation of the system suspend, sleep, or hibernation function on all
computers.
4
MZ-RH10
SECTION 2
GENERAL
This section is extracted from
instruction manual.
Looking at controls
The recorder
The display window of the recorder
A MIC (PLUG IN POWER) jack1)
B LINE IN (OPT) jack
K i (earphones) jack
L REC(+N)/T MARK button
C HOLD switch
Slide the switch in the direction of the
arrow to disable the buttons on the
recorder. To prevent the buttons from
being accidentally operated when you
carry the recorder, use this function.
M •SEARCH/•LIGHT/ MENU
button2)
N x (stop) • CANCEL/CHG button
O DC IN 3V jack
P
USB cable connecting jack
Q The cover of the
USB cable
connecting jack
R Terminals for attaching dry battery
case
D
E
F
G
Display window
OPEN switch
Jog dial (N (play)/ENT)
. (AMS, fast rewind), > (AMS,
fast forward) button
H Battery compartment
I X (pause) button
J VOL (volume) +1), – button
1) There are tactile dots beside the VOL + button
and the MIC (PLUG IN POWER) jack.
indicates a function that requires a slight
press of the button.
indicates a function
that requires pressing the button for 2 seconds
or more.
2) •
A Operating condition indication display
area
Displays the indications of each
operating condition.
x: stop
N: play
X: pause
m: fast rewind
M: fast forward
., >: AMS
: record/record pause
B Selected operating condition display
area
Displays the operating mode, play
mode, or selected menu item, etc.
C Battery indication
Shows the approximate remaining
battery power. If the batteries are
weak, the indication becomes empty
and starts flashing.
D Track number and group number
display area
Displays the track number or group
number.
E Text information display area
Displays titles, menu items, error
messages, etc. Titles are preceded by
the following icons.
: track name
: artist name*
: album name*
: group name
: disc name
* Appears only for discs used in Hi-MD mode.
F Time display area
Displays the elapsed time, remaining
time of the track or disc, etc.
The earphones with a remote control
A
B
E
C
F
D
A VOL (volume) +, – control
B HOLD switch
Slide the switch in the direction of the
arrow to disable the buttons on the
remote control. To prevent the buttons
from being accidentally operated
when you carry the recorder, use this
function.
G
C
D
E
F
G
Clip
(group) +, – button
NX (play, pause) button
x (stop) button
. (AMS, fast rewind), > (AMS,
fast forward) button
5
MZ-RH10
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
Note 1: The process described in
can be performed in any order.
Note 2: Without completing the process described in
, the next process can not be performed.
SET
3-2. CASE (LOWER) BLOCK
(Page 6)
3-3. MAIN BOARD
(Page 7)
3-4. PANEL (UPPER) BLOCK
(Page 7)
3-5. MECHANISM DECK (MT-MZNH900-181J)
(Page 8)
3-7. GEAR (BSA), GEAR (SB)
(Page 9)
3-6. BATTERY CASE BLOCK
(Page 8)
3-8. OP SERVICE ASSY
(Page 9)
3-9. DC MOTOR SSM18D/C-NP (SPINDLE) (M701),
DC MOTOR (SLED) (M702),
DC MOTOR UNIT (OVER WRITE HEAD UP/DOWN) (M703)
(Page 10)
3-10. HOLDER ASSY
(Page 10)
Note: Follow the disassembly procedure in the numerical order given.
3-2. CASE (LOWER) BLOCK
S895
knob (hold)
5 two screws (M1.4)
7 screw (M1.4)
4 screw (M1.4)
6 Slide the knob (open)
in the direction of arrow.
8 case (lower)
block
6
3 screw
(M1.4)
2 battery lid assy
1 Open the battery lid assy
in the direction of arrow.
MZ-RH10
3-3. MAIN BOARD
3 flexible board
(CN471)
1 Remove two solders.
5
7 MAIN board
2 flexible board
(CN701)
6 flexible board
(CN501)
1 Remove two solders.
4 five toothed lock screws
3-4. PANEL (UPPER) SECTION
6 panel (upper) section
5 claw
3 two screws (M1.4)
1 flexible board
(CN471)
B
4 torsion spring (L)
A
2 Slide the open slider in the direction
of arrow A and open the panel (upper)
section in the direction of arrow B.
7
MZ-RH10
3-5. MECHANISM DECK (MT-MZNH900-181J)
1 two step screws (MD)
2 mechanism
(MT-MZNH900-181J)
3-6. BATTERY CASE BLOCK
2 MD standard pin
3 two screws
1 claw
7 battery case block
5 tension spring (lock)
6 open slider
8
4 screw (M1.4)
MZ-RH10
3-7. GEAR (BSA), GEAR (SB)
1 self tap screw
2 thrust retainer spring
3 washer (0.8-2.5)
5 gear (SB)
4 gear (BSA)
3-8. OP SERVICE ASSY
1 Lead screw block assy is turned
and it removes from OP service assy.
2 OP service assy
9
MZ-RH10
3-9. DC MOTOR SSM18D/C-NP (SPINDLE) (M701), DC MOTOR (SLED) (M702),
DC MOTOR UNIT (OVER WRITE HEAD UP/DOWN) (M703)
3 two screws (M1.4)
2 Remove two solders of flexible board.
4 DC motor (sled)
(M702)
1 Remove four solders of flexible board.
8 self tap screw
6 three self tap screws
9 DC motor unit
(over write head up/down)
(M703)
7 DC motor SSM18D/C-NP
(spindle) (M701)
5 motor base assy
3-10. HOLDER ASSY
4 Remove the holder assy
to the direction of the arrow A.
2 boss
3 Open the holder assy.
1 boss
A
10
MZ-RH10
3-11. POSITION OF FERRITE CORE
-AC ADAPTORA cable is rolled twice without twisting it.
4cm
clamp filter (ferrite core)
(Part No. 1-400-878-11)
-USB CABLEA cable is rolled once.
To come to the USB mark side of the connenctor,
the cable is rolled once.
USB A type
USB mini B type
1cm
4cm
clamp filter (ferrite core)
(Part No. 1-400-878-11)
(except tourist model)
-REMOTE CONTROL UNITclamp filter (ferrite core)
(Part No. 1-400-877-11)
(US, canadian models)
A cable is rolled once.
4cm
11
MZ-RH10
SECTION 4
TEST MODE
OUTLINE
Remote commander LCD display
Operation in the test mode is performed with the set. A key having
no particular description in the text, indicates a set key. Also, For
the LCD display, the LCD on the remote commander is shown.
(The running system is displayed in set EL instead of the disk mark)
F 1SHUFPGM SOUND
V-SUR
888
8
All lit
Remote commander LCD display
(all off)
(all lit)
(inner rotation, outer lit)
(inner lit, outer off)
(inner off, outer lit)
Set EL display
off
x
B
.
>
All off
002 V1.000
1. OPERATION IN SETTING THE TEST MODE
• When the test mode becomes active, first the Display Check
mode is selected.
• Other mode can be selected from the Display Check mode.
• When the test mode is set, the LCD repeats the following
display.
• When the x key is pressed and hold down, the display at that
time is held so that display can be checked.
Microcomputer
version display
2. CONFIGURATION OF THE TEST MODE
Flow of the test mode:
Display Check Mode
Display check mode:
002 V1.000
Version display → All lit
→ All off → Version display...
Set EL display
[VOL +] key
Manual Mode
000 Manual
x key
[VOL --] key
Overall Adjustment Mode
000 AdjF**
x key
[SEARCH/MENU] key
All lit
Key Check Mode
110
10
Open the lid
> key
Self-Diagnosis Result Display Mode
000 1 0000
x key
N/ENT key
Sound Skip Check Result
Display Mode (Play)
000 P00r00
x key
All off
[REC/T MARK] key
Sound Skip Check Result
Display Mode (REC)
000 p00R00
x key
002[80**]
Ver 1.000
BEr******
[SEARCH/MENU] key
(press a few
Key Count Mode
seconds)
000 MENU 000
Remote commander
[DISPLAY] key
(press a few seconds)
Microcomputer
version display
12
(Not used in servicing)
MZ-RH10
3. MANUAL MODE
This is mode to adjust or check the operation of the set by function.
Operation of The Manual Mode
1. Enter the test mode (Display Check mode).
2. Press the [VOL+] key to activate the Manual mode where the
LCD displays as shown below.
Display of the remote commander
5. The display changes a shown below each time the
[SEARCH/MENU] key is pressed.
• Item Title Display
Remote commander LCD display
XXX * * * * * * # #
adjusted value
item number
item title
000 Manual
• Address & Adjusted Value Display
Number of 1000th place
(000 to 009)
Remote commander LCD display
XXX * * * S # #
3. During Manual mode, the optical pick-up moves outward or
inward while the > or . key is pressed for several
seconds respectively.
4. Each test item is assigned with a four-digit item number; 1000th
place is a top item, 100th place is a major item, 10th place is a
medium item, and unit place is a minor item.
Flow of manual mode operation:
Top item switching
> key
x key
address
• Jitter Value & Adjusted Value Display
Remote commander LCD display
XXX * * * J # #
item number
[VOL +] key: 1000th place of item
number increase.
[VOL --] key: 1000th place of item
number decrease.
adjusted value
item number
adjusted value
jitter value
• Block/Bite Error Value & Adjusted Value Display
Remote commander LCD display
XXX * * * B # #
Major item switching
> key
x key
Medium item switching
> key
x key
Minor item switching
[VOL +] key: 100th place of item
number increase.
[VOL --] key: 100th place of item
number decrease.
[VOL +] key: 10th place of item
number increase.
[VOL --] key: 10th place of item
number decrease.
> key:
. key:
1st place of item
number increase.
1st place of item
number decrease.
Adjusted value variation
[VOL +] key: Increases the adjusted
value.
[VOL --] key: Decreases the adjusted
value.
item number
• Bite Error LPF Value & Adjusted Value Display *1)
Remote commander LCD display
XXX * * * L # #
item number
Remote commander [ --]key:
Adjusted value is written.
adjusted value
bite error LPF value
• CEMAX Value & Adjusted Value Display *1)
Remote commander LCD display
XXX * * * C # #
item number
adjusted value
CEMAX value
• ADIP Error Value & Adjusted Value Display
Remote commander LCD display
XXX * * * A # #
Adjusted value write
Set [X]key:
adjusted value
block/bite error value
item number
adjusted value
ADIP error value
• Focus Drive Value & Adjusted Value Display
Remote commander LCD display
XXX * * * F # #
item number
adjusted value
focus drive voltage value
*1) It is skipped from the item number 5000 less than 8000.
6. To release the Manual mode, press the
Display Check mode.
x
key to return to the
13
MZ-RH10
4. OVERALL ADJUSTMENT MODE
4-1. Operation of The Overall Adjustment Mode
1. Enter the test mode (Display Check mode).
2. Press the [VOL--] key to activate the Overall Adjustment mode
where the LCD displays as shown below.
Display of the remote commander
000 AdjF**
Disc mark:
Lit the inner segments: Completed the power supply adjustment.
Lit the outer segments: Completed the check of charge function.
“**”:
If “DF” or “FF” is displayed, it mean that completed the servo
overall adjustment.
3. To release the Overall Adjustment mode, press the
return to the Display Check mode.
x
Flow of overall adjustment mode:
Overall Adjustment Mode
000 AdjF**
CD Overall Adjustment Mode
. key
*** CD Run
x key
MD1 Overall Adjustment Mode
> key
*** MD1Run
x key
Hi-MD3 Overall Adjustment Mode
[VOL +] key
*** HM3Run
x key
Stray Light Offset Overall
Adjustment Mode
[VOL --] key
*** OfsRun
x key
000 OPChk
x key
[REC/T MARK] key
Initialize The Adjustment Values
911 ResOK?
14
Display
Close!
DfDis!
NoChg!
NotCD!
NotM1!
NotH3!
****NG
Description
Dose not close the lid
Unsuitableness disc was inserted
Does not finish the check of charge function yet
Does not complete the CD Overall adjustment before the
MD1 Overall adjustment
Does not complete the MD1 Overall adjustment before the
Hi-MD3 Overall adjustment
Does not complete the Hi-MD3 Overall adjustment before
the Stray Light Offset Overall adjustment
Error of item number “****”
5. SELF-DIAGNOSIS RESULT DISPLAY MODE
This set uses the self-diagnostic function system in which if an error
occurred during the recording or playing, the mechanism control
block and the power supply control block in the microcomputer
detect it and record its cause as history in the nonvolatile memory.
By checking this history in the test mode, you can analyze a fault
and determine its location.
Total recording time is recorded as a guideline of how long the
optical pick-up has been used, and by comparing it with the total
recording time at the time when an error occurred in the selfdiagnosis result display mode, you can determine when the error
occurred.
Clear the total recording time, if the optical pick-up was replaced.
5-1. Operation of The Self-Diagnosis Result Display
Mode
1. Enter the test mode (Display Check mode).
2. Press the > key to activate the Self-Diagnosis Result Display
mode where the LCD displays as shown below.
Display of the remote commander
*** $$####
[SEARCH/MENU] Optical Pick-up Operation
Check Mode
key
x key
key and
4-2. Error Message in The Overall Adjustment Mode
In the Overall Adjustment mode, if an error occurred, it displays as
following table.
rotation
“***” : Error display code
“$$”
: Error rivision history code
“####” : Addition information when error occurs
3. To release the Self-Diagnosis Result Display mode, press the x key
and return to the Display Check mode.
MZ-RH10
Flow of Self-diagnosis Result Display mode operation:
The first error
*** 1 ####
[VOL --] key
[VOL +] key
The last error
*** N ####
One error before
the last
*** N1####
[VOL --] key
[VOL +] key
Two error before
the last
*** N2####
[VOL --] key
[VOL +] key
*** R_####
[VOL +] key
Operation of The Key Check Mode
1. Enter the test mode (Display Check mode).
2. Press the [SEARCH/MENU] key to activate the Key Check mode
where the LCD displays as shown below.
Display of the remote commander
[VOL --] key
[VOL +] key
6. KEY CHECK MODE
This mode is used for key check.
Total recording time
110 $$$$$$ ##
“$$$$$$” : Pressed key name.
When remote commander key is pressed, display becomes
as “r$$$$$”.
When the jog dial is turned, it displays “JOG+ X” or “JOGX” (“X” is number of 1 to 3). If the jog dial is turned four
click, it displays “JOG+OK” or “JOG-OK”.
“##”
: Key voltage of remote commander. (Hexadecimal number)
[VOL --] key
3. When all keys check is OK on the main unit, it displays as
follows.
5-2. Error Code of The Self-Diagnosis Result Display
Mode
Error display code
000
001
002
003
004
005
006
007
008
009
012
013
032
033
034
Description
No error
Attempt to access an abnormal address
High temperature detected
Focus error (no change)
Abnormal rotation of disc
Fault of disc discriminate
Error of access loop (no change)
Error of access loop (with change)
Could not read address
Focus error (with change)
Could not read data with SYNC
TOC address data error
Focus error, ABCD offset error
Tracking error, offset error
X1 tracking error, Tracking error, offset error
Display of the remote commander
888 SET OK ##
When all keys check is OK on the remote commander, it
displays as follows.
Display of the remote commander
888 RMC OK ##
4. When all keys check are OK both the main unit and the remote
commander, it display backs to the Display Check mode
automatically.
5. To release the Key Check mode, open the lid and return to the
Display check mode.
Error display code
Addition information when error occurs
000
0000
001
Illegal cluster specified when error occurs
002 to 034
Total recording time when erroe occurs
5-3. Clear The Total Recording Time
After replacing the optical pick-up, clear the total recording time.
1. Enter the test mode (Display Check mode).
2. Press the > key to activate the Self-Diagnosis Result Display
mode.
3. Press the [VOL--] key once to display the total recording time
indication.
4. Press the X key on the set or
– key on the remote
commander and display “ClrOK?”.
5. Press the X key on the set or
– key on the remote
commander again to display “RecT 0” and clear the total
recording time.
15
MZ-RH10
SECTION 5
ELECTRICAL ADJUSTMENTS
1. PRECAUTIONS FOR ADJUSTMENT
1. Adjustment must be done in the test mode only. After adjusting,
release the test mode. A key having no particular description
in the text, indicates a set key. Also, for the LCD display, the
LCD on the remote commander is shown.
2. Use the following tools and measuring instruments.
• Digital multi meter
• Regulated dc power supply (two sets)
• Ampere meter
• Laser power meter
• CD adjustment disc TDYS-1 (Part No. : 4-963-646-01)
• MD1/HiMD1 hybrid adjustment disc MDW-74/GA2
• Hi-MD3 adjustment disc HMD1GSDJ
(Part No. : 8-892-388-38) *1
• Remote commander in accessories (with LCD)
• AC adapter in accessories
*1) Hi-MD3 adjustment disc (HMD1GSDJ) is consumable.
Therefore if it is used 400 times, exchange it for a new.
2. ADJUSTMENT SEQUENCE
Adjustment must be done with the following order.
Adjustment order:
1. Entering the test mode
Note: Enter the test mode with a key.
2.
3.
4.
5.
6.
7.
8.
9.
Initialize the adjustment value
Power supply voltage adjustment
Charge function check
Laser power check
Setting the adjustment values
Servo Overall adjustment
Resume clear
Releasing the test mode
3. ADJUSTMENT OF THE EACH ITEM
3-1. Initialize The Adjustment Value
Procedure:
1. In the test mode (Display Check mode), press the [VOL--] key
to enter the Overall adjustment mode.
2. Press the [REC/T MARK] key and display “911 ResOK?”.
– key on the remote
3. Press the X key on the set or
commander to display “911 Reset!” and initialize the
adjustment values.
4. Press the x key and back to Display Check mode.
3-2. Power Supply Voltage Adjustment
Adjustment must be done with the following order.
3-2-1. Setting
Procedure:
1. Apply the voltage of 1.2 V to the battery terminals, and enter
the test mode (Display Check mode).
2. Press the [VOL+] key to enter the Manual mode.
3. Press the [VOL+] key twice to display as follows.
Display of the remote commander
002 POWER
16
4. Press the > key once, press the [VOL+] key once, and press
the > key once again to display as follows.
Display of the remote commander
210 PwrAdj
5. Repeat the next procedures (3-2-2. PwrAdj Adjustments), and
adjust all contents of “table 3-2-1. PwrAdj Specifications”.
3-2-2. PwrAdj adjustments
Repeat the following procedures and adjust all contents of “table 32-1. PwrAdj Specifications”.
Example Display (Item No. 2211)
211 VC1
**
adjustment value (hexadecimal)
Procedure:
1. Connect the digital multi meter to measuring point (refer to
the following table) and CL433 (GND).
2. Press the > key to change the item numberr to 2211.
3. Adjust with [VOL+]/[VOL--] keys so that the value of digital
multi meter becomes specification value.
4. Press the X key on the set or
– key on the remote
commander to write the adjusted value. (Shifts to the next
item automatically)
5. Repeat adjustment from step 3 until item number 2233.
ItemNo.
2211
2212
2213
2214
2215
2216
2217
2218
2219
2221
2222
2223
2224
2225
2226
2227
Display
211 VC1 **
212 VC1H N **
213 VC2 **
214 DDC3 L **
215 DDC3 H **
216 REG1 L **
217 REG1 H **
218 REG2 1 **
219 REG2 2 **
221 REG2 3 **
222 REG2 4 **
223 REG3 **
224 VREC 1 **
225 VREC 2 **
226 VREC 3 **
227 VREC 4 **
2228
2229
2231
2232
2233
228 VREC 5 **
229 VREC 6 **
231 VREC 7 **
232 VREC 8 **
233 VREC 9 **
Specification value Measuring point
2.05V + 0.02V
CL8029
2.25V ± 0.01V
CL8029
1.20V + 0.01V
CL8001
3.10V ± 0.015V
CL658
3.10V ± 0.015V
CL658
3.02V ± 0.02V
CL362
3.02V ± 0.02V
CL362
2.275V ± 0.01V
CL518
2.480V ± 0.01V
CL518
2.740V ± 0.01V
CL518
2.985V ± 0.01V
CL518
2.52V ± 0.02V
CL511
0.89V ± 0.02V
CL604
1.08V ± 0.02V
CL604
1.52V ± 0.02V
CL604
2.27V ± 0.02V
CL515
2.97V ± 0.02V
0.94V ± 0.02V
1.28V ± 0.02V
2.57V ± 0.02V
2.57V ± 0.02V
Note1: “**” is adjustment value (hexadecimal number).
Note2: Ground point of all measuring points is CL433.
Note3: Refer to page 17 for adjustment location.
Table 3-2-1. PwrAdj Specifications
CL515
CL604
CL604
CL604
CL604
MZ-RH10
3-2-3. VBsAdj adjustments
Procedure:
1. In the “3-2-2. PwrAdj Adjustments” completed status, display
as follows.
ItemNo.
Display
Specification value Measuring point
2241
241 REG4 **
1.13 V ± 0.01 V
CL8001
2242
242 REG5 **
2.05 V + 0.02 V
CL8029
2243
243 REG6 **
3.30 V ± 0.01 V
CL8055
2244
244 DDC5 L **
2.00 V + 0.02 V
CL935
2245
245 DDC5 H **
1.95 V ± 0.01 V
CL935
Note1: “**” is adjustment value (hexadecimal number).
Note2: Ground point of all adjustment points is CL433.
Display of the remote commander
240 VBsAdj
Table 3-2-2. VBsAdj Specifications
2. Apply the voltage of 5 V to the CL453 and CL460 (GND).
3. Press the > key to change the item number to 2241.
4. Adjust with [VOL+]/[VOL--] keys so that the value of digital
multi meter becomes specification value. (Refer to “table 32-2. VBsAdj Specifications”)
5. Press the X key on the set or
– key on the remote
commander to write the adjusted value.
6. Repeat adjustments to item number 2243 at the same manner
as step 4 to step 5.
7. Select the item number 2244, and turn off the power supply of
battery terminal.
8. Repeat adjustments to item number 2244 and 2245 at the same
manner as step 4 to step 5.
9. Apply the voltage of 1.2 V to the battery terminal again.
10. Turn off the voltage of 5 V to the CL453 and CL460 (GND).
11. Press the x key three times and back to the Display Check
mode.
Adjustment Location:
– MAIN BOARD (Component Side) –
S892
(HALF LOCK)
SL892
S895
CL8001
R8892
CL518
CL511
CL515
R8981
C8893
C634
C539
C564
+
R438
A
R421 R424
K
C519 C523
C528
C536
C537
R423
ECB
C538
C527
C517
BCE
R436
12 16 20 26 32
11 15 19 25 31
24 30
10
23 29
9
8 14 18 22 28
7 13 17 21 27
IC401
∗
+
C426
+ C402
CL8055
C648
8
+ C403
5
1-866-346-
+
C4429
Q401
CL433
(GND)
C406
W401
C4463 K
1
4
11
(11)
A D401
C4464
(CHASSIS)
(BATTERY CASE)
CL453
R432
Q407
D4443
A
K
C653
R6620
R624
D605
L605
DRY BATTERY
SIZE “AA”
(IEC DESIGNATION R6)
1PC. 1.5V
DC IN 3V
+
–
6
5
4
3
2
1
C409
C408
A
2D
1G
1S
D607
R4460
C411
+
CL604
Q602
A
R442 R441
C604
A K
C630
R608
C612
R647 R679
R654 C671
+
C830
R801
R805
D443
+
CL658
8
R625 R6621
C6676
K
K A
L603
D608 K A
C6649 2S
2G
1D
W402
J402
CL460
(GND)
A
+ C909
R629
+ C637
+ C922
D606
A
C4466
CN471
C4458
K A
C4428
C623
+
2D
C6679
K
D457
C622
K
1D
K
C4456
R433
C646
5
IC491
D4442
FB4451
D444 A K
L906
D6615
C4455
FB4452
D4456 C4467
C642
+ C635
1
Q432
5
C641
L601
C627 +
R6622
1G S 2G
4
Q442
S D D
R617
C633 C638 R689
G
D
D
Q403
G D D
R616
33 32
A
S
D
D
L901
R648
R675
5 7 10 14 18 22 25 27 31 30
4 6 9 13 17 21 24 26 28 29
C628
C616 +
Q601
4
D4436
112 3
1 2
1E 1B 2C
C4465
D440
R649
45
41
37
34
C645
C650
R495
C491
R494
A
1
47
43
39
36
D602
K
A
K
C491
A
18
A
3
48
44
40
23
110 111
R6623
D6616
R499
D491
K
R493
C6680
L491
46
42
38
35
R857
R804
R482
C493
R491
+
D803
K A
R802
L802
G
R492
R858
R806
D
53 52
50 49
SL801
R807
C819
Q491
S
R472
C828
92 79 75 71 67 64
95 96 76 72 68 51
99 100
103 104
107 12 16 20
8 11 15 19
K
X801
2C C479
C609
R829
124 125
R860
R823
D613
R854
IC801
∗
+
C675
56 82
90 91
93 94
97 98
101 102
105 106
108 109
Q441
R651
Q433
R401
121 133
123 128
126 127
Q406
R443
R961
36 81
24 175 245 250 267 264 72 71 26 66 51 136 134
64
23
68
298
D601
R422
1C 2B 2E
85 84 82 80 77 73 69 65 62 60 58 57
86 87 83 81 78 74 70 66 63 61 59 56
88 89
55 54
CL935
Q502
R437
1E 1B 2C
L907
R690
C424 +
ECB
C558
C672
R6694
R960
300 291
187 3
219 241 221 247 270 152 69 67 25 70 65 184 196
R878
L608
R425
230 193
178 244
79 61
R813
R513
L505
C636 R693
R678
IC601
∗
R426
240 243
80 234
R8813
FB8803
ECB
Q503
R514
L506
R686
C415
20 261
242 176
180 182
217 222
R6695
R516
C560
C545
C567 +
C412
192 183
135 186
294 1
R515
C552
C533
C4462
1C 2B 2E
R681
225 190
227 189
228 59 226
231 224
185 2
R505
C553
R664
C644
197 229
305 301
191 195
+
C666
R628
R962
292 303
16
153
210
154
164
155
209 171 170 166 157
W403
C554
C530
R687
60
17
163
256 259 214
232 215
19 161
A K
172
203 18
258 260
173 253
257 255
233 235
IC605
4
3
1
R653 C602
K A
213 200
202 212
254 204
5
D614
R814
199 194
R645
296 174 290
C613
302 4
304 207
169
C850
C550
C643
C607
C835
+
307 306
308 309
29
116 34
C525
Q504
C614
45 145 143 144 46
167
295
158 160 142
C516
C511
C515
ECB
C565
+
299 293
42 99
101 141
168 208
R861
C813
R835
287 289
156 201
162 165
C4459
K
288 53
R836
C4485
1
C555
C6674
C846 R841
C845
R473
A
Q471
R519
223 248 262 265 268 271 179 216 218 62 76 73 131 188 320 316 317 315 206 130 129 120 122
249 263 266 269 272 251 252 177 181 75 74 198 205 319 318 314 21 22 55 132 35
1B E 2B
1C
297 285
220 246
R957
R484
R480
R834
C847
FB2251
R489
D471
C802
C822
R312
R366
R365
R361
R810
R868
SL802
57 286
112 32
63 211
VDR8861
R843
C526
R520
284 78
279 5
104
115
48
52 27 140 139 276 274 44 113 14 37 146 149 138
118 111 239 54 277 40 108 107 283 281 147 148 137
31 159
R256
R255
105
33 41
R518
R524
FB807
30 15
R501
R502
C801
282 77
110 106
119 100
C547
C323
C322 C324
C105
R354
F351
R808
C821
114 109
R827
+
1
L806
28 103 13 275 39 43 12 11 95 10 93 91 88 7 8 84 83 311 312 151 150
C361
C370
C364
C354
S DG
R155
R156
FB1151
R151
8
R251
5
C3372
FB3351
R490
4
R478
R352
C352
Q151
Q351
8
1
R356 C381
ECB
S DG
R351
CL8029
+
+
10
FB808
117 102 238 313 273 237 98 96 94 97 92 9 90 89 86 85 87 50 310 6 47 49 38
280 278
58 236
C803
Q352
C154
R811
R812
C805
IC351
R353
A K
C351
R362
R359
C254
L804
+
C838
FB8810
9
2B E 1B
Q251
1
16
+
Q353
C3309
R360
C362 +
1C
CN701
L303
FB802
C552
FB5503
C524
5451 48 45 43 42 40 37 34 31
5552 49 47 44 41 38 36 33 30
5653 50 46
39 35 32 29
1 4 7 11
18 22 25 28
2 5 8 10 13 16 19 21 24 27
3 6 9 12 14 15 17 20 23 26
C521
L803
X802
C318 +
R357
2C
+
C836
+
L503
R525
28
C365
C360
R207
D3305
R307
C3308
+
C314
C367
R526
IC501
∗
+
C557
C8864
C812
22
+
C207
R206
1
21
R358
FB2202
7
C804
C204
FB1102
CL362
C205
C206
FB3302
L502
C520
C556
L504
8
IC301
C104 C106
R107 R106
+
C518
SL894
C407
R309
15
+
SL891
W404
C328
C321
C107
K
C4425
R314
14
C3306
S894
BATTERY
INSERT DETECT
D4435
A
K
4
C513
5
3
R310
C325
C108
1
IC302
C102
C101
+
C327
R103
C201
R101
R203
FB1101
C202
R201
FB2201
R517 C559
C529
C566
C531
C3301
NICKEL METAL HYBRID
RECHARGEABLE BATTERY
NH-14WM
1PC. 1.2V 1400mAh
FB3301
CL604
CL433
(GND)
17
MZ-RH10
3-3. Charge Function Check
Note1: When perform this check, don’t apply a voltage to battery terminals.
Note2: Be sure to disconnect the AC adapter when connecting the resistors.
Doing so with the power supply connected causes a trouble.
3-3-1. Voltage adjustment and checks
Procedure:
1. Connect the digital multi meter to battery terminals.
2. Connect the AC adapter to the set.
3. Enter the test mode (Display Check mode).
4. Press the [VOL+] key to enter the Manual mode.
5. Press the [VOL+] key twice, press the > key once, press the
[VOL+] key once, press the > key once, press the [VOL+]
key three times to display as follows.
3-4. Laser Power Check
Procedure:
1. Enter the test mode (Display Check mode).
2. Press the [VOL+] key to enter the Manual mode.
3. Open the lid and press the . key continuously until the
optical pick-up moves to the most inward track.
4. Press the [VOL--] key once to display as follows.
Display of the remote commander
009 DESIGN
5. Press the > key three times to select the item number 9111
and display as follows.
Display of the remote commander
Display of the remote commander
260 ChrgNi
111 LrefPw **
6. Press the > key to select the item number 2261 and display
as follows.
Display of the remote commander
261 ChgAdj
**
adjustment value (hexadecimal)
7. Adjust with [VOL+]/[VOL--] keys so that the value of digital
multi meter becomes 1.80 ± 0.01V.
8. Press the X key on the set or
– key on the remote
commander to write the adjusted value.
9. Press the > key to select the item number 2262.
10. Confirm that the value of digital multi meter is 1.20 ± 0.024V.
11. Press the > key to select the item number 2263.
12. Confirm that the value of digital multi meter is 2.17 ± 0.05V.
13. Press the x key four times and back to the Display Check
mode.
3-3-2. Ampere checks
Procedure:
1. Connect the 22 ohms resistor (more than 0.1 watts) and ampere
meter to battery terminals.
2. Connect the AC adapter to the set.
3. Enter the test mode (Display Check mode).
4. Press the [VOL+] key to enter the Manual mode.
5. Press the [VOL+] key twice, press the > key once, press the
[VOL+] key once, press the > key once, press the [VOL+]
key three times, press the > key four times to select the
item number 2264.
6. Confirm that the value of ampere meter becomes specification
value. (Refer to “table 3-3-1. Ampere Specifications”)
7. Press the x key four times and back to the Display Check
mode.
8. Cut the power supply and remove the resistor that connected
to the battery terminals.
9. Repeat checks to item number 2267 at the same manner as
step 1 to step 8. ( Refer to “table 3-3-1. Ampere Specifications”
for the kind of the resistor that connected to the battery
terminals at step 1)
6. Set the laser power meter so that the laser beam from the optical
pick-up aims at the objective lens of laser power meter at right
angle. (Confirm it with the disc not inserted)
7. Confirm that the value of laser power meter is 0.860 mW ±
19.2%.
8. Press the > key to select the item number 9112.
9. Confirm that the value of laser power meter is 0.763 mW ±
18.2%.
10. Press the > key to select the item number 9113.
11. Confirm that the value of laser power meter is 6.87 mW ±
12%.
12. Press the x key four times and back to the Display Check
mode.
3-5. Setting The Adjustment Values
3-5-1. Hi-MD3 setting
Preparation:
1. Perform calculation every item based on the data given by the
Hi-MD3 adjustment disc by referring to the following table.
(Round off the value in decimal place)
2. Convert the calculated value into hexadecimal number.
Note: The Hi-MD3 adjustment parameters vary depending on the disc,
and therefore use the parameters of the disc used when performing
the adjustment.
Item No.
0211
(*1)
0212
0213
(*2)
0214
0215
0216
Calculating formula (*3)
Pr_nominal / 0.05
Por / 0.05
Kr × (−100)
Pw_nominal / 0.05
Ppw / 0.05
Kw × (−100)
Prmin / 0.05
Pwmin / 0.05
*1) If the “Pr_nominal” value is indicated, use the “Pr_nominal” value
and not used “Por” value.
*2) If the “Pw_nominal” value is indicated, use the “Pw_nominal” value
and not used “Ppw” value.
*3) Round off after the decimal point.
Table 3-5-1. Hi-MD3 adjustment parameter
ItemNo.
2264
2265
2266
2267
Display
20mA I **
140mAI **
170mAI **
500mAI **
Specification value Connected Resistor
20 mA ± 11 mA
22Ω (more than 0.1W)
140 mA ± 14 mA
10Ω (more than 1.0W)
170 mA ± 15 mA
10Ω (more than 1.0W)
500 mA ± 32 mA
2.2Ω (more than 1.5W)
Table 3-3-1. Ampere Specifications
18
MZ-RH10
Example of Calculation:
Item No.
0211
0212
0213
0214
0215
0216
Parameter
Decimal
50
30
147
40
38
116
Pr_nominal 2.48 mW
Kr
−0.3 %/°C
Pw_nominal 7.35 mW
Kw
−0.4 %/°C
Prmin
1.9 mW
Pwmin
5.8 mW
Result
Hexadecimal
32h
1Eh
93h
28h
26h
74h
3-5-3. Other setting
Procedure:
1. Enter the test mode (Display Check mode).
2. Press the [VOL+] key to enter the Manual mode.
3. Press the [VOL+] key once and press the > key five time to
select the item number 1113 and display as follows.
Display of the remote commander
113 SS**$$##
adjustment value (hexadecimal)
Procedure:
1. Enter the test mode (Display Check mode).
2. Press the [VOL+] key to enter the Manual mode.
3. Press the > key once, press the [VOL+] key once, and press
the > key once again to display as follows.
Display of the remote commander
210 DiscPr
4. Press the > key once to select the item number 0211.
5. Adjust with [VOL+]/[VOL--] keys so that the adjustment value
of LCD becomes calculated value.
6. Press the X key on the set or
– key on the remote
commander to write the adjusted value.
7. Press the > key to next item.
8. Repeat adjustment from step 4 until item number 0216.
3-5-2. Destination setting
Procedure:
1. Enter the test mode (Display Check mode).
2. Press the [VOL+] key to enter the Manual mode.
3. Press the > key five time to select the item number 0113
and display as follows.
Display of the remote commander
113 DistFL **
adjustment value (hexadecimal)
4. Adjust with [VOL+]/[VOL--] keys so that the adjustment value
of “**” on the LCD becomes “1A”.
5. Press the X key on the set or
– key on the remote
commander to write the adjusted value. ($$ blinks and disc
mark rotates on the LCD)
6. Adjust with [VOL+]/[VOL--] keys so that the adjustment value
of “$$”on the LCD becomes “20”.
7. Press the X key on the set or
– key on the remote
commander to write the adjusted value. (## blinks and disc
mark rotates on the LCD)
8. Adjust with [VOL+]/[VOL--] keys so that the adjustment value
of “##”on the LCD becomes “94”.
9. Press the X key on the set or
– key on the remote
commander to write the adjusted value.
10. Press the [VOL+] key once to change the adjustment value of
“**” on the LCD into “1B”.
11. Press the X key on the set or
– key on the remote
commander to write the adjusted value. ($$ blinks and disc
mark rotates on the LCD)
12. Adjust with [VOL+]/[VOL--] keys so that the adjustment value
of “$$”on the LCD becomes “F1”.
13. Press the X key on the set or
– key on the remote
commander to write the adjusted value. (## blinks and disc
mark rotates on the LCD)
14. Adjust with [VOL+]/[VOL--] keys so that the adjustment value
of “##”on the LCD becomes “1A”.
15. Press the X key on the set or
– key on the remote
commander to write the adjusted value.
16. Press the x key four times and back to the Display Check
mode.
4. Press the [VOL+]/[VOL--] key and set the according value to
each destination referring to the following table.
5. Press the X key on the set or
– key on the remote
commander to write the adjusted value.
6. Press the > key to select the item number 0114.
7. Repeat adjustment from step 3.
8. Press the x key four times and back to the Display Check
mode.
Destination
US and Canadian
AEP, UK and East European
E, Hong Kong, Korean, Australian
and Tourist
Setting value
Item No. 0113 Item No. 0114
20
80
A0
80
24
80
Table 3-5-2. Destination Setting
19
MZ-RH10
3-6. Servo Overall Adjustment
Note1: Be sure to adjustment so that the set is horizontal and the LCD is
upside. Unless performed in that state, it is not adjusted correctly.
Note2: If NG is displayed in the middle of this adjustments, perform “3-2.
Initialize The Adjustment Value” and “3-5. Setting The Adjustment
Values” again, then retry this adjustments from step 1.
Procedure:
1. Enter the test mode (Display Check mode).
2. Press the [VOL--] key to enter the Overall Adjustment mode.
3. Insert the CD adjustment disc (TDYS-1).
4. Put the main unit horizontal so that the LCD becomes upside,
and press the . key.
5. Wait until “CD OK” is displayed on the LCD.
6. Insert the MD1/HiMD1 hybrid adjustment disc
(MDW-74/GA2).
7. Put the main unit horizontal so that the LCD becomes upside,
and press the > key.
8. Wait until “MD1 OK” is displayed on the LCD.
9. Insert the Hi-MD3 adjustment disc (HMD1GSDJ).
10. Put the main unit horizontal so that the LCD becomes upside,
and press the [VOL+] key.
11. Wait until “HMD3OK” is displayed on the LCD.
12. Eject the disc and close the lid.
13. Put the main unit horizontal so that the LCD becomes upside,
and press the [VOL--] key.
14. Wait until “OfstOK” is displayed on the LCD.
15. Press the x key and back to the Display Check mode.
3-7. Resume Clear
Procedure:
1. Enter the test mode (Display Check mode).
2. Press the [VOL+] key to enter the Manual mode.
3. Press the [VOL+] key once, press the > key once, press the
[VOL--] key once, press the > key once, and press the [VOL+]
key twice, press the > key three times to select the item
number 1933.
4. Press the X key on the set or
– key on the remote
commander to resume clear.
5. Press the x key four times and back to the Display Check
mode.
3-8. Releasing The Test Mode
Note: When the power supply is switched on in the state where all
electrical adjustments have not finished, it is displayed on LCD as
“Error EE’’ and the usual operation can’t be performed. When a
power supply is accidentally turn off in the middle of electrical
adjustments, it is again set as test mode and electrical adjustments
is mode to complete.
20
MZ-RH10
SECTION 6
DIAGRAMS
6-1. BLOCK DIAGRAM – MD SERVO Section –
OVER WRITE HEAD DRIVE
IC601 (1/2)
HR601
OVER
WRITE
HEAD
M703
OVER WRITE
HEAD
UP/DOWN
RF AMP, FOCUS/TRACKING ERROR AMP
IC501
IY
IX
JX
JY
A
B
C
D
RF_IY
RF_IX
RF_JX
RF_JY
56
1
54
55
50
51
52
49
IY
82 OUTB
145 VIN
RFO 8
ABCD 40
C
D
ADFG 23
RF BUFFER
Q504
101
RFI
TO IC801 (2/3)
(AUDIO SECTION)
108 ABCD
FE 41
109 FE
TE 42
114 TE
SYSTEM CONTROLLER, DSP
IC801 (1/3)
153 ADFG
PD-NI 19
142 APCREF_DA
CLK 26
174 FS256_OUT
180 OFTRK
20 PD_BUF
18 PD_I
17 PDO_SOURCE
IIN
VC 38
123 VREF_MON
VREF09 9
PEAK 48
BOTM 47
110 VC
106 PEAK
107 BOTM
SBUS 33
SCK 32
SMON 21
OPTICAL
PICK-UP
BLOCK
(ABX-UJ)
251 SSB_DATA
252 SSB_CLK
113 SE
XRESET 35
209
210
254
272
S1
PLSE_XDC
CONT
PD_S0
PD_S1
LDPEN
XLSRCK
TRK+
TRK–
FCS+
FCS–
TRK+
TRK+
FOCUS/TRACKING
COIL DRIVE,
SPINDLE/SLED
MOTOR DRIVE
IC701
225 XRF_RST
S0
30 FO2
32 RO2
FI2 28
RI2 27
155 TFDR
154 TRDR
13 FO1
11 RO1
FI1 15
RI1 16
156 FFDR
157 FRDR
UI2 43
VI2 42
WI2 41
216
172
167
168
TRK–
TRK–
35
27
37
24
39
23
26
FCS+
FCS+
U
FCS–
FCS–
MDVCC
PVCC
VCC
M
245 175 182 158
OFTRK 45
F
84 OUTA
M702
(SLED)
W
V
MDVCC
REG2 B+
REG3 B+
UO2
CPUI2
VO2
CPVI2
WO2
CPWI2
COM2
PWM2 44
ZI2 22
8 UO1
UI1 56
VI1 1
WI1 2
18 CPUI1
6 VO1
19 CPVI1
MZ-RH10
21
21
CPWO1
SLD_MON
SRDR
SLDV
SLDW
159 SFDR
289 HI_Z_SLD
232
160
162
163
SPDL_MON
SPRD
SPDV
SPDW
161 SPFD
ZI1 21
290 HI_Z_SPDL
OE 48
238 XRST_MTR_DRV
52 53 54
CLV MON V
CLV MON U
SLD MON W
47 46 45
CLV MON W
• SIGNAL PATH
: PLAYBACK
: REC
CPVO2
CPUO2
V
CPWO2
W
SLD MON V
SLD MON U
M701
(SPINDLE)
PWM1 55
4 WO1
20 CPWI1
17 COM1
CPVO1
CPUO1
U
A
(Page 23)
EFM_CLK 63
LATCH 56
NPPO 43
IX
JX
JY
A
B
15 A_C
14 D_C
EFM 62
FS4
11
10
13
12
ADIP_IN 39
CLK
CLK 60
EFMO
7 VREF10
HB
HBB
HA
HAB
XCS_REC_DRV
CHOPPERCLK
VREF
77
69
78
70
OVER WRITE
HEAD DRIVE
Q601, 602
SLCU 169
SLCV 170
SLCW 171
SPCU 164
SPCV 165
SPCW 166
SLD MON U
SLD MON V
SLD MON W
CLV MON U
CLV MON V
CLV MON W
MZ-RH10
6-2. BLOCK DIAGRAM – AUDIO Section –
MUTEON
SWITCHING DRIVER,
HEADPHONE AMP
IC351
DCLSOUTL
(Page 23)
OUT2 14
8 IN2
151
DCLSOUTR
: PLAYBACK
OUT1 11
9 IN1
150
• SIGNAL PATH
J351
i
MUTING
Q351
FROM IC801 (1/3)
(MD SERVO SECTION)
J301
E
: OPTICAL IN
LINE IN
(OPT)
: LINE IN
6 MCK
4 VREF
FS512 312
D_VCONT_PWM 243
173 DIN
B+ SWITCH
Q301
VC01 B+
15 MICL
22 MICR
18 PREL PREOL 16
19 PRER PREOR 21
SDT0
MCLK
BCLK
LRCK
PDN
J302
VCO1
B+
MUTING
CONTROL
Q352
A/D CONVERTER, MIC AMP
IC301
28 LIN
1 RIN
MUTING
CONTROL
Q353
MUTING
Q151, 251
7
9
8
10
14
307
306
309
308
190
F351
RVDD
: USB input from PC
RVDD
DTCK
KEY_R
RGND
VG
B+
: USB output to PC
: MIC IN
XMUTE 212
ADDT
FS256
XBCK
LRCK
XPD_ADC
DTCK 313
RMC_KEY 131
RMC KEY
F
(Page 23)
CDTI 11
CCLK 12
CSN 13
189 XCS_ADC
3
2
DATA–
CN451 (1/2)
(USB)
1
REG1 B+
VBUS
VBUS
200 XOPT_CTL
G
(Page 23)
X801
48MHz
310
311
SYSTEM CONTROLLER, DSP
IC801 (2/3)
WK_DET
REC_KEY/DOWNLOAD
SI1
SO1
SCK1
XCS_LCD
SET_KEY_1
SET_KEY_2
JOG_A
JOG_B
PAUSE_KEY
XRST_LCD
HALF_LOCK_SW
OPEN_CLOSE_SW
PROTECT
UMD_PROTECT
XHOLD_SW
202
206
128
133
213 214 215 236
124 125 248 249 183
192
135
188
184
253
227
(Page 23)
EEPROM
IC891
SI0
SO0
SCK0
XCS_NV
XNV_WP_CTL
EL_VDD_CTL
XRST
EL_PWR_CTL
B
193 USB_WAKE
320
UOSCO
WAKE UP SWITCH
Q803
UOSCI
319
X802
22.5792MHz
2
5
6
1
3
195
196
197
239
208
SO
SI
SCK
XCS
XWP
SDO0
SCK0
185 OPT_DET
186 XJACK_DET
187 XMIC_DET
OSCO
+2.1V
REGULATOR
IC302
DATA+
UDP 314
UPUEN 318
UDM 315
3
OSCI
AVDD
MIC
(PLUG IN POWER)
SDO0, SCK0
H
(Page 23)
D
DDC3 B+
VB B+
RST
S892
HALF
LOCK
S893
OPEN/CLOSE
DETECT
S890
PROTECT
DETECT
S891
Hi-MD
PROTECT
DETECT
S895
HOLD
OFF
HOLD
XWK2
XWK4
XWK1
XWK1, XWK2,
XWK4
SWITCH
UNIT
SET_KEY_1
SET_KEY_2
JOG_A
JOG_B
PAUSE
RESET
SWITCH
Q471
SDI
SDO
SCK
CS
+2.4V
REGULATOR
IC471
REC
DDC3 B+
XWK
DC/DC
CONVERTER
IC491, Q491
OLED_VCC
B+ SWITCH
Q492, 493
OLED-LCD_VDD
DDC3_EL B+
(Page 23)
MZ-RH10
22
22
MZ-RH10
6-3. BLOCK DIAGRAM – POWER SUPPLY Section –
(Page 22) H
(Page 22) B
SDO0 SCK0
SDO0
SCK0
58 DATA
60 SCK
CLK
CLK 63
XWK1, XWK2,
XWK4
XRST
64
59
34
17
RESET SIGNAL
GENERATOR
IC903
VG
B+
VC
B+
OR GATE
IC605
+1.2V
REGULATOR
IC604
98 REG_OUT
REG5 B+
61 VIF
13 VC
14 VC
REC KEY
MUTEON
REGI1 55
REGI2 52
REGI3 48
SLEEP_IN
RVDD
VG
TSBV_IN
REG_IN
DVDD_IN
VSTB_IN
VREFIN
B+ SWITCH
RVDD
Q904, 905
12 VO1
10 VC1
24 VG
83
101
97
90
105
18
POWER CONTROL
IC601 (2/2)
106 VSTB_OUT
102 TSBV_OUT
REG5 VSTB B+
REG5 TSBV B+
RST_OUT
91 DVDD_OUT
REG4 B+
(Page 22)
F (Page 22)
E (Page 22)
POWER CONTROL
IC901
87 64 94 59 58
VOLTAGE
DETECT
IC606
VBUSSEL2
VOLTAGE
DETECT
IC607
D
XWK1
WAKE UP SWITCH
Q906
XWK1 5
VRMC 6
XWK3 3
SDO0
SCK0
XRST 136
DACVREFH 141
VCO2 VC01
B+
B+
XWK4
XWK2
XWK4 2
XWK2 4
MUTEON 45
B+ SWITCH
Q616, 617
RESET
SWITCH
Q618
VSTB
B+
DATA
SCK
XRST2_DET
SLEEP
XCS_PWR_IC
229 218 233
SLEEP
STRB
XRST2
XRST1
A (Page 21)
11
40
9
57
REG1 B+
REG2 B+
REG3 B+
VREC B+
VREC 112
VRECIN 80
VRECIN 81
B+ SWITCH
Q502, 503
MDVCC
VCO1
VCO2
VSTB
VREF
54 REGO1
51 REGO2
47 REGO3
DDC3 B+
LVB 7
VB 27
FCRAM_VDD
LG 25
B+ SWITCH
Q885, 886
REG5 B+
FFCLR
L1 13
L1 14
D885
D884
L2 37
L2 38
B+ SWITCH
Q901
DRAM_
HOLD_DET
+2.2V
REGULATOR
IC882
DC/DC
CONVERTER
IC881
VB B+
VOLTAGE
DETECT
Q884
DW_2T 43
DW_2B 44
DRAM_
VDD_CLR
REGULATOR
CONTROL
Q883
REGULATOR
CONTROL
Q881
D882
DRAM_ALONE
MDVCC_CTL 204
D883
67 RECP
+1.2V
REGULATOR
IC602
REG F B+
L1_1 7
L1_2 6
121
129
127
120
VB B+
VBUS B+
DC IN B+
RVDD
TH801
73 VG2
66 VG3
DDC3 B+
DDC3_EL B+
VBUS_DET 250
USBHOLD 316
SUSPEND 317
RST_CONT 132
21 V3O_1
22 V3O_2
28 V3FB
51 VBUS_DET
86 HOLD_OUT
99 SUS_IN
95 RST_IN
UP_1T
UP_1B
DW_1T
DW_1B
L5_1 45
L5_2 49
POWFB 46
J402
DC IN 3V
THP401
B+ SWITCH
Q611
–
B+ SWITCH
Q608
+
VB B+
SWITCHING
Q612
54
36
88
43
38
42
37
41
VBUS_VB_CTL
205
SYSTEM CONTROLLER
IC801 (3/3)
G (Page 22)
DC IN
DETECT
Q402
L3_1 24
L3_2 25
UP_3B 17
VBUS
VPDRV
PVBUS
VBUSSEL
CLP
CLM
POWP1
POWP2
VBUS
9
10
3
2
FFCLR
FCRAM_VDD
108 V33RO
VOLTAGE
LIMITER
Q451, 452
B+ SWITCH
Q603
PWR_WAKE
8
CHG_SW2
5
VI 6
IN1– 12
I_CTL1 20
CHARGE CONTROL
IC401
219 73 75 256 257 207
FFCLR
FCRAM_VDD0
FCRAM_VDD1
DRAM_HOLD_DET
DRAM_VDD_CLR
DRAM_ALONE
B+ SWITCH
Q801, 802
+2.5V
REGULATOR
IC804
VB_MON
VBUS_MON
HIDC_MON
TEMP_MON
B+ SWITCH
Q609
93 OSC_OUT
REG5 OSC B+
USB IF VDD
VRECO_1 5
VRECO_2 4
DRAM_HOLD_DET
DRAM_VDD_CLR
DRAM_ALONE
RECP 181
RECP_MON 231
DCIN_DET
CC_CTL/VI_CTL
CHG_PWM
CHGI_CTL2
CHGI_CTL3
CHG_MON
126
237
240
221
222
122
CHG_TYPE2 255
4
7
29
23
22
CHARGE ON/OFF
CONTROL
Q407
MZ-RH10
23
23
D443
D444
USB CHARGE
ON/OFF CONTROL
Q441, 442
CN451 (2/2)
(USB)
REGULATOR
Q401
D401
NICKEL METAL HYBRID
RECHARGEABLE
BATTERY
(NH-14WM)
1PC. 1.2V 1400mAh
DC IN DETECT
Q433
CHG_SW1 30
USB_CHARGE 234
BATT_MINUS_MON 130
GND_SW 246
XGUM_ON 198
D438
RF1 26
BAT+ 31
VO 32
VI_CTL
CHG_CTL
I_CTL2
I_CTL3
A/D
16 TYPE2
DC IN B+
S894
(BATTERY INSERT DETECT)
DRY BATTERY
SIZE "AA"
(IEC DESIGNATION R6)
1PC. 1.5V
(BATTERY CASE)
CHARGE
CONTROL
Q432
GROUND LINE
SWITCHING
Q403, 406
MZ-RH10
• Note For Printed Wiring Boards and Schematic Diagrams
Note on Printed Wiring Board:
• X : parts extracted from the component side.
• Y : parts extracted from the conductor side.
•
f : internal component.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
Caution:
Pattern face side:
(Conductor Side)
Parts face side:
(Component Side)
Parts on the pattern face side seen from
the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
* Replacement of IC401, IC501, IC601 and IC801 used in
this set requires a special tool.
• MAIN board is multi-layer printed board.
However, the patterns of intermediate-layer have not been included in this diagrams.
• Lead Layouts
surface
Lead layout of conventional IC
CSP (chip size package)
• Waveforms
Note on Schematic Diagram:
• All capacitors are in µF unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise
specified.
•
f : internal component.
• C : panel designation.
Note:
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part
number specified.
1
IC501 8 (RFO)
(MD play mode)
7
IC301 8 (BCLK)
2.2 Vp-p
1.0 Vp-p
Note:
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce por tant le numéro
spécifié.
354 ns
500 mV/DIV, 500 ns/DIV
2
• A : B+ Line.
• Power voltage is dc 1.5 V and fed with regulated dc power
supply from battery terminal.
• Voltages and waveforms are dc with respect to ground
under no-signal conditions.
no mark : PLAYBACK
∗
: Impossible to measure
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production tolerances.
• Circled numbers refer to waveforms.
• Signal path.
E : PLAYBACK
j : REC
J : OPTICAL IN
F : LINE IN
d : USB input from PC
G : USB output to PC
N : MIC IN
IC501 ra (FE)
(MD play mode)
1 V/DIV, 100 ns/DIV
8
Approx.
280 mVp-p
2.5 Vp-p
88 ns
100 mV/DIV, 500 ns/DIV
3
IC501 rs (TE)
(MD play mode)
200 mV/DIV, 500 ns/DIV
4
IC351 6 (MCK)
* Replacement of IC401, IC501, IC601 and IC801 used in
this set requires a special tool.
• The voltage and waveform of CSP (chip size package)
cannot be measured, because its lead layout is different
form that of conventional IC.
1.8 Vp-p
44.3 ns
1 V/DIV, 20 ns/DIV
5
IC491 5 (EXT)
(MD play mode)
3.2 Vp-p
5.6 µs
1 V/DIV, 2 µs/DIV
6
IC801 <czz (OSCO)
2.6 Vp-p
44.3 ns
1 V/DIV, 20 ns/DIV
MZ-RH10
24
24
1 V/DIV, 50 ns/DIV
9
Approx.
100 mVp-p
IC301 9 (MCLK)
IC301 q; (LRCK)
2,3 Vp-p
22.8 µs
1 V/DIV, 10 µs/DIV
MZ-RH10
6-4. SCHEMATIC DIAGRAM – MAIN Board (1/9) –
• See page 36 for IC Block Diagrams.
TRK-
TRK+
(1/9)
XRST_MTR_DRV
XRST_MTR_DRV
C714
0.1
SLD_CON_W
C716
0.1
SLD_CON_W
SLD_CON_V
SLD_CON_V
SLD_CON_U
SLD_CON_U
SLD_PWM
SLD_PWM
SLD_MON_U
SLD_MON_U
SLD_MON_V
SLD_MON_V
SLD_MON_W
SLD_MON_W
SLD_CON_W
SLD_CON_V
TF1
TF1
TR1
TR1
R707 2.2k
ZI2
R708 2.2k
ZI1
R709 2.2k
FR1
ZI2
ZI1
M702
SLD_PWM
SLEDV
FO2
VMF2
PGND2
RO2
VMR2
VMU2
VO2
UO2
WO2
VMVW2
VI2
WI2
UI2
PGNDUV2
V
SLD_CON_U
PGNDW2
W
R713 1k
CN701
10P
SLEDW
C703 0.047
C701 0.047
FF1
N
C702 0.047
U
CLV_CON_W
CLV_CON_W
TF1
CLV_CON_V
TR1
CLV_CON_U
FI2
CLV_CON_V
RI2
PWM2
CLV_CON_U
SLD_MON_U
CLV_PWM
SLEDU
COM2
CPUO2
CLV_PWM
SLD_MON_V
CLV_MON_U
SLEDN
CLV_MON_U
CLV_MON_V
HD_DRV-
CPWO2
OVER WRITE
C712
0.1
HD_DRV+
HEAD UP/DOWN
CLVV
(SPINDLE)
CLVU
N
CPWI2
IC701
SC901583EPR2
GND
CLV_MON_V
CLV_MON_W
SPINDLE/SLED MOTOR DRIVE
OE
C713
0.1
CPVI2
FOCUS/TRACKING COIL DRIVE,
XRST_MTR_DRV
CLVW
M701
Z12
VC
Z11
VG
CPWI1
CLV_MON_W
Z12
Z11
CLV_MON_W
CPWO1
CPVI1
CPVO1
CPUI1
CPUO1
COM1
PWM1
RI1
CLV_MON_V
C710 0.022
CLV_MON_U
F01
VMF1
FI1
PGND1
RO1
VMR1
VMU1
VO1
FF1
UO1
PGNDUV1
R710 10k
WI1
VI1
UI1
VMVW1
FR1
CLV_CON_U
WO1
CLV_PWM
PGNDW1
0.022
C709 0.01
C708
0.022
C707 0.01
C706
V
C705 0.01
CLVN
W
CPUI2
CPVO2
SLD_MON_W
M703
U
(Page 32)
FR1
FF1
(SLED)
R711 10k
A1
R712 10k
A2
A3
CLV_CON_V
A4
CLV_CON_W
(Page 26)
A5
C715
0.1
FCS+
B3
B2
B1
FCS-
C717
0.1
(Page 27)
MZ-RH10
25
25
MZ-RH10
• See page 36 for IC Block Diagrams.
6-5. SCHEMATIC DIAGRAM – MAIN Board (2/9) –
(2/9)
XCS_REC_DRV
C673
0.1
SUSPEND
SUSPEND
USB_HOLD
REG_DACVREFH
IC606
XC61CN1702NR
VBUS_DET
SCK0
4FS
EFM
SDO0
RECP
HAB
EFM_CLK
VOLTAGE DETECT
HBB
HA
REG_F
C669 1
HB
USB_HOLD
C668 1
RECP
RECP
EFM_CLK
EFM_CLK
EFM
C643
2.2
EFM
XCS_REC_DRV
XCS_REC_DRV
+1.2V REGULATOR
VBUS_DET
(Page 32)
VBUS_DET
VIN
VDD
VOUT
R663 220k
+1.2V REGULATOR
R662 470k
NC
IC604
R1180Q121C-TR-F
C625
0.1
VBUS_VB_CTL
C630
0.1
VOUT
GND VOUT
VSS
C636
0.1
IC602
R1160N121B-TR-F
VDD
C619 1
NC
GND
ECO
CE
R693
0
C621
10
6.3V
C601
1
R659
100k
RST_CONT
R628
22
RST_CONT
SDO0
SDO0
-1
-2
R6694
10
R6695
0
Q617
RT3WLMM-TP-1F
R660
470k
Q616,617
R678
0
R661
470k
SCK0
R618
100k
SCK0
4FS
4FS
-1
Q608
XP4314-TX
R608 1
-2
SLEEP
SLEEP
RMC_DTCK
B+ SWITCH
B+ SWITCH
RMC_DTCK
R619 100k
XRST
XRST
A1
3.3V
3.3V
A2
REG5_VSTB
REG5_VSTB
USB_HOLD
DC IN
REG5_REG
REG5_REG
SCK
CLK
VIF
DATA
EFM
PGND4
EFM_CLK
VG3
GND
RECP
CH
HBB
HAB
GND
CL
VG2
VCP
PGND4
HB
HA
PGND2
VRECIN
RST_OUT
VBUSSEL2
Q616
RTL035N03
HOLD_OUT
VRECIN
VG
NC_AI2
D614
MA2SD32008S0
OUTB
DETECT
OUTA
S
REG5_OSC
REG4_DVDD
R646
47k
LATCH
REG4_DVDD
REG_F
REG_F
XWKO
REG_DACVREFH
REG_DACVREFH
VBUS
C612 22 6.3V
C602
0.1
CRST
R681
1M
V33UO
DVDD_IN
C613
R686
0
WAKEC
PVBUS
REG4_DVDD
DVDD_OUT
S
C644
4700p
VBUSREF
0.1
DDC3
VB
Q611
RTL035N03
VBUS_DET
22 6.3V
C604
(Page 31)
REG5_OSC
NC_M12
DDC3_EL
B+ SWITCH
L5_2
HOLDC
REG5_OSC
OR GATE
OSC_OUT
PGND5
SLEEP_IN
PGND5
RST_IN
POWFB
RST_CONT
R679
220
XRST
C614 22 6.3V
VCC
R654 1M
PGND2
L5_1
REG_IN
REG_OUT
R647
1M
C677
0.1
(Page 25)
VSS
SUSPEND
C675 0.01
C671
0.1
R653
22k
D601
C607 1 MA2SD32008S0
SUS_IN
OVER WRITE HEAD DRIVE,POWER CONTROL
PGND2
IC601
SC901585VAR2
POWP2
∗
INP3
TSBV_IN
CLM
CSP(Chip Size Package)
C616 22 10V
VIN
R649
1
C658
47
6.3V
CLP
PGND1
POWP1
VSTB_IN
VPDRV
VSTB_OUT
C672
4.7
RF2
C609 1
DETECT
R683
1M
R682
1M
BATSEL
DTC2
V33RO
INM2
RF1
INM3
DW_3B
DW_3T
L3_2
L3_1
33USEL
V30_2
V30_1
PGND3
PGND3
VREFIN
UP_3B
PGND1
PGND3
VC
VC
PGND1
GND
UP_1B
UP_1T
INP1
VRECO_1
L1_1
L1_2
VRECO_2
NC_A1
DW_1T
VREC
DW_1B
DTC1
Q618
RT3WLMM-TP-1F
C641
0.01
R616
1k
C642
0.047
R617
1k
L608
4.7µH
DTC3
INM1
R605 C620
1k 0.047
-2
C611 0.01
R684
10k
C666 4.7
R675
2.2M
3.3V
-1
R651
1
D613 MA2SD32008S0
REG5_VSTB
VOLTAGE
R648
1
INP2
V33R
VOUT
R685
10k
D604
MA22D2800LS0
VBUSSEL
TSBV_OUT
NC
L607
47µH
PGND5
REG5_REG
GND
IC607
XC61CN0902NR
C662
10
6.3V
R645 470k
SLEEP
IC605
TC7S32LFU(TE85R)
R664
2.2
RF3
R629
2.2M
NC_M1
V3FB
RESET
SWITCH
A3
R612 2.2M
A4
R687 0
HB
Q601,602
C6679
47p
OVER WRITE
R6621
2.2
HEAD DRIVE
C638
0.01
HBB
HA
HAB
C645
0.01
L605 22µH
R689
0
C623
220p
R6623
CL604
2.2
L603
10µH
R625 470k
C648 0.047
D602
MA2Z748001S0
S
-2
S
D608
BAT54XV2T1
C646
0.047
L601 10µH
C622
47
6.3V
C627
47
6.3V
C628
1
C633
0.01
Q612
RTR025N03
C635
47
6.3V
C634
1
S
CL658
C637
10
6.3V
C653
10
6.3V
SWITCHING
-1
R6620
2.2
D605
BAT54XV2T1
R624 470k
A5
Q602
MCH6617-TL-E
D607
MA22D1700LS0
W602
OVER WRITE
B+ SWITCH
HEAD
D6615
MA22D1700LS0
-2
-1
R6622
2.2
Q601
CPH5614-TL-E
S
C6676
1000p
L606
10µH
Q603
NTHD4508NTIG
C6674
33p
100V
C6649
0.1
C650
10
6.3V
D6616 MA22D1700LS0
D606
MA22D1700LS0
W601
HR601
Q609
NTHD4508NTIG
B+ SWITCH
S
S
S
S
C6680
1000p
R690
0
C1
D1
C2
R691
0
D2
C652
10
6.3V
(Page 28)
(Page 27)
F1
REG5_VSTB
F2
26
26
E13
E11
E10
E9
E7
(Page 29)
MZ-RH10
E8
E6
E5
E4
E3
E2
E1
(Page 30)
MZ-RH10
6-6. SCHEMATIC DIAGRAM – MAIN Board (3/9) –
• See page 24 for Waveforms.
• See page 36 for IC Block Diagrams.
B3
B1
B2
(Page 25)
(3/9)
C528 0.1
C553
4.7
6.3V
C554
0.1
C2
(Page 26)
SSB_CLK
SSB_DATA
C530
1
XRST_RF
VREF
TE
FE
C524
0.01
ABCD
R526 0
R525 0
C1
C523
0.1
R505
10
L503
10µH
S0
C519
0.1
S0
S1
S1
XLDON
C536
0.022
XLDON
PLSE_XDC
PLSE_XDC
PEAK
PEAK
BOTM
BOTM
OFTRK
C537 1
C539 1
CP
DVCC
SCK
CPOUT
SBUS
VGIN
DGND
XRESET
VC
CIG
ABCD
NPPO
ADIP_IN
FE
TE
OFTRK
TE
TE
FE
FE
ABCD
CN
ABCD
VREF
AVCC2
CPGND
VREF
OFTRK
C513
0.01
OFTRK
CLK
TON_C
XRST_RF
SSB_DATA
C547 0.047
SSB_CLK
SSB_DATA
CDN
BOTM
PEAK
FCS-
FOCUS/TRACKING ERROR AMP
A
IC501
SN761059AZQLR
FCS+
B
FCS+
VPP_LPF
SMON
VC
APCREF_DA
JX
RFI
MDVCC_CTL
C538
4700p
MDVCC_CTL
AMICE_FS256
PDO_SOURCE
AMICE_FS256
VIN
XLDON
JY
VIN
A_C
REG03
D_C
RF_JX
RF_IY
RF_JY
RF_IX
VREF09
C573
220p
EQ
IX
C570
4.7
6.3V
PS
PVCC
VREF10
CL518
AGND
IY
PLSE_XDC
RFO
PDO_SINK
PLSE_XDC
OFC_C2
CONT
IIN
RFI
PD_NI
PD_I
OFC_C1
FB5501
0
APCREF_DA
VC
C552 0.01
AVCC
L1
APCREF_DA
PD_BUF
CSP(Chip Size Package)
C
S_MON
S_MON
∗
TRKTRK-
ADIP
S_MON
C550 0.047
D
FCS-
ADIP
ADFG
RF AMP,
TRK+
(Page 32)
SSB_CLK
ADIP
PEAK
TRK+
L2
C545 0.1
CCSL2
BOTM
CN501
26P
XRST_RF
AMICE_FS256
LDK
CL515
MDVCC
GND
F
C521 10p
CL511
VCC
S1
S1
C522 10p
L507
VREF
C525
4700p
C531
0.01
C533
0.01
JY
JX
IY
C517 0.1
0.1
C
0.1
B
C516
C511 0.1
A
C515
IX
VC
D
S0
S0
R501
2.2k
R502
1k
L502
10µH
C527
0.1
C518
4.7
6.3V
C529
0.1
C557
0.1
C520
0.1
C556
4.7
6.3V
L504
10µH
MDVCC_CTL
FB5503
0
L505
10µH
Q502
2SA2018TL
R514
47k
R517
10k
L506
10µH
C559
4700p
R524
220
Q502,503
B+ SWITCH
R513
10k
R515
10k
Q504
2SC4627J-C
(TX).SO
C555
4700p
R520
470
RFI
RF BUFFER
C558
1000p
VIN
Q503
2SC5383-TP-1F
R516
47k
C560
0.1
C564
4.7
6.3V
R518
47k
R519
1k
C565
0.1
C526
100p
C566
0.1
C567
4.7
6.3V
I1
I2
(Page 29)
MZ-RH10
27
27
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque 0 sont
critiques pour la sécurité. Ne les remplacer que
par une pièce portant le numéro spécifié.
MZ-RH10
• See page 36 for IC Block Diagrams.
6-7. SCHEMATIC DIAGRAM – MAIN Board (4/9) –
(4/9)
UDP
UDP
UDM
UDM
UDP
UDM
(Page 32)
D1
D2
Q451
RTQ035P02TR
(Page 26)
S
GND_SW
C453
0.047
VBUS_MON
BATT_MINUS_MON
BATT_MINUS_MON
Q451,452
CHG_TYPE2
SIZE"AA"
W402
1PC. 1.5V
R463
220
R467
10k
(IEC DESIGNATION R6)
-2
R464
100k
-1
Q452
RT3WLMM-TP-1F
CHG_TYPE2
CHG_I_CTL3
CHG_MON
DRY BATTERY
CHG_I_CTL3
CHG_I_CTL2
VOLTAGE LIMITER
W401
BATT_MINUS_MON
(BATTERY CASE)
CHG_I_CTL3
CHG_I_CTL2
CHG_I_CTL2
CHG_MON
Q407
RT1N144U-TP-1
CHG_MON
CHG_U
CHG_U
CHARGE
CHG_TYPE2
CHG_PWM
ON/OFF
CHG_PWM
(Page 32)
HIDC_MON
CONTROL
HIDC_MON
STAND_DET
STAND_DET
NI_VI_CTL
NI_VI_CTL
C4438
1000p
W403
C452
0.1
R462
220k
R466
2.2M
D458
MA8056-L-TX
NICKEL METAL HYDRIDE
RECHARGEABLE BATTERY
C4455
1000p
DATA+
CL460
(GND)
D4456
C4466 1000p
C4463
100p
C403
220
5V
I_SEL
AD_SEL
PGND
I_CTL1
TYPE1
BAT+
CHG_CTL
VI
VI_CTL
PWT
∗
VG
VI2
IC401
MM1690NCBE
CHG_SW2
WDT
V0
C415
0.1
LED_CTL
R442
100k
PWR_WAKE
Q441
XP4314-TX
CSP
(Chip Size Package)
FB4452
C4456 1000p
C4467 1000p
C4458 1000p
C4459 1000p
A/D
CHG_SW1
Q432
TPC8501
CHARGE
CONTROL
Q403,406
C402
220
5V
IN1CHARGE CONTROL
SWITCHING
SW_B
A7CAL_SW
I_CTL2
R423 220k
R455
1M
R4460
0
I_CTL3
AMP_SEL
GROUND LINE
SW_A
IAMP_CTL
D443 MA2SD3100LS0
DATA-
R401
0
D4441
UDZSTE-176.8B
D457
MA22D2800SL0
VBUS
CFB
IAMP_CAL
S
FB4451
R436
220k
TYPE2
RF1
R424 470k
CL453
GND
Q403
RTL035N03
C4465
1000p
LF4451
IO
BATD440 MA22D2800SL0
CN451
7P
(USB)
D4435
UDZSTE-176.8B
C4227 220p
C4425 1000p
D4442
C4428 1000p
D4443 EDZTE616.8B
C4429 1000p
RS
W404
GND
C424
100
6.3V
C4462
100p
NH-14WM
1PC. 1.2V 1400mAh
R432
1
R456
470k
R422
1M
R421
100k
R433
0.47
-1
R438
100k
-2
CHG_U
-2
Q441,442
USB CHARGE
-1
ON/OFF CONTROL
R425
2.2k
CHG_PWM
NI_VI_CTL
Q406
RT3WLMM-TP-1F
Q433
2SC5383-TP-1F
R441
0
R426 0
G4
DC IN
G1
DETECT
R437
220k
G2
G3
(Page 29)
HIDC_MON
R415
4.7k
R420
4.7k
C417
C420
0.1
REGULATOR
CL433
(GND)
C426
22
16V
C406
0.1
R434 1M
THP401
R414
10k
R419
10k
C421 0.1
R413
100k
C419
0.1
C412 0.1
DC IN 3V
Q401
TPC8601
C411 22 16V
C4418
1000p
C408 0.1
LF401
S
J402
D401
NSR0320MW2T1G
C409 0.01
R418
100k
C407 0.1
DC IN DETECT
D444 MA2SD3100LS0
G5
D438
MA22D2800LS0
Q402
RTL035N03
Q442
RTL035N03
M1
M3
M2
S
(Page 33)
R443
100k
0.1
H1
D4436
EDZTE616.8B
C4416
1000p
C4464
0.1
R417
1M
STAND_DET
(Page 30)
D450 NSR0320MW2T1G
MZ-RH10
28
28
MZ-RH10
• See page 36 for IC Block Diagrams.
6-8. SCHEMATIC DIAGRAM – MAIN Board (5/9) –
E13
E11
E9
E10
E8
E6
E7
E4
E5
E3
E1
E2
(Page 26)
(5/9)
I1
I2
J1
(Page 27)
J2
C922
100
6.3V
C958
1
WK_DET
HALF_LOCK
REC_KEY
XRST2
C915
10
6.3V
C9001
0.01
RMC_KEY
J4
L903
10µH
C923
47
6.3V
R968
470k
R969
2.2k
VSS
R922 100k
R920 470k
-1
-2
Q906
RT3WLMM-TP-1F
R967 470k
NC
D904
HRC0201ATRF-E
R917 220k
L906
4.7µH
R918 470k
R914 10k
RESET SIGNAL GENERATOR
IC903
XC61CC1702NR
C954 1000p
D906
NSR0320MW2T1G
WAKE UP
SWITCH
VIN
R966 47k
VOUT
C961
0.1
R908
22k
R910
22k
R912
220k
C902
R924
470k
0.1
R906
47k
XWK4
XWK3
XWK2
XWK1
LVB
VRMC
HVB
VC1
VSTB
VCO1
L1
VO1
L1
FFCLR
R903
1M
C909
22
16V
PGND1
0.1
PGND1
C903 0.01
C901
XRST1
SLEEP
4FS
CRST1
CLK
SEQSEL
XRST1ADJ
C931 2.2
DTC1
WDT
RF1
SCK
SCK0
C918
0.047
C906
1
XCS_PWR_IC
INM1
STRB
C1L
DATA
VG
VREF
SDO0
L901
100µH
(Page 30)
C932 0.01
POWER CONTROL
IC901
SC901584EPR2
PGND3
REGI1
C933
2.2
R933
220k
REGI3
R927
1k
R930
47k
C935 2.2
C936 2.2
C945
2200p
R935 100k
R936 47k
R961
4.7
C937 2.2
C946
4700p
R937 22k
R938 47k
J6
R977
100k
(Page 28)
R960
0
C948
22
6.3V
R976 47k
D905
HRC0201ATRF-E
R926
100k
L904
10µH
R934
22k
C940
22
6.3V
C908
0.01
L907
47µH
C939
22
6.3V
R925
47k
REGC2
REGO3
REGC3
MUTEON
DW_2B
DW_2T
R907
10k
VC2
DTC2
R904
1M
VCIN
REG2G
VCO2
RF2
C919
0.022
VO2
REGO2
L2
REGI2
INM2
L2
VGSEL1
G1
PGND2
G4
PGND2
REGC1
XRST2
REGO1
VGSEL2
CL935
CRST2
VB
C959
0.1
R962
0
GND
R929 100k
LG
J3
Q901
US6K1TR
B+ SWITCH
J7
G2
-1
C920
0.1
C924
47
6.3V
S
-2
J8
C916
10
6.3V
S
J5
G3
L2
L1
G5
(Page 33)
MZ-RH10
29
29
MZ-RH10
• See page 24 for Waveforms. • See page 36 for IC Block Diagrams.
6-9. SCHEMATIC DIAGRAM – MAIN Board (6/9) –
F1
F2
(Page 26)
(6/9)
H1
(Page 28)
J1
J2
J4
D_VCONT_PWM
D_VCONT_PWM
R361
22
DCLSOUTR
DCLSOUTR
DCLSOUTL
DCLSOUTL
FS512
FS512
Q904
RTL035N03
XMUTE
(Page 32)
XMUTE
S
R923
2.2M
Q904,905
B+ SWITCH
TEMP_THP
XMUTE
WK_DET
R939
100k
WK_DET
REC_KEY
REC_KEY
Q352
RT1P441U-TP-1
RMC_KEY
-2
RMC_KEY
MUTING
HALF_LOCK
-1
CONTROL
HALF_LOCK
XRST2
SWITCHING DRIVER,
XRST2
Q905
XP4314-TX
HEADPHONE AMP
C3372
1000p
XCS_PWR_IC
C9957
220p
XCS_PWR_IC
S_GND
(Page 31)
C3374 1000p
GND
IC351
NJU8716AV(TE2)
VREG0
C370
1
CFB
R357
47k
Q353
RT2C00M
VREG
MUTING
VDD02
CONTROL
D_VCONT_PWM
VG
R353 22k
-1
VSS0
VREF
(Page 29)
-2
VSS0
FS512
F351
0.25A
125V
VSS
R354 0
D3352
DF8A6.8FK(TE85R)
OUT2
OUT1
MCK
VDD01
VDD
DCLSOUTL
IN1
C361 22 6.3V
C364 0.1
R355
1M
R366
0
DCLSOUTR
J351
R362
470k
IN2
R365
0
C351
0.1
C371
0.1
R364
0
RMC_DTCK
FB3355
RVDD
DTCK
RMC_KEY
FB3353
FB3357
KEY_R
RGND
FB3351
FB1151
FB2251
R359
470k
J3
R360
100k
R358
0
CL362
L152
47µH
J8
Q351
NTHD4508NT1G
C154
220
2.5V
R255
10
R256
47
R156
47
R251
4.7k
R151
4.7k
R155
10
MUTING
S
J7
R356
2.2k
-1
S
C254
220
2.5V
C362 10 6.3V
-2
R351
1M
Q151
2SK354700LS0
MUTING
C155 0.22
C153 0.1
C255 0.22
Q151,251
C253 0.1
1
C367
C360 0.1
1
C365
C381 0.1
100 6.3V
100 6.3V
C356
C354 1
C355
L252
47µH
Q251
2SK354700LS0
C352
0.1
J5
R352
47k
J6
MZ-RH10
30
30
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque 0 sont
critiques pour la sécurité. Ne les remplacer que
par une pièce portant le numéro spécifié.
MZ-RH10
R492 470k
REG5_VSTB
(7/9)
R472
47
C492 10p
• See page 24 for Waveforms. • See page 36 for IC Block Diagrams.
REG5_REG
6-10. SCHEMATIC DIAGRAM – MAIN Board (7/9) –
D491
HRC0201ATRF-E
L491
22µH
DC/DC CONVERTER
IC491
XC9103D092MR
R478
4.7k
R497
100k
Q493
XP4314-TX
EXT
R495 100k
CN471
18P
K1
B+ SWITCH
FB
R493
22k
20V
C491 2.2
R477
4.7k
R494 22k
R476
4.7k
Q492,493
Q492
RTL035N03
S
-1
-2
VDD
S
Q491
RTR025N03
R499
220k
K2
DC/DC
CE
CONVERTER
C493
1
K3
EL_PWR_CTL
GND
R482
100k
K4
R496
1M
K5
VC01
JOG_B
JOG_B
K6
JOG_A
EL_VDD_CTL
JOG_A
SET_KEY_2
R486
0
SET_KEY_2
SET_KEY_1
SET_KEY_1
REC_KEY
REC
R490 100
SDO1
SDO(OLED-LCD_SI)
D471 MA2Z748001S0
R489 100
SDI1
R491 100
SCK1
SDI(OLED-LCD_SO)
SCK
SWITCH UNIT
+2.4V REGULATOR
XCS_LCD
CS
IC471
XC6219B242MR
LCD_RST
RST
WK_DET
R488
220k
NC
XWK
CE
PAUSE
VSS
PAUSE
VOUT
DGND
VIN
C481
1
OLED_VCC
R473
0
OLED_VCC
C4485
0.1
SGND
R481 0
C480
1
OLED_LCD_VDD
XRST2
XRST2
WK_DET
R484
220k
WK_DET
REC_KEY
REC_KEY
-1
-2
RMC_KEY
RMC_KEY
Q471
RT2C00M
HALF_LOCK
HALF_LOCK
RESET
XCS_PWR_IC
XCS_PWR_IC
(Page 30)
SWITCH
R480
100k
C8858
1000p
S_GND
C479
0.1
GND
TEMP_TMP
C892
0.1
TEMP_THP
REG5_REG
PROTECT
SL891
R894
100k
S890
(PROTECT DETECT)
UMD_PROTECT
IC891
AK6512CM-E2
S891
XCS
VCC
SO
(Hi-MD PROTECT DETECT)
R895
100k
R899 0
XHOLD
SL892
HALF_LOCK
XWP
SCK
GND
SI
S892
R897
0
RST_CONT
RST_CONT
S893
(HALF LOCK)
(OPEN/CLOSE DETECT)
OPEN_CLOSE_SW
SDO0
SDO0
SL894
SCK0
SCK0
EEPROM
3.3V
3.3V
REG5_VSTB
REG5_VSTB
REG5_REG
REG5_REG
(Page 26)
R8891
1k
XHOLD_SW
SCK0
XRST
XRST
SDI0
RMC_DTCK
XCS_NV
RMC_DTCK
SDO0
SLEEP
SLEEP
XNV_WP_CTL
4FS
4FS
REG5_OSC
REG5_OSC
REG4_DVDD
REG4_DVDD
REG_F
REG_F
REG_DACVREFM
REG_DACVREFM
VB
DDC3
DDC3_EL
MZ-RH10
31
31
R8892
1k
XGUM_ON
S895
S894
(BATTERY INSERT DETECT)
C8893
1000p
HOLD
OFF
HOLD
(Page 32)
MZ-RH10
• See page 24 for Waveforms. • See page 41 for IC Pin Function Description.
6-11. SCHEMATIC DIAGRAM – MAIN Board (8/9) –
(8/9)
K1
K2
K3
K4
OPEN_CLOSE_SW
ADDT
FS256
LRCK
XBCK
D_VCONT_PWM
XRST
CLV_PWM
CLV_CON_V
CLV_CON_W
CLV_MON_U
SLD_CON_V
CLV_MON_V
CLV_MON_W
SLD_MON_U
SLD_MON_V
SLD_CON_W
DIN1
SLD_CON_U
SLD_MON_W
EFM_CLK
AMICE_FS256
EFM
OFTRK
PAUSE
OPT_DET
PROTECT
XJACK_DET
XCS_ADC
XMIC_DET
XPD_ADC
SDI0
LCD_RST
SCK0
SDO0
R878 47
XGUN_ON
XOPT_CTL
MDVCC_CTL
EL_PWR_CTL
EL_VDD_CTL
R834
470k
LRCK
VBUS_VB_CTL
S1
S0
XNV_WP_CTL
SDI1
XMUTE
SCK1
SDO1
SLEEP
SLD_CON_U
SL801
CHG_I_CTL2
CHG_I_CTL3
XRST_RF
XHOLD_SW
RECP
XRST2
CLV_CON_U
XCS_LCD
R843
2.2k
ADDT
FS256
Q803
2SC5383-TP-1F
R842
47k
WAKE UP
SWITCH
R858
10
R879
47
0
XOPT_CTL
XOPT_CTL
R827
100
R8813
0
FB8803
DIN1
R880
47
DRAM_ALONE
DIN1
FFCLR
XJACK_DET
C847
0.1
XCS_PWR_IC
OPT_DET
XJACK_DET
RMC_DTCK
SCK0
OPT_DET
R868
0
CHG_U
SCK0
XCS_NV
SDO0
NI_VI_CTL
CHG_PWM
GND
XRST_MTR_DRV
K6
SDO0
(Page 33)
WK_DET
K5
(Page 31)
R877
1M
C861
0.1
VDR8801
VBUS_DET
VBUS_VB_CTL
VBUS_DET
CHG_IAMP_CAL
SSB_DATA
SSB_DATA
CHG_PWM
CHG_PWM
NC
SSB_CLK
CHG_MON
SSB_CLK
CHG_MON
XCS_LCD
JOG_B
VBUS_DET
VBUS_VB_CTL
CC_CTL/VI_CTL
JOG_B
VBUS_DET
XRST_MTR_DRV
JOG_A
XCS_NV
JOG_A
XCS_REC_DRV
XCS_REC_DRV
(Page
26)
CHG_PWM
CS_RTC
SPCV
SPCU
SPDW
SLDV
SPCW
SLCU
SLCV
SLDW
SLCW
DIN
SRDR
FS256_OUT
CHOPPERCLK
MNT2
MNT1
MNT0
MNT3
OFTRK
RECP
EFMO
PAUSE_KEY
OPT_DET
PROTECT
XMIC_DET
XJACK_DET
NC
XCS_ADC
XPD_ADC
XRST_LCD
A7CAL_SW
USB_WAKE
SI0
SO0
SCK0
XGUM_ON
NC
BEEP
XOPT_CTL
4FS
FR1
FF1
FFDR
TF1
TFDR
TR1
TRDR
SPRD
ADIP
ADFG
SFDR
RTCK
DCLSOUTL
DCLSOUTL
DCLSOUTR
DCLSOUTR
VREFR
D_VCONT_PWM
UMD_PROTECT
GND_SW
AOUTR
UMD_PROTECT
GND_SW
SLD_PWM
FRDR
SPFD
GND_SW
CLV_CON_U
FS4
SPDV
GND_SW
CHG_TYPE2
EFM
OPEN_CLOSE_SW
EFM_CLK
EFM
EL_PWR_CTL
MDVCC_CTL
RECP
EFM_CLK
REC_LED/ACCESS_LED
VBUS_VB_CTL
EL_VDD_CTL
PD_S1
PD_S0
D_ENREG
SI1
XMUTE
SO1
SCK1
SLD_MON
AOUT_SEL
NC
SLEEP
FFCLR
NC
CHGI_CTL2
XTEST
XRF_RST
VREC_SEL
XHOLD_SW
DRAM_ALONE
XCS_REG_DRV
XNV_WP_CTL
RECP
CHGI_CTL3
USB_HOLD
XRST2_DET
USB_HOLD
T_MARK_SW
C813
0.047
CHGI_SEL
SUSPEND
SUSPEND
RECP_MON
R836
47k
XMIC_DET
SPDL_MON
AC_CHARGE
R957
220k
R835
220k
XMIC_DET
XCS_PWR_IC
XCS_ADC
XPD_ADC
XPD_ADC
USB_CHARGE
XBCK
XCS_ADC
CHG_OPR_LED
PLSE_XDC
VBUS_MON
AOUTL
LDPEN
VBUS_MON
XCS_REC_DRV
VREFL
CHG_TYPE2
BATT_MINUS_MON
BATT_MINUS_MON
DRAM_HOLD_DET
VIN
CHG_I_CTL2
VIN
DRAM_HOLD_DET
DRAM_VDD_CLR
CHG_I_CTL2
CHG_I_CTL3
AD3EXTC
DRAM_VDD_CLR
CHG_I_CTL3
ADC3VREFH
AD2ENDF
HIDC_MON
HIDC_MON
(Page
28)
APCREF_DA
CHG_TYPE2
TEST
STAND_DET
SRAM_MODE
APCREF_DA
REG_DACVREFM
CHG_TYPE2
STAND_DET
R823
10k
NI_VI_CTL
NI_VI_CTL
DACVREFH
PLL3EXTCO
HSALF
MON0
PLL3EXTCI
MON1
PLL2EXTCO
MON2
PLL2EXTCI
MON3
XRST
MON4
HALF_LOCK_SW
C814
0.1
XRST_MTR_DRV
XRST_MTR_DRV
SLD_CON_W
R810
0
SLD_CON_W
SLD_CON_V
C817
0.1
C843
0.1
C810
0.1
C830
1000p
C812
1
REG5_VSTB
D803 MA2SD32008S0
SLD_CON_V
XRST
SLD_CON_U
HALF_LOCK
SLD_CON_U
SLD_PWM
SLD_PWM
SL802
SLD_MON_U
MON5
RADIO_ON
MON6
REC_KEY/DOWNLOAD
MON7
RST_CONT
MON8
RMC_KEY
MON9
BATT_MINUS_MON
REC_KEY
SLD_MON_U
SLD_MON_V
RST_CONT
SLD_MON_V
SLD_MON_W
RMC_KEY
SLD_MON_W
TF1
XLDON
TR1
R860 10k
R861
10
TF1
BATT_MINUS_MON
VBUS_MON
TR1
VBUS_MON
XLSRCK
ZI2
WK_DET
ZI2
TAT
WK_DET
TAN
HIDC_MON
HIDC_MON
ZI1
ZI1
FR1
STAND_DET
FR1
(Page 25)
DCIN_DET
NAR
FF1
SET_KEY_2
FF1
IDO
SET_KEY_2
SAK
SET_KEY_1
LRCKI
VREF_MON
XBCKI
CHG_MON
CLV_CON_W
SET_KEY_1
CLV_CON_W
CLV_CON_V
VREF
CLV_CON_V
CHG_MON
CLV_CON_U
CLV_CON_U
C827 0.1
CLV_PWM
CLV_PWM
R837 2.2k
VB_MON
DATAI
SYSTEM CONTROLLER,DSP
CLV_MON_U
CLV_MON_U
SI3
TEMP_THP
SO3
R898
100k
C803 0.01
ADC1EXTC
∗
CLV_MON_W
CLV_MON_W
SCK3
C828
1000p
APC
CSP(Chip Size Package)
SI4
R854
47k
TEMP_MON
IC801
CXD2681-225GG
CLV_MON_V
CLV_MON_V
R857
470k
DCHG
SO4
ADRT
SCK4
AUX1
TH801
C888
0.01
S0
TE
S0
NC
TE
NC
SE
S1
S_MON
S1
XLDON
ZI2
PLSE_XDC
ZI1
XLDON
ADRB
HI_Z_SLD
PLSE_XDC
HI_Z_SPDL
ADIO
SET_CODE0
VC
SET_CODE1
FE
R820
220
PEAK
PEAK
BOTM
OFTRK
VC
FE
R829
0
BOTM
ABCD
OFTRK
SET_CODE2
ABCD
SET_CODE3
BOTM
D_EN1
PEAK
D_EN2
CLTV
BOTM
TE
TE
PEAK
FE
FE
ABCD
ABCD
VREF
DADT
FILI
PWM_L1
PCO
PWM_L2
RFI
R818
2.2k
SSB_DATA
(Page 27)
C808
1
R819
1k
R815
220k
SSB_CLK
SSB_CLK
R822
1M
FILO
D_ENVG
XRST_RF
XRST_RF
SSB_DATA
R821 2.2M
C809
0.1
R817 1k
VREF
RFI
C805 0.47
ADIP
ADIP
ASYI
I2C_1
C804 0.01
S_MON
S_MON
ASYO
I2C_2
REG5_REG
APCREF_DA
R813 0
APCREF_DA
JTAG0
EBIFVSS7
JTAG1
EBIFVDD7
CLKIN2
EBIFVSS6
FS256
EBIFVDD6
ADDT
EBIFVSS5
R811 R812
10k 100k
C857
22p
R814 0
VC
VC
RFI
RFI
FB8810
FS256
LRCK
0
VIN
FB802
0
6p
EBIFVDD0
OSCI
R808 2.2k
REG5_OSC
FVSS0
EBIFVSS1
EBIFVSS0
+2.5V REGULATOR
IC804
PST3325UL
FVDD0
FCRAMVSS1
FCRAMVDD1
FCRAMVSS0
DRAMVSS2
DRAMVSS0
DRAMVSS1
DRAMVDD4
DRAMVDD2
DRAMVDD3
DRAMVDD1
DRAMVDD0
IFVSS_2
IFVSS_1
IFVDD_4
IFVDD_3
IFVDD_2
IFVDD_1
VSS_2
VSS_1
VSS_0
USBIFVDD
MSJTAGVDD
MAIFVDD
TSMVDD
USBOSCVDD
OSCVDD
DAVSS
DVDD25LPF
DAVDD
AVSS6
AVDD6
AVSS5
AVDD5
AVSS4C
AVDD4C
AVSS4B
AVDD4B
AVSS4A
AVDD4A
AVSS3
AVDD2
AVDD1C
AVSS1B
AVDD1B
AVSS1A
AVDD1A
DVSS1_11
DVDD1_11
DVSS1_10
VSS_3
DVDD3
DVSS1_9
DVDD1_9
DVSS1_8
DVDD1_8
DVSS1_7
DVDD1_7
DVSS1_6
DVDD1_6
DVSS1_5
DVDD1_5
DVSS1_4
DVDD1_4
DVSS1_3
DVDD1_3
DVSS1_2
DVDD1_10
C835
0.1
C811
0.1
C816
47
6.3V
L806 10µH
C821 100p
CL8029
C838 10 6.3V
C839
0.1
VOUT
C8864
470p
C853
0.1
L803
10
R841
10
L804
10
CL8055
D801
HRC0201ATRF-E
REG5_REG
C846
0.1
VSS
NC
C845
47
6.3V
L802
22µH
FCRAMVDD
C8859
1000p
R866
1M
Q802
XP152A12C0MR
EBIFVDD2
VIN
REG_F
(Page 33)
EBIFVSS2
C856
0.1
CL8001
REG5_VSTB
S
EBIFVDD3
R802
0
X801
48MHz
3.3V
EBIFVSS3
SRAMVDD1
EBIFVDD1
C836 10 6.3V
DCLSOUTL
(Page 30)
DVDD1_2
DCLSOUTL
R807 2.2k
DCLSOUTR
FB808
0
R806 4.7k
DCLSOUTR
R801 4.7k
REG4_DVDD
XMUTE
XMUTE
DVSS1_1
SUSPEND
AVDD3
USBHOLD
SUSPEND
FS512
AVSS2
USB_HOLD
D_VCONT_PWM
D_VCONT_PWM
DVDD25SVADC
UDM
DVDD1_1
UDP
R805 22
DVSS1_0
DVDD1_0
UOSCO
R804 22
UDM
SRAMVSS0
UOSCI
DTCK
SRAMVDD0
UPUEN
FS512
UDP
S
EBIFVDD4
SRAMVSS1
OSCO
X802 22.5792MHz
FCRAMVDD0
C802
6p
(Page 28)
Q801
2SK1830-TE85L
EBIFVSS4
XBCK
C801
FB807
0
R865
1M
EBIFVDD5
LRCK
XBCK
REGO3
Q801,802
B+ SWITCH
C822
0.1
C823
0.1
C818
10
6.3V
C820
0.1
C819
47
6.3V
C850
0.1
VB
ADDT
VIN
REG5_REG
AMICE_FS256
FCRAMVDD
MDVCC_CTL
MDVCC_CTL
AMICE_FS256
L801 10µH
(Page 33)
MZ-RH10
32
32
MZ-RH10
6-12. SCHEMATIC DIAGRAM – MAIN Board (9/9) –
• See page 24 for Waveforms. • See page 36 for IC Block Diagrams.
(9/9)
+2.1V REGULATOR
IC302
XC6219B212MR
SDO0
CE
SCK0
NC
VSS
SDO0
C320
2.2
6.3V
L303
10µH
B+ SWITCH
C328
1
C323
10
6.3V
SCK0
OPT_DET
OPT_DET
C324
0.1
XJACK_DET
XJACK_DET
DIN1
ADDT
C202
1
R201
47k
C102
1
R101
47k
C303
0.1
R301
1k
XOPT_CTL
C319
0.1
C321 47 6.3V
R314
0
C322 0.1
VIN
Q301
2SA2018TL
R304
100k
VOUT
C327
1
R306
10k
DVCC
DGND
DIN1
D-IN
R305 100
J301
XJACK_DET
DIN1
LINE IN
XOPT_CTL
FB3301
R303
XOPT_CTL
ADDT
(OPT)
FB1101
R310 1k
RIN
VCOM
AVSS
A/D CONVERTER,
CDTI
C318
2.2
6.3V
CCLK
MICL
PDN
PREOL
XPD_ADC
PRENL
CSN
GND
R206
10k
C311 0.1
MVSS
IC301
AK5356VN-L
XCS_ADC
OPT_DET
C312
47 6.3V
MVCM
MIC AMP
XMIC_DET
C101
100p
R207
22k
R107
22k
R106
10k
R302
C3304 0.01
R309 1k
SCK0
MRF
C201
100p
C3305 0.01
SDO0
MPWR
R103
22k
C3331 100p
XPD_ADC
XMIC_DET
XPD_ADC
MCLK
LRCK
MVDD
PRENR
LRCK
R203
22k
C3332 100p
FS256
XCS_ADC
FB2201
C310
10
6.3V
LIN
PREOR
XBCK
XBCK
XCS_ADC
PRER
(Page 32)
AVDD
BCLK
DVSS
XBCK
PREL
LRCK
LRCK
SDTO
FS256
DVDD
ADDT
FS256
C313
47
6.3V
MICR
R307
100
XMIC_DET
J302
C314 0.1
FB2202
MIC
C315 10 6.3V
(PLUG IN POWER)
FB1102
C316 22 6.3V
C208
4.7
6.3V
FB3302
C205
0.1
R312
10
L1
L2
C3301
100p
C108
4.7
6.3V
C325
0.1
(Page 29)
C105
0.1
C3302
2200p
C206
1000p
C107
47
4V
M1
C106
1000p
C204
2200p
C104
2200p
C3308
1000p
D3305
EDZTE616.8B
C3309
1000p
C3306
4700p
C207
47
4V
M2
FCRAMVDD
R892
220k
FFCLR
-1
M3
-2
Q885,886
(Page 28)
R872
10k
Q886
XP4314-TX
B+ SWITCH
R884
470k
(Page 32)
VDD
IC882
R1180Q221B-TR-F
CE
+2.2V REGULATOR
S
GND
D881
MA2SD32008S0
L881
100µH
VOUT
Q885
RTL035N03
C891
0.1
D884
MA2Z748001S0
FCRAMVDD
DC/DC
REG5_REG
CONVERTER
R881
220k
R883
1M
D882
MA2SD32008S0
D885
MA2Z748001S0
IC881
MM3005BNLE
VSS
NC
-1
VOUT
LX
C883
10
6.3V
CE
-2
R882
470k
Q881
RT3WLMM-TP-1F
C885
1
R890
220k
R886
100k
C886
0.01
R885
1M
Q881,883
REGULATOR CONTROL
MZ-RH10
33
33
(Page 32)
-1
-2
Q884
XP4314-TX
VOLTAGE
D883
MA2SD32008S0
Q883
RT1N144U-TP-1
C884
10
6.3V
C887
1
C895
0.1
R887
100k
R873
10k
VB
DETECT
R893
2.2M
DRAM_HOLD_DET
R888
220k
DRAM_ALONE
DRAM_VDD_CLR
MZ-RH10
6-13. PRINTED WIRING BOARD – MAIN Board (Component Side) –
1
• Semiconductor
Location
7
8
9
10
11
S890
(PROTECT DETECT)
S890
S891
HI-MD
PROTECT DETECT
S891
OPTICAL
PICK-UP
BLOCK
(ABX-UJ)
MAIN BOARD
Q881
C716
R925
R934
+
R969
3
IC903
1E 1B 2C
R462 R466
R305
C303
R302
C311
+ C320
C884
+ C310
R496
R364
C253
C153
FB3353
FB3357
RGND
4
1
2E 2B 1C
2E 2B 1C
R497
C4416
C420
1
3
R486
R419
R418
Q402
S D D
4
IC471
R420
C481
A
K
G D D
5
11
LF401
1-866-346-
D450
2
Q493
C419
R415
D438
R866
Q905
R414
R481
A
K A
LF4451
C856
2C 1B 1E 3
7
6
5
1
IC804
D D S
D
Q492
S
D D G
34
C823
Q801
D
MZ-RH10
KEY_R
THP401
CN451
(USB)
R476
D D G
R865
D
J
4
K
R923
R939
C255
+
C417
TH801
R898
Q904
2C 1B 1E
FB3355
C155
C371
C808
C857
R815
C843
R885
K
A
D801
D
Q451
34
C452
4
G
R968 R966
1C
2B
2E
i
RVDD
R477
1E
1B
2C
C453
Q906
C933
C961 R908
2
1
R920
1C 2B 2E
1
R488
Q609
C915 +
C958
A D458 D D S
R467
1
R464
C888
R413
Q802
C8859
K
J351 (1/2)
C480
R417
L606
Q452
R924
C932
C931
+
R922
R935 R434
C940
C939
R933
C948
R929
C945
C421
C936
C935
R936
64
R926
I
49
L903
5
C3374
G D S
R463
R914
+
C954
R917
R817 R818 R819
S893
OPEN/CLOSE
DETECT
DTCK
8
D
S893
L252
R877
R455 R456 C8858
R918
R355
C809 R821 R822
C4418
G
S
L152
4
Q603
+ C652
A
+
C355
D3352
C853
K
48
1
+
C356
C9001
Q612
C946
R927
R873 C895
IC882
+ C313
B C E Q803
C810
1
5
+ C923
IC901
C937
4
5
D906
R930
BCE
C820
IC891
8
GDS
D905
C885
C827
C861
C903
D904
R912
R903
16
1
Q883
+
+
+ C316
2
C811
4
R910
R977
C901
C9957
R976
8
R306 C3331
+ C315
C892 R895
8
5
R897
C658 +
IC604
C669
1
C902
17
R967
H
33
R904
32
A K
C920
C918
C959
2S 2G 1D
C919
C887
C817
R837
R906
C908
R907
L904
Q901
+ C208
1
C906
2D 1G 1S
C3305
R304
R879 R880
2C
1B
1E
4
L801
L607
R842
2E
2B
1C
2
R612
1
C668
3
G
D
D
R605
2
4
C619
C621 +
C677
3
C659
R659 C625
S
D
D
1C 3
2B
2E 4
C816
C601
C620
3
Q616
Q618
4
2
C673
IC606
+ C916
1
R662 R663
G
1C
2B
2E
R661 R660
R691
1E
1B
2C
R683 R685
K
1E 1B 2C
R619
IC607
C611
D604
Q611
R684 R682
Q608
Q617
D D G
1C 2B 2E
A
+
C662
F
D882
R888 C814
C818
D D S
1E
1B
2C
D883 K A
A K
K
Q885
Q886
56
D885 D884
D
D
S
1
BCE
R887
C839
1
R872 R893
4
2C
1B
1E
D
D
G
A
R713 C712 C713
C891
26
3
R892
IC602
2E
2B
1C
C705
1
43
5
C706
3
+ C312
C319
R712
42
FB5501
4
R711
C715
E
L881
IC881
IC701
C714
Q301
A K
C707
R707
5
D881
C883
C708
C701
C573
+
R899
C702
CN501
R883 R881 R886
C709
R710
R708
C570 +
C710
C886
14
R820 R894
15
28
C703
R709 29
L507
C3302
R882
R884 2E 2B 1C R890
Q884
1
C717
D
R618
C3304
2C 1B 1E
R301
K
A
R303
C4438
C4427
J301 (1/2)
LINE IN
(OPT)
C3332
D4441
A
D-9
H-8
J-5
I-5
J-6
I-6
H-5
F-2
H-4
F-2
H-4
F-4
G-4
F-3
I-6
H-6
G-6
D-7
F-7
E-7
E-6
F-5
G-2
I-5
I-5
J-3
6
(COMPONENT SIDE)
R937
Q301
Q402
Q451
Q452
Q492
Q493
Q603
Q608
Q609
Q611
Q612
Q616
Q617
Q618
Q801
Q802
Q803
Q881
Q883
Q884
Q885
Q886
Q901
Q904
Q905
Q906
C
K
H-9
F-5
F-5
G-3
F-4
E-6
I-6
E-8
E-7
F-8
H-3
I-4
5
B
R938
IC471
IC602
IC604
IC606
IC607
IC701
IC804
IC881
IC882
IC891
IC901
IC903
4
A
R646
H-8
I-8
I-5
F-3
H-6
D-8
E-7
E-7
E-7
E-6
H-4
H-2
H-4
G-9
D-2
C924
D438
D450
D458
D604
D801
D881
D882
D883
D884
D885
D904
D905
D906
D3352
D4441
3
+
Ref. No. Location
2
: Uses unleaded solder.
(11)
MZ-RH10
6-14. PRINTED WIRING BOARD – MAIN Board (Conductor Side) –
1
2
3
: Uses unleaded solder.
4
5
6
7
9
10
11
12
1
U
S892
(HALF LOCK)
NICKEL METAL HYBRID
RECHARGEABLE BATTERY
NH-14WM
1PC. 1.2V 1400mAh
N
M702
(SLED)
W
V
U
240 243
178 244
230 193
187 3
300 291
56 82
219 241 221 247 270 152 69 67 25 70 65 184 196
36 81
24 175 245 250 267 264 72 71 26 66 51 136 134
23
68
298
121 133
123 128
126 127
IC801
∗
K A
Q602
A D605
C653
R6620
DRY BATTERY
SIZE “AA”
(IEC DESIGNATION R6)
1PC. 1.5V
HR601
OVER WRITE
HEAD
(BATTERY CASE)
MZ-RH10
35
C564
+
ECB
A
C519 C523
C528
C536
C539
R423
R438
C538
R517 C559
C529
C566
C531
C525
L605
C648
2D
1G
1S
+
C4429
D607
J402
R421 R424
C630
C634
CL604
D608 K A
C6676
K
+
6
5
4
3
2
1
Q407
R436
12 16 20 26 32
11 15 19 25 31
24 30
10
23 29
9
8 14 18 22 28
7 13 17 21 27
IC401
∗
+
C426
+ C402
R625 R6621
C6649 2S
2G
1D
W402
K A
C409
C408
A
W602
A
C537
C547
C527
C517
C516
C511
C515
C604
R608
R647 R679
+
K A
K
K
J
DC IN 3V
+
–
R654 C671
C612
C812
C4428
R4460
SWITCH
UNIT
+
C411
+ C922
D606
R432
+ C637
L603
+ C635
8
R433
+ C909
D443
C646
C4456
+
2D
W601
CL453
C4466
CN471
1D
K
K
D4456 C4467
D457
R801
IC491
C623
R624
R495
R494
5
D4442
FB4451
C622
5
D444 A K
R629
L601
D6615
Q601
C4455
FB4452
R617
C628
S D D
C641
5 7 10 14 18 22 25 27 31 30
4 6 9 13 17 21 24 26 28 29
1
Q432
Q442
R616
C642
C633 C638 R689
G D D
R675
L906
1G S 2G
1
4
33 32
A
Q403
L901
R648
45
41
37
34
C645
C627 +
R6622
D6616
A
3
4
D4436
112 3
1 2
C616 +
K
C491
A
K
A
CL460
(GND)
110 111
R6623
R499
D491
18
A
R482
L491
K
D803
47
43
39
36
D602
R804 CL8055
C492
D
+
46
42
38
35
R857
C6680
G
R472
R805
R806
R492
R858
R861
S
R491
R490
R478
2C C479
(CHASSIS)
1
R807
Q491
99 100
48
103 104
44
107 12 16 20 40
8 11 15 19 23
K
X801
L802
C828
97 98
101 102
105 106
108 109
SL801
C819
+
C675
D613
124 125
R836
D601
R829
223 248 262 265 268 271 179 216 218 62 76 73 131 188 320 316 317 315 206 130 129 120 122
249 263 266 269 272 251 252 177 181 75 74 198 205 319 318 314 21 22 55 132 35
R957
C4485
I
R878
A
64
R813
G
D
D
35
(CHASSIS)
8
+ C403
5
1-866-346-
20 261
80 234
FB8803
(CHASSIS)
S
D
D
K
192 183
135 186
294 1
R442 R441
225 190
227 189
228 59 226
231 224
185 2
R649
C4465
D440
R401
305 301
191 195
53 52
50 49
Q433
BCE
16
153
210
154
164
155
209 171 170 166 157
92 79 75 71 67 64
95 96 76 72 68 51
Q441
R961
17
163
256 259 214
232 215
19 161
90 91
93 94
R960
203 18
258 260
173 253
257 255
233 235
R422
1E 1B 2C
CL658
R425
202 212
254 204
R437
1C 2B 2E
R651
Q401
D4443
C406
W401
C4463 K
CL433
(GND)
A
J-10
F-11
H-10
G-11
I-4
H-2
I-5
G-8
H-8
J-8
I-7
J-7
I-8
G-8
F-8
H-7
F-2
C-5
I-4
J-9
J-5
I-7
I-7
IC301
IC302
IC351
IC401
IC491
IC501
IC601
IC605
IC801
D-4
D-4
F-3
H-10
I-6
D-9
G-8
F-8
G-5
Q151
Q251
Q351
Q352
Q353
Q401
Q403
Q406
Q407
Q432
Q433
Q441
Q442
Q471
Q491
Q502
Q503
Q504
Q601
Q602
G-2
G-2
G-2
F-2
F-2
I-11
F-11
F-11
H-10
G-11
E-11
F-11
G-10
H-3
H-5
E-11
D-11
E-9
I-7
I-8
Q502
R443
CL935
C415
197 229
L907
R690
R6694
C407
292 303
R678
IC601
∗
C424 +
ECB
C558
Q406
R426
60
R514
L506
R686
C412
172
R513
1E 1B 2C
R681
213 200
ECB
Q503
L505
C636 R693
85 84 82 80 77 73 69 65 62 60 58 57
86 87 83 81 78 74 70 66 63 61 59 56
55 54
88 89
R8813
R516
C560
C545
C672
C644
199 194
R515
C552
C533
D401
D440
D443
D444
D457
D471
D491
D601
D602
D605
D606
D607
D608
D613
D614
D803
D3305
D4435
D4436
D4443
D4456
D6615
D6616
C4462
C553
1C 2B 2E
L608
R962
296 174 290
+
R505
C567 +
R687
169
C530
R664
R6695
3
1
R653 C602
A K
29
W403
C554
C666
R628
D614
R645
158 160 142
5
A K
302 4
304 207
IC605
4
K A
63 211
288 53
299 293
307 306
308 309
C609
168 208
297 285
287 289
45 145 143 144 46
167
295
R814
42 99
101 141
C850
C550
C643
C607
C835
+
112 32
116 34
C493
1C
K
D471
Q504
+
30 15
220 246
1B E 2B
Q471
ECB
C565
C830
R823
R810
57 286
31 159
79 61
R868
118 111 239 54 277 40 108 107 283 281 147 148 137
156 201
162 165
242 176
180 182
217 222
R484
R480
A
R473
R489
C555
R520
CL8001
284 78
279 5
J351 (2/2)
i
R524
C801
FB807
R802
C813
C847
R835
R843
R834
5
C3372
FB3351
R519
C650
C822
VDR8861
SL802
C526
C6674
C845
R361
C846 R841
R365
R354
R255
C821
R493
R366
C354
R827
+
R353
S DG
F351
FB2251
R352
C364
L806
104
115
48
52 27 140 139 276 274 44 113 14 37 146 149 138
105
33 41
R256
R251
4
FB1151
8
R155
Q351
R156
C352
R151
Q151
8
1
R808
282 77
110 106
119 100
C361
S DG
+
1
114 109
CL8029
+
C154
R518
117 102 238 313 273 237 98 96 94 97 92 9 90 89 86 85 87 50 310 6 47 49 38
58 236
280 278
R812
C803
Q352
Q251
1
IC351
C370
ECB
C351
R351
R359
C254
R501
R502
28 103 13 275 39 43 12 11 95 10 93 91 88 7 8 84 83 311 312 151 150
C805
+
CL515
L804
+
C838
FB8810
9
2B E 1B
R362
R360
1C
Q353
C3309
G
16
R356 C381
C3308
2C
CN701
L303
10
FB808
C552
FB5503
C524
5451 48 45 43 42 40 37 34 31
5552 49 47 44 41 38 36 33 30
5653 50 46
39 35 32 29
1 4 7 11
18 22 25 28
2 5 8 10 13 16 19 21 24 27
3 6 9 12 14 15 17 20 23 26
C521
L803
X802
FB802
R811
R357
A K
R307
+
C4458
D3305
C362 +
CL518
+
C836
C318 +
C804
R207
C360
R206
C8864
+
L503
IC501
∗
+
C556
28
C365
C367
R526
R525
CL511 C557
R854
22
CL362
MIC
(PLUG IN POWER)
L502
C802
1
21
+
+
C520
C314
J302
H
IC301
C207
F
7
R312
FB2202
E
C518
SL894
L504
8
R358
C204
FB1102
C205
C206
FB3302
(CHASSIS)
C105
R107 R106
C104 C106
C3306
SL891
W404
C328
15
+
K
C4425
C323
14
C107
A
R314
R309
R310
C108
4
S894
BATTERY
INSERT DETECT
D4435
C4459
R203
C325
+
3
IC302
C102
C101
D
5
C322 C324
R101
1
C321
R103
C201
FB1101
C202
R201
FB2201
LINE IN
(OPT)
C327
J301 (2/2)
V
N
A K
W
10
FB3301
R860
C
C513
C3301
M701
(SPINDLE)
C6679
C8893
C613
R8892
OFF
R8981
S895
HOLD
HOLD
M703
OVER WRITE
HEAD UP/DOWN
M
SL892
S895
C614
B
• Semiconductor
Location
Ref. No. Location
MAIN BOARD (CONDUCTOR SIDE)
A
8
1
4
D401
C4464
(CHASSIS)
11
(11)
MZ-RH10
• IC Block Diagram
IC301 AK5356VN-L
PREOR
PRENR
PRER
PREL
PRENL
PREOL
MICL
IC351 NJU8716AV (TE2)
21
20 19
18 17
16
15
VREGO
CFB
VG
VREF
VSS
MICR 22
14 PDN
RESET
1
2
3
4
5
MVDD 23
MVCM 25
VCOM
MRF 26
MPWR 27
13 CSN
12 CCLK
11 CDTI
CONTROL
REGISTER
INTERFACE
MVSS 24
MIC POWER
SUPPLY
MCK 6
16 VREG
LOW VOLTAGE
DETECTOR VDD
REGULATOR
LEVEL SHIFTER
VDD 7
10 LRCK
9 MCLK
8 BCLK
IN2 8
LIN 28
LEVEL SHIFTER
15 VDD2
HEADPHONE
AMP (P–N)
PRE
DRIVER
LEVEL SHIFTER
A/D
CONVERTER
LOW VOLTAGE
DETECTOR VRGO
PRE
DRIVER
14 OUT2
13 VSSO
12 VSSO
11 OUT1
HEADPHONE
AMP (P–N)
AUDIO
INTERFACE
CONTROLLER
10 VDD1
LEVEL SHIFTER
9 IN1
1
2
3
4
5
6
7
RIN
VCOM
AVDD
AVSS
DVSS
DVDD
SDTO
VCOM
I_CTL3
A/D
GND
I_CTL1
24
23
22
21
20 19 18 17
PGND
RS
I_SEL
AD_SEL
IC401 MM1690NCBE
A/D
CONVERTER
BAT– 25
RF1 26
IC302 XC6219B212MR
IC471 XC6219B242MR
16 TYPE2
IAMP_CAL 27
15 CFB
AMP_SEL 28
14 IAMP_CTL
+ –
VCC
5 VOUT
VIN 1
+
–
+ –
CURRENT
LIMIT
+ –
VOLTAGE
REFERENCE
VSS 2
13 A7CAL_SW
VREF
VREF
I_CTL2 29
VCC
CHG_SW1 30
CE 3
ON/OFF
CONTROL
4 NC
12 IN1–
BAT+ 31
VO 32
11 TYPE1
TIME
DIVIDER
OSC
10 WDT
SWITCHING
CHARGE
CONTROL
ON/OFF
CONTROL
RECEIVER
DET
SWITCHING
CIRCUIT
COMPARATOR
BLOCK
CHARGE CONTROL
ON/OFF
–
+
ERROR LED
CONTROL
VREF
MZ-RH10
36
36
9
WAKE-UP
CONTROL
1
2
3
4
5
6
7
8
VI2
VG
PWT
VI_CTL
CHG_SW2
VI
CHG_CTL
PWR_WAKE
CHARGE SWITCH
CONTROL
LED_CTL
MZ-RH10
IC491 XC9103D092MR
CURRENT
RIPPLE DETECT
& FB
FB 1
PHASE
COMPENSATION
VCC
VDD 2
PWM COMPARATOR
+
BUFFER,
DRIVER
–
+
–
ERROR AMP
VREF WITH
SOFT START
& CE
5 EXT
4 GND
RAMP WAVE
GENERATOR,
OSC
PWM/PFM
CONTROLLER
CE 3
ABCD
ADIP-IN
VC
CIG
DGND
XRESET
VGIN
SBUS
SCK
CPOUT
CP
DVCC
42 41
40
39
38
37
36
35
34
33 32
31 30 29
TE
FE
IC501 SN761059AZQLR
SERIAL
INTERFACE
28 CN
27 CPGND
26 CLK
POWER
SUPPLY
VCC2
VCC
TEMP
A+B+C+D
I+J
NPP
TON
CSL
AW+DW
TON PEAK
TON BOTM
ADIP
TE
TWPP
PK/BTM
AW
CSLO
NPPO 43
AVCC2 44
VCC2
OFTRK
OFTRK 45
T-ON
TON-C 46
ADIP
BOTM 47
PEAK 48
D
A
B
C
PEAK/
BOTTOM
49
50
51
52
AVCC 53
S-MONITOR
VREF09
A-C
D-C
MALFA
MIJ
AWBPF
DW
DWBPF
OFTTH
APC
ADIP-BPF
VFREF0.4
I-J
25 CCSL2
24 CDN
23 ADFG
22 WPP-LPF
TPP/WPP
TE
21 SMON
ABCD
20 PD-BUF
19 PD-NI
18 PD-I
VCC
APC
JX 54
JY 55
LY 56
FE
17 PDO-SOURCE
16 PDO-SINK
RF
1
2 3
4
5 6
7
8
9
10 11 12 13
14
LX
PS
EQ
AGND
OFC-C1
OFC-C2
VREF10
RFO
VREF09
RF_LX
RF_LY
RF_JY
RF_JX
D-C
15 A-C
37
MZ-RH10
OUTA
VG
OUTB
VRECIN
VRECIN
PGND2
HA
HB
PGND4
CL
VCP
VG2
GND
CH
HAB
HBB
GND
RECP
VG3
PGND4
VBUSSEL2
EFM CLK
EFM
VIF
CLK
DATA
SCK
NC M12
IC601 SC901585VAR2
84
83
82 81 80
79
78 77
76
75 74 73 72 71
70 69
68
67
66 65
64
63 62
61
60
59 58
57
CHARGE PUMP
VG
VG3
VIF
NC A12 85
56 LATCH
EFM BOTTOM
PRE DRIVER
HOLD OUT 86
RST OUT 87
55 XWKO
WAKE
CONTROL
HOLD
LOGIC
BUFFER
LVDT
VBUS
EFM TOP
PRE DRIVER
PVBUS
53 WAKEC
PVBUS 88
VBUS
CRST 89
52 V33UO
51 VBUS DET
LVDT
DVDD IN 90
DVDD OUT 91
54 VBUS
DAC
SYSTEM
BANDGAP
REFERENCE
50 VBUSREF
49 L5 2
HOLDC 92
48 PGND5
47 PGND5
OSC OUT 93
2.0V
RESET
SLEEP IN 94
CONTROL
46 POWFB
RST IN 95
45 L5 1
PGND2 96
RESET
LOGIC
REG IN 97
REG OUT 98
H-BRIDGE
DRIVER
44 PGND5
43 VBUSSEL
SUS IN 99
42 CLM
PGND2 100
41 POWP2
TSBV IN 101
TSBV OUT 102
40 INP3
39 INP2
POWER SWITCH
DRIVER
CIRCUIT
V33R 103
38 CLP
PGND1 104
37 POWP1
BUS POWER
STEP DOWN CONVERTER
DRIVER
VSTB IN 105
VSTB OUT 106
BATSEL 107
VPDRV
36 VPDRV
SELFPOWER
STEP UP-DOWN CONVERTER
DRIVER
V33RO 108
35 RF2
34 DTC2
RF1 109
33 INM2
INM1 110
32 INM3
DTC1 111
PWM
DAC
31 DTC3
PWM
VREC
VREF
BUFFER
VREC STEP UP-DOWN
CONVERTER DRIVER
VREC 112
30 RF3
V3 STEP UP-DOWN
CONVERTER DRIVER
29 NC M1
VC
VDD 1
GND 2
CE 3
38
REGULATOR
5
VOUT
4
ECO
CURRENT
LIMIT
9 10
11 12 13 14 15 16
17
18
19 20
21 22
23
24 25 26 27
28
GND
PGND1
VC
VC
PGND3
PGND1
UP 3B
VREF IN
PGND3
PGND3
V3C 1
V3C 2
33USEL
L3 1
L3 2
DW 3T
DW 3B
V3FB
DW 1B
DW 1T
VRECO 2
VRECO 1
L1 2
L1 1
IC602 R1160N121B-TR-FA
8
INP1
2 3 4 5 6 7
UP 1T
UP 1B
1
NC_A1
V3FB
MZ-RH10
VC LOW
VOLTAGE
DETECTOR
3PHASE
CONTROL
CH1
VI1 1
WI1 2
CPWO2B
CPVO2B
CPUO2B
PWM2
UI2
50
49
48
47 46 45
44 43
VC
VG
VC
OE
51
GND
54 53 52
VC
CPUO1
CPVO1
CPWO1
56 55
VG
UI1
PWM1
IC701 SC901583EPR2
VC
BIAS
3PHASE
CONTROL
CH2
ROE
42 VI2
41 WI2
GNDW1 3
40 GNDW2
VG
WO1
VMVW1
VO1
GNDUV1
VC
VC
3PHASE
PRE DRIVER
CH1
4
5
6
7
VG
3PHASE
PRE DRIVER
CH2
39
38
37
36
UO1 8
WO2
VMVW2
VO2
GNDUV2
35 UO2
VMU1 9
34 VMU2
VG
VMR1 10
RO1 11
PGND1 12
VC
VG
VC
H-BRIDGE
PRE DRIVER
CH1
33 VMR2
32 RO2
31 PGND2
H-BRIDGE
PRE DRIVER
CH2
FO1 13
30 FO2
VMF1 14
29 VMF2
VG VC
HI-BRIDGE
CONTROL
CH2
22
23
24
25 26
27
28
FI2
21
VC
–
U
+
RI2
COM1
CPUI1
20
VC VG
–
V
+
CPUI2
COM2
RI1
19
VC VG
–
W
+
CPVI2
17 18
VC VG
–
W
+
CPWI2
16
CPVI1
15
FI1
H-BRIDGE
CONTROL
CH1
VG VC
–
V
+
ZI1
–
U
+
ZI2
VG VC
CPWI1
VC
IC881 MM3005BNLE
ON/OFF 1
VOUT 2
SOFT
START
VOLTAGE
REFERENCE
5 VOUT
+
–
PWM
CONTROL
NC 3
4 VSS
39
MZ-RH10
IC891 AK6512CM-E2
8 VCC
CS 1
7 HOLD
INSTRUCTION
DECODE
CONTROL
&
CLOCK
GENERATION
SO 2
WP 3
STATUS
REGISTER
VPP
GENERATOR
VREF
VPP
SWITCH
ADD
BUFFERS
DECODER
GND 4
EEPROM
64K bit
8192 × 8
R/W AMPS
&
AUTO ERASE
INSTRUCTION
REGISTER
DATA
REGISTER
6 SCK
5 SI
REGI3
REGO3
REGC3
MUTEON
DW 2B
DW 2T
VC2
VCIN
VCO2
VO2
L2
L2
PGND2
PGND2
XRST2
CRST2
IC901 SC901584EPR2
48
47
46
45
44 43
42
41
40
39
38 37 36 35
34
33
RESET 2
SERIAL
PASS
REGULATOR 3
POWER
SWITCH 2
REGC2 49
REG2G 50
REGO2 51
REGI2 52
RST2
VC2
STEP
UP-DOWN
DRIVER
RST2
VC2
MUTING
BUFFER
SERIAL
PASS
REGULATOR 2
REF2
VREF
PWM
32 DTC2
REGC1 53
VREF
RST1
REF2
31 RF2
MUTE ON
REGI1 55
SERIAL
PASS
REGULATOR 1
SEQSEL
REGO1 54
RST2
30 INM2
29 VGSEL1
28 VGSEL2
VB
27 VB
VG SELECT, VG DUTY
VREF0
GND 56
26 PGND3
VC
BANDGAP
REFERENCE
VREF 57
25 LG
24 VG
STEP UP
DC/DC CONVERTER
START UP
CLK
23 C1L
REF1
REF2
REF3
REF4
REF5
REF1
22 INM1
VC
VREF0
21 RF1
VREF
REF DAC
20 DTC1
RST1
58
59
60
61
62
63
64
RST1
LVB
DRIVER
PWM
CONTROL
40
19 XRST1ADJ
18 CRST1
REF1
VC
VC
VREF
RST2
VC
STEP
UP-DOWN
DRIVER
VREF
1 2 3 4 5
6
7
8
9
10
11
12
13 14 15 16
VRMC
LVB
HVB
VTSB
VC1
VCO1
VO1
L1
L1
PGND1
PGND1
POWER
SWITCH 1
FFCLR
XWK4
XWK3
XWK2
XWK1
FFCLR
DATA
STRB
CLK
WDT
SEQSEL
CLK
SLEEP
RESET 1
17 XRST1
MZ-RH10
• IC PIN FUNCTION DESCRIPITION
IC801 CXD2681-225GG (SYSTEM CONTROLLER, DSP)
Pin No.
Pin Name
I/O
Description
1
DVDD1_0
-
Power supply terminal (DSP logic system)
2
DVSS1_0
-
Ground terminal (DSP logic system)
3
DVDD1_1
-
Power supply terminal (DSP logic system)
4
DVSS1_1
-
Ground terminal (DSP logic system)
5
DVDD1_2
-
Power supply terminal (DSP logic system)
6
DVSS1_2
-
Ground terminal (DSP logic system)
7
DVDD1_3
-
Power supply terminal (DSP logic system)
8
DVSS1_3
-
Ground terminal (DSP logic system)
9
DVDD1_4
-
Power supply terminal (DSP logic system)
10
DVSS1_4
-
Ground terminal (DSP logic system)
11
DVDD1_5
-
Power supply terminal (DSP logic system)
12
DVSS1_5
-
Ground terminal (DSP logic system)
13
DVDD1_6
-
Power supply terminal (DSP logic system)
14
DVSS1_6
-
Ground terminal (DSP logic system)
15
DVDD1_7
-
Power supply terminal (DSP logic system)
16
DVSS1_7
-
Ground terminal (DSP logic system)
17
DVDD1_8
-
Power supply terminal (DSP logic system)
18
DVSS1_8
-
Ground terminal (DSP logic system)
19
DVDD1_9
-
Power supply terminal (DSP logic system)
20
DVSS1_9
-
Ground terminal (DSP logic system)
21
DVDD3
-
Power supply terminal (DSP logic system)
22
VSS_3
-
Ground terminal (DSP logic system)
23
DVDD1_10
-
Power supply terminal (DSP logic system)
24
DVSS1_10
-
Ground terminal (DSP logic system)
25
DVDD1_11
-
Power supply terminal (DSP logic system)
26
DVSS1_11
-
Ground terminal (DSP logic system)
27
Power supply terminal (for PLL)
AVDD1A
-
28
AVSS1A
-
Ground terminal (for PLL)
29
AVDD1B
-
Power supply terminal (for RFA of asymmetry correction cell)
30
AVSS1B
-
Ground terminal (for RFA of asymmetry correction cell)
31
AVDD1C
-
Power supply terminal (for ASYO of asymmetry correction cell)
32
AVDD2
-
Power supply terminal (for A/D converter)
33
DVDD25SVADC
-
Power supply terminal (for A/D converter)
34
AVSS2
-
Ground terminal (for A/D converter)
35
AVDD3
-
Power supply terminal (for A/D converter)
36
AVSS3
-
Ground terminal (for A/D converter)
37
AVDD4A
-
Power supply terminal (for PLL)
38
AVSS4A
-
Ground terminal (for PLL)
39
AVDD4B
-
Power supply terminal (for PLL)
40
AVSS4B
-
Ground terminal (for PLL)
41
AVDD4C
-
Power supply terminal (for D/A converter)
42
AVSS4C
-
Ground terminal (for D/A converter)
43
AVDD5
-
Power supply terminal (for PLL)
44
AVSS5
-
Ground terminal (for PLL)
45
AVDD6
-
Power supply terminal (for A/D converter)
46
AVSS6
-
Ground terminal (for A/D converter)
41
MZ-RH10
Pin No.
Pin Name
I/O
47
DAVDD
-
48
DVDD25LPF
-
Power supply terminal (for D/A converter)
49
DAVSS
-
Ground terminal (for D/A converter)
50
OSCVDD
-
Power supply terminal (for 22.5792 MHz OSC)
51
Description
Power supply terminal (for D/A converter)
USBOSCVDD
-
Power supply terminal (for the USB 48 MHz OSC)
52
TSMVDD
-
Power supply terminal (for the TSB master communication)
53
MAIFVDD
-
Power supply terminal (for MA interface)
54
MSJTAGVDD
-
Power supply terminal (for MS interface and JTAG)
55
USBIFVDD
-
Power supply terminal (for USB interface)
56 to 58
VSS_0 to VSS_2
-
Power supply terminal (for 22.5792 MHz OSC, USB 48 MHz OSC, TSB master communication,
MS interface, MA interface, JTAG and USB interface)
59 to 62
IFVDD_1 to
IFVDD_4
-
Power supply terminal (for interface)
63, 64
IFVSS_1, IFVSS_2
-
Ground terminal (for interface)
65 to 69
DRAMVDD0 to
DRAMVDD4
-
Power supply terminal (for D-RAM/DSP interface)
70 to 72
DRAMVSS0 to
DRAMVSS2
-
Ground terminal (for D-RAM/DSP interface)
73
FCRAMVDD0
-
Power supply terminal (for D-RAM)
74
FCRAMVSS0
-
Ground terminal (for D-RAM)
75
FCRAMVDD1
-
Power supply terminal (for D-RAM)
76
FCRAMVSS1
-
Ground terminal (for D-RAM)
77
FVDD0
-
Power supply terminal (for flash memory)
78
FVSS0
-
Ground terminal (for flash memory)
79
SRAMVDD0
-
Power supply terminal (for S-RAM)
80
SRAMVSS0
-
Ground terminal (for S-RAM)
81
SRAMVDD1
-
Power supply terminal (for S-RAM)
82
SRAMVSS1
-
Ground terminal (for S-RAM)
83
EBIFVDD0
-
Power supply terminal (for external flash memory bus interface)
84
EBIFVSS0
-
Ground terminal (for external flash memory bus interface)
85
EBIFVDD1
-
Power supply terminal (for external flash memory bus interface)
86
EBIFVSS1
-
Ground terminal (for external flash memory bus interface)
87
EBIFVDD2
-
Power supply terminal (for external flash memory bus interface)
88
EBIFVSS2
-
Ground terminal (for external flash memory bus interface)
89
EBIFVDD3
-
Power supply terminal (for external flash memory bus interface)
90
EBIFVSS3
-
Ground terminal (for external flash memory bus interface)
91
EBIFVDD4
-
Power supply terminal (for external flash memory bus interface)
92
EBIFVSS4
-
Ground terminal (for external flash memory bus interface)
93
EBIFVDD5
-
Power supply terminal (for external flash memory bus interface)
94
EBIFVSS5
-
Ground terminal (for external flash memory bus interface)
95
EBIFVDD6
-
Power supply terminal (for external flash memory bus interface)
96
EBIFVSS6
-
Ground terminal (for external flash memory bus interface)
97
EBIFVDD7
-
Power supply terminal (for external flash memory bus interface)
98
EBIFVSS7
-
Ground terminal (for external flash memory bus interface)
99
ASYO
O
Playback EFM duplex signal output terminal
100
ASYI
I
Playback EFM comparator slice level input terminal
101
RFI
I
Playback EFM RF signal input from the RF amplifier
102
PCO
O
Phase comparison output terminal for the playback EFM system master PLL
42
MZ-RH10
Pin No.
Pin Name
I/O
103
FILI
I
Filter input terminal for the playback EFM system master PLL
104
FILO
O
Filter output terminal for the playback EFM system master PLL
105
CLTV
I
Internal VCO control voltage input terminal for the playback EFM system master PLL
106
PEAK
I
Peak hold signal input of the light amount signal (RF/ABCD) the RF amplifier
107
BOTM
I
Bottom hold signal input of the light amount signal (RF/ABCD) the RF amplifier
108
ABCD
I
Light amount signal (ABCD) input from the RF amplifier
109
FE
I
Focus error signal input from the RF amplifier
110
VC
I
Middle point voltage input from the RF amplifier
111
ADIO
I
Monitor output terminal of A/D converter input signal Not used
112
ADRB
I
A/D converter the lower limit voltage input terminal
113
SE
I
Sled error signal input from the RF amplifier
114
TE
I
Tracking error signal input from the RF amplifier
115
AUX1
I
Auxiliary A/D input terminal
116
ADRT
I
The upper limit voltage of A/D converter input terminal
117
DCHG
-
Connecting terminal with the analog power supply of low impedance
118
Description
APC
I
Error signal input terminal for the laser automatic power control
119
ADC1EXTC
-
Connection terminal for an external capacitor
120
TEMP_MON
I
Thermistor connection terminal for temperature detection
121
VB_MON
I
Monitor input terminal of rechargeable battery power supply voltage (UNREG)
122
CHG_MON
I
Charge or discharge current monitor input from power control IC
123
VREF_MON
O
Reference voltage monitor input from the RF amplifier
124, 125
SET_KEY_1,
SET_KEY_2
I
Set key input terminal (A/D input)
126
DCIN_DET
I
Monitor input terminal of DC input voltage for battery charge
127
HIDC_MON
I
Monitor input terminal of High DC voltage
128
WK_DET
I
Detection terminal of panel key input for system wake up
129
VBUS_MON
I
Detection terminal of panel key input for camera wake up
130
BATT_MINUS
_MON
I
Monitor input terminal of USB power supply voltage (VBUS)
131
RMC_KEY
I
Monitor input terminal of rechargeable battery minus terminal voltage
132
RST_CONT
O
Reset signal output to the power control IC
133
REC_KEY/
DOWNLOAD
I
REC/T MARK key input terminal
134
RADIO_ON
I
Radio on detection input terminal Not used
135
HALF_LOCK_SW
I
Top panel open switch detection terminal
136
XRST
I
System reset signal input terminal
137
PLL2EXTCI
I
Connection terminal for an external capacitor
138
PLL2EXTCO
O
Connection terminal for an external capacitor
139
PLL3EXTCI
I
Connection terminal for an external capacitor
140
PLL3EXTCO
O
Connection terminal for an external capacitor
141
DACVREFH
I
Reference voltage input terminal
142
APCREF_DA
O
Reference voltage output to the RF amplifier
143
ADC3VREFH
I
Reference voltage input terminal
144
ADC3EXTC
-
Connection terminal for an external capacitor (for A/D converter)
145
VIN
I
RF signal input from the RF amplifier
146
VREFL
I
Reference voltage input terminal (for internal D/A converter L-CH) Not used
147
AOUTL
O
Internal D/A converter (L-CH) output terminal Not used
148
AOUTR
O
Internal D/A converter (R-CH) output terminal Not used
43
MZ-RH10
Pin No.
Pin Name
I/O
149
VREFR
I
Reference voltage input terminal (for internal D/A converter R-CH) Not used
150
DCLSOUTR
O
PWM modulator signal output to the headphone amplifier (R-CH)
151
DCLSOUTL
O
PWM modulator signal output to the headphone amplifier (L-CH)
152
RTCK
O
Not used
153
ADFG
I
ADIP duplex FM signal (21.05kHz to 23.05 kHz) input from the RF amplifier
154
TRDR
O
Tracking servo drive PWM signal output (-) to the coil driver
155
TFDR
O
Tracking servo drive PWM signal output (+) to the coil driver
156
FFDR
O
Focus servo drive PWM signal output (+) to the coil driver
157
FRDR
O
Focus servo drive PWM signal output (-) to the coil driver
158
FS4
O
176.4 kHz clock signal output to the over write head driver and power control IC
159
SFDR
O
Sled servo drive PWM signal output to the motor driver
160
SPRD
O
Spindle motor drive control signal output (U) to the motor driver
161
SPFD
O
Spindle servo drive PWM signal output to the motor driver
162
SPDV
O
Spindle motor drive control signal output (V) to the motor driver
163
SPDW
O
Spindle motor drive control signal output (W) to the motor driver
164
SPCU
I
Spindle motor drive comparison signal input (U) from the motor driver
Description
165
SPCV
I
Spindle motor drive comparison signal input (V) from the motor driver
166
SPCW
I
Spindle motor drive comparison signal input (W) from the motor driver
167
SLDV
O
Sled motor drive control signal output (V) to the motor driver
168
SLDW
O
Sled motor drive control signal output (W) to the motor driver
169
SLCU
I
Sled motor drive comparison signal input (U) from the motor driver
170
SLCV
I
Sled motor drive comparison signal input (V) from the motor driver
171
SLCW
I
Sled motor drive comparison signal input (W) from the motor driver
172
SRDR
O
Sled motor drive control signal output (U) to the motor driver
173
DIN
I
Digital audio signal input terminal
174
FS256_OUT
O
11.2896 MHz clock output to the RF amplifier
175
CHOPPERCLK
O
Clock signal output for chopper to the over write head driver
176 to 179 MNT0 to MNT3
O
Monitor output terminal for DSP Not used
180
OFTRK
I/O
181
Tracking signal input/output for MD3
RECP
O
182
EFMO
O
EFM encode data output for the recording to the over write head driver
183
PAUSE_KEY
I
Pause key input terminal
184
PROTECT
I
Recording protector for normal disc detection switch input terminal
185
OPT_DET
I
Optical digital input plug detection signal input terminal "H": optical in
186
XJACK_DET
I
Line input plug detection signal input terminal "L": plug in
187
XMIC_DET
I
Microphone input plug detection signal input terminal "L": plug in
188
OPEN_CLOSE_SW
I
Top panel open/close detection switch input terminal
189
XCS_ADC
O
Chip select signal output to the A/D converter
190
XPD_ADC
O
Power control signal output to the A/D converter
191
NC
-
Not used
192
XRST_LCD
O
Reset signal output to the switch unit
193
USB_WAKE
I
System wake up signal output terminal by USB connection
194
A7CAL_SW
I/O
195
SI0
I
Serial data input from the EEPROM
196
SO0
O
Serial data output to the A/D converter, EEPROM and power control IC
197
SCK0
O
Serial data transfer clock signal output to the A/D converter, EEPROM and power control IC
198
XGUM_ON
I
Rechargeable battery insert detection switch input terminal
44
Laser power selection signal output to the power control IC
A7 offset voltage CAL on/off control signal output terminal Not used
MZ-RH10
Pin No.
Pin Name
I/O
199
BEEP
O
Beep sound control signal output to the headphone amplifier Not used
200
XOPT_CTL
O
Power supply on/off control signal output terminal for the optical input jack
201
NC
-
Not used
202
EL_PWR_CTL
O
EL power supply on/off control signal output terminal
203
REC_LED/
ACCESS_LED
O
Recording indication LED and accessing indication LED drive signal output terminal Not used
204
MDVCC_CTL
O
Power supply control signal output terminal for the optical pick-up block
205
Description
VBUS_VB_CTL
O
USB power supply control signal output terminal
206
EL_PWR_CTL
O
EL VDD power supply on/off control signal output terminal
207
DRAM_ALONE
O
Power on/off control signal output terminal for internal D-RAM
208
XNV_WP_CTL
-
Write protect signal output to the EEPROM
209, 210
PD_S0, PD_S1
O
PD IC mode selection signal output to the optical pick-up block
211
D_ENREG
O
Internal power supply on/off control signal output to the headphone amplifier
212
XMUTE
O
Muting on/off control signal output terminal
213
SI1
I
Serial data input from the switch unit
214
SO1
O
Serial data output to the switch unit
215
SCK1
O
Serial data transfer clock signal output to the switch unit
216
SLD_MON
I
Monitor signal input terminal of sled servo
217
AOUT_SEL
O
Headphone/line output selection signal output terminal Not used
218
SLEEP
O
Chip enable signal output to the power control IC
219
FFCLR
O
Power supply on/off control signal output terminal for FCRAM (internal RAM)
220
NC
-
Not used
221, 222
CHGI_CTL2,
CHGI_CTL3
O
Charge current control signal output terminal "H": low current charge
223
NC
-
Not used
224
XTEST
I
Input terminal for the test mode setting "L": test mode
225
XRF_RST
O
Reset signal output to the RF amplifier
226
VREC_SEL
O
VREC wake up timing control signal output terminal Not used
227
XHOLD_SW
I
HOLD switch input terminal
228
T_MARK_SW
I
T MARK switch input terminal Not used
229
XRST2_DET
I
Reset signal input from the power control IC
230
CHGI_SEL
O
Charge/discharge control signal output for current detection amplifier to the charge control IC
231
RECP_MON
I
Monitor input terminal for laser power selection signal output
232
SPDL_MON
I
Monitor signal input terminal of spindle servo
233
XCS_PWR_IC
O
Chip select signal output to the power control IC
234
USB_CHARGE
O
USB charge control signal output terminal
235
AC_CHARGE
O
AC charge control signal output terminal Not used
236
XCS_LCD
O
Chip select signal output to the switch unit
237
CC_CTL/VI_CTL
O
Constant current circuit control signal output to the charge control IC
238
XRST_MTR_DRV
O
Reset signal output to the motor driver
239
XCS_NV
O
Chip select signal output to the EEPROM
240
CHG_PWM
O
Charge current or voltage control signal output to the charge control IC
241
IAMP_CAL
O
Offset signal output for current detection amplifier charge control IC Not used
242
NC
-
Not used
243
D_VCONT_PWM
O
For voltage control signal output to the headphone amplifier
244
CHG_OPR_LED
O
Charging indication LED drive signal output terminal
245
XCS_REC_DRV
O
Chip select signal output to the over write head driver
246
GND_SW
O
Ground line selection signal output terminal
45
MZ-RH10
Pin No.
Pin Name
I/O
247
CS_RTC
O
Chip select signal output to the real time clock Not used
248
JOG_A
I
Jog dial pulse input terminal (A phase)
249
JOG_B
I
Jog dial pulse input terminal (B phase)
250
VBUS_DET
I
Detection terminal of USB power supply
251
Description
SSB_DATA
I/O
252
SSB_CLK
O
SSB clock output to the RF amplifier
253
UMD_PROTECT
I
Recording protector for Hi-MD disc detection switch input terminal
254
LDPEN
O
Pulse/DC light-emit selection signal output to the optical pick-up block
255
CHG_TYPE2
O
Charge control signal output terminal "H": charging
256
DRAM_HOLD
_DET
I
Detection terminal for internal D-RAM power supply information keeping
257
DRAM_VDD_CLR
O
Internal D-RAM power supply latch clear signal output for quick mode sleep
258
AD2ENDF
I
Monitor input terminal for flag of servo signal A/D measuring finish
259
TEST
I
Input terminal for the test Not used
260
SRAM_MODE
I
Terminal for setting
261
HSALF
I
Terminal for setting
O
Trigger monitor terminal Output clock=18.5 MHz
262 to 271 MON0 to MON9
SSB data input/output with the RF amplifier
272
XLSRCK
O
Pulse output for laser strobe recording to the optical pick-up
273
TAT
I
Not used
274
TAN
I
Not used
275
NAR
I
Not used
276
IDO
I
Not used
277
SAK
O
Not used
278
LRCKI
I
L/R sampling clock signal input terminal for PCM data interface Not used
279
XBCKI
I
Bit clock signal input terminal for the PCM data interface Not used
280
DATAI
I
Serial data input terminal for the PCM data interface Not used
281
SI3
I
Serial data input for LAM microcomputer communication Not used
282
SO3
O
Serial data output for LAM microcomputer communication Not used
283
SCK3
O
Serial data transfer clock signal output for LAM microcomputer communication Not used
284
SI4
I
Serial data input for ATRAC3 plus encoder communication Not used
285
SO4
O
Serial data output for ATRAC3 plus encoder communication Not used
286
SCK4
O
Serial data transfer clock signal output for ATRAC3 plus encoder communication Not used
287, 177
289
NC
-
Not used
HI_Z_SLD
O
Standby signal output for the sled motor to the motor driver
290
HI_Z_SPDL
O
Standby signal output for the spindle motor to the motor driver
291 to 294
SET_CODE0 to
SET_CODE3
I
Input terminal for the model setting
295, 296
D_EN1, D_EN2
O
Headphone/LINE/beep selection signal output to the headphone amplifier Not used
297
D_ENVG
O
Power on/off control signal output terminal for headphone amplifier
298
DADT
O
Audio data output to the D/A converter Not used
299, 300
PWM_L1,
PWM_L2
O
LC drive PWM output terminal Not used
301, 302
I2C_1, I2C_2
I/O
Open drain for I2C
303, 304
JTAG0, JTAG1
I/O
Terminal for setting
305
CLKIN2
I
306
FS256
O
Master clock signal (256Fs=11.2896 MHz) output to A/D converter
307
ADDT
I
Data input from A/D converter
308
LRCK
O
L/R sampling clock signal (44.1kHz) output to external A/D converter
46
Clock signal input terminal (13.5 MHz or 27 MHz) Not used
MZ-RH10
Pin No.
Pin Name
I/O
309
XBCK
O
Bit clock (2.8224 MHz) output to the external A/D converter
Description
310
OSCI
I
Main system clock input terminal (22.5792 MHz)
311
OSCO
O
Main system clock output terminal (22.5792 MHz)
312
FS512
O
Clock signal (512Fs=22.5792 MHz) output to the headphone amplifier
313
DTCK
I/O
TSB master data clock input/output or SSB data input/output with the remote commander
314
UDP
I/O
USB data (+) input/output terminal
315
UDM
I/O
USB data (-) input/output terminal
316
USBHOLD
I
317
SUSPEND
O
USB suspend signal output to the power control IC
318
UPUEN
O
USB pull-up resistor connection control terminal
319
UOSCI
I
System clock input terminal (48 MHz) (for USB oscillation circuit)
320
UOSCO
O
System clock output terminal (48 MHz) (for USB oscillation circuit)
USB hold signal input from the power control IC
47
MZ-RH10
SECTION 7
EXPLODED VIEWS
NOTE:
• -XX and -X mean standardized parts, so they
may have some difference from the original
one.
• Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
↑
↑
Parts Color Cabinet's Color
7-1.
• Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering
these items.
• The mechanical parts with no reference
number in the exploded views are not supplied.
• Accessories are given in the last of the
electrical parts list.
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
CASE (LOWER) SECTION
6
panel (upper) section
7
chassis section
8
4
5
3
2
2
2
9
1
2
10
Ref. No.
Part No.
Description
1
1
1
1
2
2-588-293-01
2-588-293-11
2-588-293-21
2-588-293-41
3-234-449-25
KNOB (OPEN) (for BLACK)
KNOB (OPEN) (for SILVER)
KNOB (OPEN) (for BLUE)
KNOB (OPEN) (for ORANGE)
SCREW (M1.4) (for BLACK)
2
3
3
3
4
3-234-449-27
3-237-092-01
3-237-092-51
3-249-687-81
2-588-291-21
SCREW (M1.4) (for SILVER, BLUE, ORANGE)
KNOB (HOLD) (for SILVER)
KNOB (HOLD) (for BLACK)
KNOB (HOLD) (for BLUE, ORANGE)
ORNAMENT (CASE)
48
Remark
Ref. No.
Part No.
Description
5
6
7
8
9
2-593-171-01
2-588-274-01
3-234-449-19
X-2055-749-1
2-588-290-81
SHUTTER (JACK)
TORSION SPRING (L)
SCREW (M1.4)
SHEET EMC SV ASSY
CASE (LOWER) (BLACK)
9
9
9
10
2-588-290-91
2-629-174-01
2-629-174-11
X-2055-437-1
CASE (LOWER) (SILVER)
CASE (LOWER) (BLUE)
CASE (LOWER) (ORANGE)
BATTERY LID ASSY (M)
Remark
MZ-RH10
7-2.
PANEL (UPPER) SECTION
57
51
55
56
53
52
54
60
61
59
55
58
Ref. No.
Part No.
Description
51
51
51
51
52
X-2055-745-1
X-2055-746-1
X-2055-747-1
X-2055-748-1
2-588-282-01
PANEL (UPPER) (B) SV ASSY (BLACK)
PANEL (UPPER) (S) SV ASSY (SILVER)
PANEL (UPPER) (L) SV ASSY (BLUE)
PANEL (UPPER) (O) SV ASSY (ORANGE)
BUTTON (FF/FR) (for BLACK)
52
53
53
2-588-282-11 BUTTON (FF/FR) (for SILVER, BLUE, ORANGE)
2-588-281-01 BUTTON (CONTROL) (for BLACK)
2-588-281-11 BUTTON (CONTROL)
(for SILVER, BLUE, ORANGE)
A-1104-960-A SWITCH UNIT ASSY (for BLACK)
54
Remark
Ref. No.
Part No.
Description
Remark
54
A-1108-437-A SWITCH UNIT ASSY
(for SILVER, BLUE, ORANGE)
55
56
57
58
59
3-234-449-11
2-590-008-01
2-590-009-01
2-596-596-01
2-588-283-01
60
61
2-589-999-01 INSULATING SHEET (FPC)
2-590-003-01 INSULATING SHEET (UPPER PWB)
SCREW (M1.4)
SPACER (O/L)
SPACER (L)
SHEET, UPPER (PORON)
HOLDER LCD
49
MZ-RH10
7-3.
CHASSIS SECTION
109
mechanism deck section
(MT-MZNH900-181J)
107
108
120
121
105
not suplied
106
not suplied
110
111
112
MAIN
board
114
104
113
117
116
118
115
101
119
102
103
Ref. No.
Part No.
Description
101
102
103
104
105
2-595-769-01
3-245-889-01
3-266-499-01
3-266-506-01
3-254-003-01
SPRING (LOCK), TENSION
SPRING (LIMITTER), COMPRESSION
SLIDER, OPEN
CASE, BATTERY
SCREW
106
107
108
109
110
2-588-272-01
3-266-502-01
2-588-275-01
3-246-996-01
2-024-015-01
COVER (SUM3)
PIN, MD STANDARD
TORSION SPRING (R)
SCREW (MD), STEP
SPACER (HP)
111
2-594-513-01 SPECER (COIL)
50
Remark
Ref. No.
Part No.
Description
Remark
112
113
114
115
116
2-024-013-01
2-594-514-01
2-588-273-01
3-238-876-04
X-2025-842-1
SPACER (LINE IN)
SPACER (IC)
TERMINAL (SUM3)
SCREW (M1.4), TOOTHED LOCK
MAIN BOARD, COMPLETE (for SERVICE)
117
118
119
120
121
3-266-508-01
X-3382-584-2
3-234-449-27
X-2050-643-1
2-630-349-01
TERMINAL (-), BATTERY
TERMINAL (+) ASSY, BATTERY
SCREW (M1.4)
CHASSIS ASSY, SET
SHEET (REC FPC), ADHESIVE
MZ-RH10
7-4.
MECHANISM DECK SECTION (MT-MZNH900-181J)
159
158
161
not supplied HR601
(over write head)
157
154
M702
160
162
156
154
M703
M701
153
163
(including HR601 (over write head) )
155
153
152
153
151
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.
Ref. No.
Part No.
Description
151
152
153
154
155
3-338-645-31
3-263-454-01
3-248-370-01
3-225-996-17
3-244-880-01
WASHER (0.8-2.5)
GEAR (BSA)
SCREW, SELF TAP
SCREW (M1.4) (EG), PRECISION PAN
SPRING, THRUST RETAINER
156
157
158
159
160
3-263-455-01
3-259-972-24
X-3384-651-2
X-3384-650-3
3-263-453-01
GEAR (SB)
CHASSIS (REC)
BASE ASSY, MOTOR
HOLDER ASSY
PLATE, RATCHET
Remark
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Ref. No.
Part No.
161
162
0 163
X-2023-272-1 LEAD SCREW SERVICE ASSY
3-244-879-01 SPRING, RACK
X-2055-677-1 OP SERVICE ASSY (ABX-UJ)
(including HR601(OVER WRITE HEAD))
8-835-782-12 MOTOR, DC SSM18D/C-NP (SPINDLE)
1-787-143-11 MOTOR, DC (SLED)
M701
M702
M703
Description
Remark
1-477-519-21 MOTOR UNIT, DC
(OVER WRITE HEAD UP/DOWN)
51
MZ-RH10
SECTION 8
ELECTRICAL PARTS LIST
MAIN
NOTE:
•
• Due to standardization, replacements in the
parts list may be different from the parts
specified in the diagrams or the components
used on the set.
•
• -XX and -X mean standardized parts, so they
may have some difference from the original
one.
• RESISTORS
All resistors are in ohms.
•
METAL: Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
•
F: nonflammable
• Abbreviation
AUS : Australian model
HK : Hong Kong model
CND : Canadian model
JE : Tourist model
EE : East European model KR : Korean model
Ref. No.
Part No.
Items marked “*” are not stocked since they
are seldom required for routine service.
Some delay should be anticipated when
ordering these items.
SEMICONDUCTORS
In each case, u: µ, for example:
uA... : µA...
uPA... : µPA...
uPB... : µPB...
uPC... : µPC...
uPD... : µPD...
CAPACITORS
uF: µF
COILS
uH: µH
Description
Remark
X-2055-842-1 MAIN BOARD, COMPLETE (for SERVICE)
*********************
2-024-013-01
2-024-015-01
2-594-513-01
2-594-514-01
SPACER (LINE IN)
SPACER (HP)
SPECER (COIL)
SPACER (IC)
< CAPACITOR >
C101
C102
C104
C105
C106
1-164-874-11
1-125-837-11
1-164-939-11
1-125-777-11
1-164-937-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
1uF
0.0022uF
0.1uF
0.001uF
5%
10%
10%
10%
10%
50V
6.3V
50V
10V
50V
C107
C108
C153
C154
C155
1-131-862-11
1-135-210-11
1-125-777-11
1-135-868-11
1-127-715-11
TANTALUM CHIP
TANTALUM CHIP
CERAMIC CHIP
TANTALUM CHIP
CERAMIC CHIP
47uF
4.7uF
0.1uF
220uF
0.22uF
20%
20%
10%
20%
10%
4V
10V
10V
2.5V
16V
C201
C202
C204
C205
C206
1-164-874-11
1-125-837-11
1-164-939-11
1-125-777-11
1-164-937-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
1uF
0.0022uF
0.1uF
0.001uF
5%
10%
10%
10%
10%
50V
6.3V
50V
10V
50V
C207
C208
C253
C254
C255
1-131-862-11
1-135-210-11
1-125-777-11
1-135-868-11
1-127-715-11
TANTALUM CHIP
TANTALUM CHIP
CERAMIC CHIP
TANTALUM CHIP
CERAMIC CHIP
47uF
4.7uF
0.1uF
220uF
0.22uF
20%
20%
10%
20%
10%
4V
10V
10V
2.5V
16V
C303
C310
C311
C312
C313
1-125-777-11
1-135-259-11
1-125-777-11
1-100-539-11
1-100-539-11
CERAMIC CHIP
TANTALUM CHIP
CERAMIC CHIP
TANTALUM CHIP
TANTALUM CHIP
0.1uF
10uF
0.1uF
47uF
47uF
10%
20%
10%
20%
20%
10V
6.3V
10V
6.3V
6.3V
C314
C315
C316
C318
C319
1-125-777-11
1-165-851-11
1-119-750-11
1-135-149-21
1-125-777-11
CERAMIC CHIP
TANTALUM CHIP
TANTALUM CHIP
TANTALUM CHIP
CERAMIC CHIP
0.1uF
10uF
22uF
2.2uF
0.1uF
10%
20%
20%
10%
10%
10V
6.3V
6.3V
10V
10V
C320
C321
C322
C323
C324
1-135-149-21
1-100-539-11
1-125-777-11
1-135-259-11
1-125-777-11
TANTALUM CHIP
TANTALUM CHIP
CERAMIC CHIP
TANTALUM CHIP
CERAMIC CHIP
2.2uF
47uF
0.1uF
10uF
0.1uF
10%
20%
10%
20%
10%
10V
6.3V
10V
6.3V
10V
52
Ref. No.
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
When indicating parts by reference
number, please include the board.
Part No.
Description
Remark
C325
C327
C328
C351
C352
1-125-777-11
1-125-837-11
1-125-837-11
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
1uF
1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
10V
6.3V
6.3V
10V
10V
C354
C355
C356
C360
C361
1-125-837-11
1-128-964-11
1-128-964-11
1-125-777-11
1-119-750-11
CERAMIC CHIP
TANTALUM CHIP
TANTALUM CHIP
CERAMIC CHIP
TANTALUM CHIP
1uF
100uF
100uF
0.1uF
22uF
10%
20%
20%
10%
20%
6.3V
6.3V
6.3V
10V
6.3V
C362
C364
C365
C367
C370
1-135-259-11
1-125-777-11
1-125-837-11
1-125-837-11
1-100-352-11
TANTALUM CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
0.1uF
1uF
1uF
1uF
20%
10%
10%
10%
20%
6.3V
10V
6.3V
6.3V
16V
C371
C381
C402
C403
C406
1-125-777-11
1-125-777-11
1-100-609-11
1-100-609-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
TANTALUM CHIP
CERAMIC CHIP
0.1uF
0.1uF
220uF
220uF
0.1uF
10%
10%
10%
10V
10V
5V
5V
10V
C407
C408
C409
C411
C412
1-125-777-11
1-125-777-11
1-164-943-11
1-119-751-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.01uF
22uF
0.1uF
10%
10%
10%
20%
10%
10V
10V
16V
16V
10V
C415
C417
C419
C420
C421
1-125-777-11
1-125-777-11
1-125-777-11
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
10V
10V
10V
10V
10V
C424
C426
C452
C453
C479
1-128-964-11
1-119-751-11
1-107-826-11
1-165-176-11
1-125-777-11
TANTALUM CHIP
TANTALUM CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100uF
22uF
0.1uF
0.047uF
0.1uF
20%
20%
10%
10%
10%
6.3V
16V
16V
16V
10V
C480
C481
C491
C492
C493
1-125-837-11
1-125-837-11
1-104-915-11
1-164-850-11
1-125-837-11
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
1uF
2.2uF
10PF
1uF
10%
10%
20%
0.5PF
10%
6.3V
6.3V
20V
50V
6.3V
C511
C513
C515
C516
1-125-777-11
1-164-943-11
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.01uF
0.1uF
0.1uF
10%
10%
10%
10%
10V
16V
10V
10V
MZ-RH10
MAIN
Ref. No.
Part No.
Description
Remark
C517
1-125-777-11 CERAMIC CHIP
0.1uF
10%
10V
C518
C519
C520
C521
C522
1-135-210-11
1-125-777-11
1-125-777-11
1-164-850-11
1-164-850-11
TANTALUM CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
4.7uF
0.1uF
0.1uF
10PF
10PF
20%
10%
10%
0.5PF
0.5PF
10V
10V
10V
50V
50V
C523
C524
C525
C526
C527
1-125-777-11
1-162-970-11
1-164-941-11
1-164-874-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.01uF
0.0047uF
100PF
0.1uF
10%
10%
10%
5%
10%
10V
25V
16V
50V
10V
C528
C529
C530
C531
C533
1-125-777-11
1-125-777-11
1-125-837-11
1-164-943-11
1-164-943-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
1uF
0.01uF
0.01uF
10%
10%
10%
10%
10%
10V
10V
6.3V
16V
16V
C536
C537
C538
C539
C545
1-107-819-11
1-125-837-11
1-164-941-11
1-125-837-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.022uF
1uF
0.0047uF
1uF
0.1uF
10%
10%
10%
10%
10%
16V
6.3V
16V
6.3V
10V
C547
C550
C552
C553
C554
1-119-923-11
1-119-923-11
1-164-943-11
1-135-210-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
CERAMIC CHIP
0.047uF
0.047uF
0.01uF
4.7uF
0.1uF
10%
10%
10%
20%
10%
10V
10V
16V
10V
10V
C555
C556
C557
C558
C559
1-164-941-11
1-135-210-11
1-125-777-11
1-164-937-11
1-164-941-11
CERAMIC CHIP
TANTALUM CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.0047uF
4.7uF
0.1uF
0.001uF
0.0047uF
10%
20%
10%
10%
10%
16V
10V
10V
50V
16V
C560
C564
C565
C566
C567
1-125-777-11
1-135-210-11
1-125-777-11
1-125-777-11
1-135-210-11
CERAMIC CHIP
TANTALUM CHIP
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
0.1uF
4.7uF
0.1uF
0.1uF
4.7uF
10%
20%
10%
10%
20%
10V
10V
10V
10V
10V
C570
C573
C601
C602
C604
1-112-014-11
1-164-933-11
1-125-837-11
1-125-777-11
1-125-777-11
TANTALUM CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
4.7uF
220PF
1uF
0.1uF
0.1uF
20%
10%
10%
10%
10%
6.3V
50V
6.3V
10V
10V
C607
C609
C611
C612
C613
1-125-837-11
1-125-837-11
1-164-943-11
1-119-750-11
1-119-750-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
TANTALUM CHIP
1uF
1uF
0.01uF
22uF
22uF
10%
10%
10%
20%
20%
6.3V
6.3V
16V
6.3V
6.3V
C614
C616
C619
C620
C621
1-119-750-11
1-165-897-11
1-125-837-11
1-119-923-11
1-117-919-11
TANTALUM CHIP
TANTALUM CHIP
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
22uF
22uF
1uF
0.047uF
10uF
20%
20%
10%
10%
20%
6.3V
10V
6.3V
10V
6.3V
C622
C623
C625
C627
C628
1-100-539-11
1-164-933-11
1-125-777-11
1-100-539-11
1-125-837-11
TANTALUM CHIP
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
CERAMIC CHIP
47uF
220PF
0.1uF
47uF
1uF
20%
10%
10%
20%
10%
6.3V
50V
10V
6.3V
6.3V
C630
1-125-777-11 CERAMIC CHIP
0.1uF
10%
10V
Ref. No.
Part No.
Description
C633
C634
C635
C636
1-164-943-11
1-125-837-11
1-100-539-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
CERAMIC CHIP
0.01uF
1uF
47uF
0.1uF
10%
10%
20%
10%
16V
6.3V
6.3V
10V
Remark
C637
C638
C641
C642
C643
1-100-442-11
1-164-943-11
1-164-943-11
1-119-923-11
1-100-743-91
TANTALUM CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
0.01uF
0.01uF
0.047uF
2.2uF
20%
10%
10%
10%
20%
6.3V
16V
16V
10V
16V
C644
C645
C646
C648
C650
1-164-941-11
1-164-943-11
1-119-923-11
1-119-923-11
1-100-442-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
0.0047uF
0.01uF
0.047uF
0.047uF
10uF
10%
10%
10%
10%
20%
16V
16V
10V
10V
6.3V
C652
C653
C658
C662
C666
1-135-259-11
1-135-259-11
1-100-539-11
1-165-851-11
1-127-820-11
TANTALUM CHIP
TANTALUM CHIP
TANTALUM CHIP
TANTALUM CHIP
CERAMIC CHIP
10uF
10uF
47uF
10uF
4.7uF
20%
20%
20%
20%
10%
6.3V
6.3V
6.3V
6.3V
16V
C668
C669
C671
C672
C673
1-125-837-11
1-125-837-11
1-125-777-11
1-127-820-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
1uF
0.1uF
4.7uF
0.1uF
10%
10%
10%
10%
10%
6.3V
6.3V
10V
16V
10V
C675
C677
C701
C702
C703
1-164-943-11
1-125-777-11
1-119-923-11
1-119-923-11
1-119-923-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.1uF
0.047uF
0.047uF
0.047uF
10%
10%
10%
10%
10%
16V
10V
10V
10V
10V
C705
C706
C707
C708
C709
1-164-943-11
1-107-819-11
1-164-943-11
1-107-819-11
1-164-943-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.022uF
0.01uF
0.022uF
0.01uF
10%
10%
10%
10%
10%
16V
16V
16V
16V
16V
C710
C712
C713
C714
C715
1-107-819-11
1-125-777-11
1-125-777-11
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.022uF
0.1uF
0.1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
16V
10V
10V
10V
10V
C716
C717
C801
C802
C803
1-125-777-11
1-125-777-11
1-164-846-11
1-164-846-11
1-164-943-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
6PF
6PF
0.01uF
10%
10%
0.5PF
0.5PF
10%
10V
10V
50V
50V
16V
C804
C805
C808
C809
C810
1-164-943-11
1-125-891-11
1-125-837-11
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.47uF
1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
16V
10V
6.3V
10V
10V
C811
C812
C813
C814
C816
1-125-777-11
1-125-837-11
1-119-923-11
1-125-777-11
1-100-539-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
0.1uF
1uF
0.047uF
0.1uF
47uF
10%
10%
10%
10%
20%
10V
6.3V
10V
10V
6.3V
C817
C818
C819
C820
1-125-777-11
1-165-851-11
1-100-539-11
1-125-777-11
CERAMIC CHIP
TANTALUM CHIP
TANTALUM CHIP
CERAMIC CHIP
0.1uF
10uF
47uF
0.1uF
10%
20%
20%
10%
10V
6.3V
6.3V
10V
53
MZ-RH10
MAIN
Ref. No.
Part No.
Description
Remark
C821
1-164-874-11 CERAMIC CHIP
100PF
5%
50V
C822
C823
C827
C828
C830
1-125-777-11
1-125-777-11
1-125-777-11
1-164-937-11
1-164-937-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.001uF
0.001uF
10%
10%
10%
10%
10%
10V
10V
10V
50V
50V
C835
C836
C838
C839
C843
1-125-777-11
1-165-851-11
1-165-851-11
1-125-777-11
1-125-777-11
CERAMIC CHIP
TANTALUM CHIP
TANTALUM CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
10uF
10uF
0.1uF
0.1uF
10%
20%
20%
10%
10%
10V
6.3V
6.3V
10V
10V
C845
C846
C847
C850
C853
1-100-539-11
1-125-777-11
1-125-777-11
1-125-777-11
1-125-777-11
TANTALUM CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47uF
0.1uF
0.1uF
0.1uF
0.1uF
20%
10%
10%
10%
10%
6.3V
10V
10V
10V
10V
C856
C857
C861
C883
C884
1-125-777-11
1-164-858-11
1-125-777-11
1-135-259-11
1-135-259-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
TANTALUM CHIP
0.1uF
22PF
0.1uF
10uF
10uF
10%
5%
10%
20%
20%
10V
50V
10V
6.3V
6.3V
C885
C886
C887
C888
C891
1-125-837-11
1-164-943-11
1-125-837-11
1-164-943-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.01uF
1uF
0.01uF
0.1uF
10%
10%
10%
10%
10%
6.3V
16V
6.3V
16V
10V
C892
C895
C901
C902
C903
1-125-777-11
1-125-777-11
1-125-777-11
1-125-777-11
1-164-943-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.1uF
0.01uF
10%
10%
10%
10%
10%
10V
10V
10V
10V
16V
C906
C908
C909
C915
C916
1-100-352-11
1-164-943-11
1-119-751-11
1-100-442-11
1-100-442-11
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
TANTALUM CHIP
TANTALUM CHIP
1uF
0.01uF
22uF
10uF
10uF
20%
10%
20%
20%
20%
16V
16V
16V
6.3V
6.3V
C918
C919
C920
C922
C923
1-165-176-11
1-164-227-11
1-125-777-11
1-128-964-11
1-100-539-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
TANTALUM CHIP
0.047uF
0.022uF
0.1uF
100uF
47uF
10%
10%
10%
20%
20%
16V
25V
10V
6.3V
6.3V
C924
C931
C932
C933
C935
1-100-539-11
1-165-884-11
1-164-943-11
1-165-884-11
1-165-884-11
TANTALUM CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47uF
2.2uF
0.01uF
2.2uF
2.2uF
20%
10%
10%
10%
10%
6.3V
6.3V
16V
6.3V
6.3V
C936
C937
C939
C940
C945
1-165-884-11
1-165-884-11
1-119-750-11
1-119-750-11
1-164-939-11
CERAMIC CHIP
CERAMIC CHIP
TANTALUM CHIP
TANTALUM CHIP
CERAMIC CHIP
2.2uF
2.2uF
22uF
22uF
0.0022uF
10%
10%
20%
20%
10%
6.3V
6.3V
6.3V
6.3V
50V
C946
C948
C954
C958
C959
1-164-941-11
1-119-750-11
1-164-937-11
1-125-837-11
1-125-777-11
CERAMIC CHIP
TANTALUM CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.0047uF
22uF
0.001uF
1uF
0.1uF
10%
20%
10%
10%
10%
16V
6.3V
50V
6.3V
10V
C961
1-125-777-11 CERAMIC CHIP
0.1uF
10%
10V
Ref. No.
Part No.
Description
C3301
C3302
C3304
C3305
1-164-931-11
1-164-939-11
1-164-943-11
1-164-943-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
0.0022uF
0.01uF
0.01uF
10%
10%
10%
10%
50V
50V
16V
16V
Remark
C3306
C3308
C3309
C3331
C3332
1-164-941-11
1-164-937-11
1-164-937-11
1-164-931-11
1-164-931-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.0047uF
0.001uF
0.001uF
100PF
100PF
10%
10%
10%
10%
10%
16V
50V
50V
50V
50V
C3372
C3374
C4416
C4418
C4425
1-164-937-11
1-164-937-11
1-164-937-11
1-164-937-11
1-164-937-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.001uF
0.001uF
0.001uF
0.001uF
10%
10%
10%
10%
10%
50V
50V
50V
50V
50V
C4427
C4428
C4429
C4438
C4455
1-164-933-11
1-164-937-11
1-164-937-11
1-164-937-11
1-164-937-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
220PF
0.001uF
0.001uF
0.001uF
0.001uF
10%
10%
10%
10%
10%
50V
50V
50V
50V
50V
C4456
C4458
C4459
C4462
C4463
1-164-937-11
1-164-937-11
1-164-937-11
1-164-874-11
1-164-874-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.001uF
0.001uF
100PF
100PF
10%
10%
10%
5%
5%
50V
50V
50V
50V
50V
C4464
C4465
C4466
C4467
C4485
1-125-777-11
1-164-937-11
1-164-937-11
1-164-937-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.001uF
0.001uF
0.001uF
0.1uF
10%
10%
10%
10%
10%
10V
50V
50V
50V
10V
C6649
C6674
C6676
C6679
C6680
1-125-777-11
1-112-010-11
1-164-937-11
1-164-866-11
1-164-937-11
CERAMIC CHIP
CAP-CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
33PF
0.001uF
47PF
0.001uF
10%
5%
10%
5%
10%
10V
100V
50V
50V
50V
C8858
C8859
C8864
C8893
C9001
1-164-937-11
1-164-937-11
1-164-935-11
1-164-937-11
1-162-970-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.001uF
470PF
0.001uF
0.01uF
10%
10%
10%
10%
10%
50V
50V
50V
50V
25V
C9957
1-164-933-11 CERAMIC CHIP
220PF
10%
50V
< CONNECTOR >
54
CN451
CN471
CN501
CN701
1-818-190-21
1-819-098-21
1-818-547-21
1-818-540-21
CONNECTOR, SQUARE TYPE (USB) 7P
CONNECTOR, FFC/FPC (ZIF) 18P
CONNECTOR, FFC/FPC (ZIF) 26P
CONNECTOR, FFC/FPC (ZIF) 10P
< DIODE/VARISTOR >
D401
D438
D440
D443
D444
6-501-199-01
6-500-483-01
6-500-483-01
6-500-912-01
6-500-912-01
DIODE
DIODE
DIODE
DIODE
DIODE
NSR0320MW2T1G
MA22D2800LS0
MA22D2800LS0
MA2SD3100LS0
MA2SD3100LS0
D450
D457
D458
D471
D491
6-501-199-01
6-500-483-01
8-719-422-49
8-719-072-27
6-501-200-01
DIODE
DIODE
DIODE
DIODE
DIODE
NSR0320MW2T1G
MA22D2800LS0
MA8056-L
MA2Z748001S0
HRC0201ATRF-E
MZ-RH10
MAIN
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
< IC >
D601
D602
D604
D605
D606
6-500-813-01
8-719-072-27
6-500-483-01
6-501-201-01
6-500-909-01
DIODE
DIODE
DIODE
DIODE
DIODE
MA2SD32008S0
MA2Z748001S0
MA22D2800LS0
BAT54XV2T1
MA22D1700LS0
D607
D608
D613
D614
D801
6-500-909-01
6-501-201-01
6-500-813-01
6-500-813-01
6-501-200-01
DIODE
DIODE
DIODE
DIODE
DIODE
MA22D1700LS0
BAT54XV2T1
MA2SD32008S0
MA2SD32008S0
HRC0201ATRF-E
D803
D881
D882
D883
D884
6-500-813-01
6-500-813-01
6-500-813-01
6-500-813-01
8-719-072-27
DIODE
DIODE
DIODE
DIODE
DIODE
MA2SD32008S0
MA2SD32008S0
MA2SD32008S0
MA2SD32008S0
MA2Z748001S0
D885
D904
D905
D906
D3305
8-719-072-27
6-501-200-01
6-501-200-01
6-501-199-01
8-719-083-91
DIODE
DIODE
DIODE
DIODE
DIODE
MA2Z748001S0
HRC0201ATRF-E
HRC0201ATRF-E
NSR0320MW2T1G
EDZ TE61 6.8B
D3352
D4435
D4436
D4441
D4442
8-719-081-71
8-719-978-33
8-719-083-91
8-719-978-33
1-805-697-21
DIODE DF8A6.8FK (TE85R)
DIODE DTZ-TT11-6.8B
DIODE EDZ TE61 6.8B
DIODE DTZ-TT11-6.8B
VARISTOR (SMD)
D4443
D4456
D6615
D6616
8-719-083-91
8-719-083-91
6-500-909-01
6-500-909-01
DIODE
DIODE
DIODE
DIODE
EDZ TE61 6.8B
EDZ TE61 6.8B
MA22D1700LS0
MA22D1700LS0
IC301
IC302
IC351
@ IC401
IC471
(Not supplied)
6-706-528-01
6-706-746-01
6-707-717-01
6-705-715-01
IC
IC
IC
IC
IC
AK5356VN-L
XC6219B212MR
NJU8716AV (TE2)
MM1690NCBE
XC6219B242MR
IC491
@ IC501
@ IC601
IC602
IC604
6-707-762-01
6-705-012-11
6-705-000-01
6-703-317-01
6-706-079-01
IC
IC
IC
IC
IC
XC9103D092MR
SN761059AZQLR
SC901585VAR2
R1160N121B-TR-FA
R1180Q121C-TR-FA
IC605
IC606
IC607
IC701
@ IC801
6-706-214-01
6-702-590-01
8-759-690-72
6-705-001-01
8-753-239-65
IC
IC
IC
IC
IC
TC7SL32FU (TE85R)
XC61CN1702NR
XC61CN0902NR
SC901583EPR2
CXD2681-225GG
IC804
IC881
IC882
IC891
IC901
6-704-732-01
6-708-012-01
6-706-094-01
6-702-168-01
6-704-997-01
IC
IC
IC
IC
IC
PST3325UL
MM3005BNLE
R1180Q221B-TR-FA
AK6512CM-E2
SC901584EPR2
IC903
6-704-245-01 IC XC61CC1702NR
< JACK >
J301
J302
J351
J402
1-815-950-12
1-794-084-12
1-816-153-21
1-785-383-11
JACK (LINE IN (OPT))
JACK (MIC (PLUG IN POWER))
JACK (i)
JACK, DC (POLARITY UNIFIED TYPE)(DC IN 3V)
< COIL/RESISTOR >
< FUSE >
0 F351
1-576-439-41 FUSE (0.25A/125V)
< JUMPER RESISTOR/FERRITE BEAD >
FB802
FB807
FB808
FB1101
FB1102
1-218-990-11
1-218-990-11
1-218-990-11
1-500-283-11
1-400-591-22
SHORT CHIP
0
SHORT CHIP
0
SHORT CHIP
0
INDUCTOR, FERRITE BEAD
BEAD, FERRITE (CHIP) (1608)
FB1151
FB2201
FB2202
FB2251
FB3301
1-400-180-21
1-500-283-11
1-400-591-22
1-400-180-21
1-500-283-11
INDUCTOR, EMI FERRITE (1608)
INDUCTOR, FERRITE BEAD
BEAD, FERRITE (CHIP) (1608)
INDUCTOR, EMI FERRITE (1608)
INDUCTOR, FERRITE BEAD
FB3302
FB3351
FB3353
FB3355
FB3357
1-400-591-22
1-400-180-21
1-469-179-21
1-469-179-21
1-469-179-21
BEAD, FERRITE (CHIP) (1608)
INDUCTOR, EMI FERRITE (1608)
INDUCTOR, FERRITE BEAD
INDUCTOR, FERRITE BEAD
INDUCTOR, FERRITE BEAD
FB4451
FB4452
FB5501
FB5503
FB8803
1-469-869-21
1-469-869-21
1-218-990-11
1-216-864-11
1-216-864-11
INDUCTOR (EMI FERRITE) (2012)
INDUCTOR (EMI FERRITE) (2012)
SHORT CHIP
0
SHORT CHIP
0
SHORT CHIP
0
FB8810 1-218-990-11 SHORT CHIP
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.
L152
L252
L303
L491
L502
1-400-582-21
1-400-582-21
1-400-397-11
1-469-952-21
1-400-397-11
INDUCTOR
INDUCTOR
INDUCTOR
COIL, CHOKE
INDUCTOR
47uH
47uH
10uH
22uH
10uH
L503
L504
L505
L506
L507
1-400-397-11
1-400-397-11
1-400-397-11
1-400-397-11
1-400-397-11
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
10uH
10uH
10uH
10uH
10uH
L601
L603
L605
L606
L607
1-414-398-11
1-414-398-11
1-456-697-21
1-400-626-11
1-456-697-21
INDUCTOR
INDUCTOR
COIL, CHOKE
COIL, CHOKE
COIL, CHOKE
10uH
10uH
22uH
10uH
22uH
L608
L801
L802
L803
L804
1-400-402-21
1-400-397-11
1-400-343-21
1-216-001-00
1-216-001-00
INDUCTOR
INDUCTOR
INDUCTOR
RES-CHIP
RES-CHIP
4.7uH
10uH
22uH
10
10
L806
L881
L901
L903
L904
1-400-342-21
1-414-404-41
1-456-710-21
1-400-397-11
1-400-397-11
INDUCTOR
COIL, CHOKE
COIL, CHOKE
INDUCTOR
INDUCTOR
10uH
100uH
100uH
10uH
10uH
L906
L907
1-456-677-21 COIL, CHOKE
1-456-677-21 COIL, CHOKE
5%
5%
1/10W
1/10W
0
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
47uH
47uH
@ Replacement of IC401, IC501, IC601 and IC801 used in
this set requires a special tool.
55
MZ-RH10
MAIN
Ref. No.
Part No.
Description
Remark
< FILTER/COIL >
LF401 1-411-957-11 FILTER, COMMON MODE
LF4451 1-456-111-11 COIL, COMMON MODE CHOKE
< TRANSISTOR >
Q151
Q251
Q301
Q351
Q352
6-550-379-01
6-550-379-01
8-729-051-23
6-550-859-01
6-551-127-01
FET
FET
TRANSISTOR
FET
TRANSISTOR
2SK354700LS0
2SK354700LS0
2SA2018TL
NTHD4508NT1G
RT1P441U-TP-1
Q353
Q401
Q402
Q403
Q406
6-551-154-01
6-551-329-01
6-551-334-01
6-551-334-01
6-551-321-01
TRANSISTOR
TRANSISTOR
FET
FET
TRANSISTOR
RT2C00M-TP
TPCP8601 (TE85L, F)
RTL035N03TR
RTL035N03TR
RT3WLMM-TP-1F
Q407
Q432
Q433
Q441
Q442
6-551-327-01
6-551-328-01
6-551-325-01
8-729-030-46
6-551-334-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
FET
RT1N144U-TP-1
TPCP8501 (TE85L, F)
2SC5383-TP-1F
XP4314-TX
RTL035N03TR
Q451
Q452
Q471
Q491
Q492
6-550-354-01
6-551-321-01
6-551-154-01
6-551-273-01
6-551-334-01
FET
TRANSISTOR
TRANSISTOR
FET
FET
RTQ035P02TR
RT3WLMM-TP-1F
RT2C00M-TP
RTR025N03TL
RTL035N03TR
Q493
Q502
Q503
Q504
Q601
8-729-030-46
8-729-051-23
6-551-325-01
8-729-037-89
6-550-357-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
FET
XP4314-TX
2SA2018TL
2SC5383-TP-1F
2SC4627J-C (TX).SO
CPH5614-TL-E
Q602
Q603
Q608
Q609
Q611
6-550-740-01
6-550-859-01
8-729-030-46
6-550-859-01
6-551-334-01
FET
FET
TRANSISTOR
FET
FET
MCH6617-TL-E
NTHD4508NT1G
XP4314-TX
NTHD4508NT1G
RTL035N03TR
Q612
Q616
Q617
Q618
Q801
6-551-273-01
6-551-334-01
6-551-321-01
6-551-321-01
8-729-047-68
FET
FET
TRANSISTOR
TRANSISTOR
FET
RTR025N03TL
RTL035N03TR
RT3WLMM-TP-1F
RT3WLMM-TP-1F
SSM3K03FE (TPL3)
Q802
Q803
Q881
Q883
Q884
8-729-051-50
6-551-325-01
6-551-321-01
6-551-327-01
8-729-048-77
FET
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
XP152A12C0MR
2SC5383-TP-1F
RT3WLMM-TP-1F
RT1N144U-TP-1
XP4313- (TX).SO
Q885
Q886
Q901
Q904
Q905
6-551-334-01
8-729-030-46
6-550-818-01
6-551-334-01
8-729-030-46
FET
TRANSISTOR
FET
FET
TRANSISTOR
RTL035N03TR
XP4314-TX
US6K1TR
RTL035N03TR
XP4314-TX
Q906
6-551-321-01 TRANSISTOR
56
1-208-927-11 METAL CHIP
1-208-715-11 METAL CHIP
1-208-911-11 METAL CHIP
Part No.
Description
Remark
R107
R151
1-208-715-11 METAL CHIP
1-218-961-11 RES-CHIP
22K
4.7K
0.5%
5%
1/16W
1/16W
R155
R156
R201
R203
R206
1-218-929-11
1-218-937-11
1-208-927-11
1-208-715-11
1-208-911-11
RES-CHIP
RES-CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10
47
47K
22K
10K
5%
5%
0.5%
0.5%
0.5%
1/16W
1/16W
1/16W
1/16W
1/16W
R207
R251
R255
R256
R301
1-208-715-11
1-218-961-11
1-218-929-11
1-218-937-11
1-218-953-11
METAL CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
22K
4.7K
10
47
1K
0.5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R302
R303
R304
R305
R306
1-400-807-21
1-400-807-21
1-218-977-11
1-218-941-11
1-218-965-11
BEAD, FERRITE (1005)
BEAD, FERRITE (1005)
RES-CHIP
100K
RES-CHIP
100
RES-CHIP
10K
5%
5%
5%
1/16W
1/16W
1/16W
R307
R309
R310
R312
R314
1-218-941-11
1-218-953-11
1-218-953-11
1-218-929-11
1-218-990-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
100
1K
1K
10
0
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R351
R352
R353
R354
R355
1-218-989-11
1-218-973-11
1-208-715-11
1-218-990-11
1-218-989-11
RES-CHIP
RES-CHIP
METAL CHIP
SHORT CHIP
RES-CHIP
1M
47K
22K
0
1M
5%
5%
0.5%
1/16W
1/16W
1/16W
5%
1/16W
R356
R357
R358
R359
R360
1-218-957-11
1-218-973-11
1-218-990-11
1-218-985-11
1-218-977-11
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
2.2K
47K
0
470K
100K
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/16W
R361
R362
R364
R365
R366
1-218-933-11
1-218-985-11
1-216-864-11
1-218-990-11
1-218-990-11
RES-CHIP
RES-CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
22
470K
0
0
0
5%
5%
1/16W
1/16W
R401
R413
R414
R415
R417
1-218-990-11
1-218-977-11
1-218-965-11
1-218-961-11
1-218-989-11
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
0
100K
10K
4.7K
1M
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R418
R419
R420
R421
R422
1-218-977-11
1-218-965-11
1-218-961-11
1-218-977-11
1-218-989-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100K
10K
4.7K
100K
1M
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R423
R424
R425
R426
R432
1-218-981-11
1-218-985-11
1-218-957-11
1-218-990-11
1-245-456-21
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
METAL CHIP
220K
470K
2.2K
0
1
5%
5%
5%
1/16W
1/16W
1/16W
1%
1/5W
R433
R434
R436
R437
R438
1-245-455-21
1-218-989-11
1-218-981-11
1-218-981-11
1-218-977-11
METAL CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
0.47
1M
220K
220K
100K
1%
5%
5%
5%
5%
1/5W
1/16W
1/16W
1/16W
1/16W
RT3WLMM-TP-1F
< RESISTOR/FERRITE BEAD >
R101
R103
R106
Ref. No.
47K
22K
10K
0.5%
0.5%
0.5%
1/16W
1/16W
1/16W
MZ-RH10
MAIN
Ref. No.
Part No.
Description
R441
R442
R443
R455
R456
1-218-990-11
1-218-977-11
1-218-977-11
1-218-989-11
1-218-985-11
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
0
100K
100K
1M
470K
Remark
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R462
R463
R464
R466
R467
1-218-981-11
1-218-945-11
1-208-935-11
1-220-804-11
1-218-965-11
RES-CHIP
RES-CHIP
METAL CHIP
RES-CHIP
RES-CHIP
220K
220
100K
2.2M
10K
5%
5%
0.5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R472
R473
R476
R477
R478
1-218-937-11
1-218-990-11
1-208-699-11
1-208-699-11
1-218-961-11
RES-CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
RES-CHIP
47
0
4.7K
4.7K
4.7K
5%
1/16W
0.5%
0.5%
5%
1/16W
1/16W
1/16W
R480
R481
R482
R484
R486
1-218-977-11
1-218-990-11
1-218-977-11
1-218-981-11
1-218-990-11
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
100K
0
100K
220K
0
5%
1/16W
5%
5%
1/16W
1/16W
R488
R489
R490
R491
R492
1-218-981-11
1-218-941-11
1-218-941-11
1-218-941-11
1-218-985-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
220K
100
100
100
470K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R493
R494
R495
R496
R497
1-208-715-11
1-208-715-11
1-208-935-11
1-218-989-11
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
RES-CHIP
RES-CHIP
22K
22K
100K
1M
100K
0.5%
0.5%
0.5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R499
R501
R502
R505
R513
1-218-981-11
1-218-957-11
1-218-953-11
1-218-929-11
1-218-965-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
220K
2.2K
1K
10
10K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R514
R515
R516
R517
R518
1-218-973-11
1-218-965-11
1-218-973-11
1-218-965-11
1-218-973-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
47K
10K
47K
10K
47K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R519
R520
R524
R525
R526
1-218-953-11
1-218-949-11
1-218-945-11
1-216-864-11
1-216-864-11
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
SHORT CHIP
1K
470
220
0
0
5%
5%
5%
1/16W
1/16W
1/16W
R605
R608
R612
R616
R617
1-218-953-11
1-218-446-11
1-220-804-11
1-218-953-11
1-218-953-11
RES-CHIP
METAL CHIP
RES-CHIP
RES-CHIP
RES-CHIP
1K
1
2.2M
1K
1K
5%
5%
5%
5%
5%
1/16W
1/10W
1/16W
1/16W
1/16W
R618
R619
R624
R625
R628
1-218-977-11
1-218-977-11
1-218-985-11
1-218-985-11
1-218-933-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100K
100K
470K
470K
22
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R629
R645
R646
1-220-804-11 RES-CHIP
1-218-985-11 RES-CHIP
1-218-973-11 RES-CHIP
2.2M
470K
47K
5%
5%
5%
1/16W
1/16W
1/16W
Ref. No.
Part No.
Description
Remark
R647
R648
1-218-989-11 RES-CHIP
1-245-456-21 METAL CHIP
1M
1
5%
1%
1/16W
1/5W
R649
R651
R653
R654
R659
1-245-456-21
1-245-456-21
1-218-969-11
1-218-989-11
1-218-977-11
METAL CHIP
METAL CHIP
RES-CHIP
RES-CHIP
RES-CHIP
1
1
22K
1M
100K
1%
1%
5%
5%
5%
1/5W
1/5W
1/16W
1/16W
1/16W
R660
R661
R662
R663
R664
1-218-985-11
1-218-985-11
1-218-985-11
1-218-981-11
1-216-789-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
470K
470K
470K
220K
2.2
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/10W
R675
R678
R679
R681
R682
1-220-804-11
1-218-990-11
1-218-945-11
1-218-989-11
1-218-989-11
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
2.2M
0
220
1M
1M
5%
1/16W
5%
5%
5%
1/16W
1/16W
1/16W
R683
R684
R685
R686
R687
1-218-989-11
1-218-965-11
1-218-965-11
1-216-864-11
1-218-990-11
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
SHORT CHIP
1M
10K
10K
0
0
5%
5%
5%
1/16W
1/16W
1/16W
R689
R690
R691
R693
R707
1-218-990-11
1-216-864-11
1-218-990-11
1-218-990-11
1-218-957-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
RES-CHIP
0
0
0
0
2.2K
5%
1/16W
R708
R709
R710
R711
R712
1-218-957-11
1-218-957-11
1-218-965-11
1-218-965-11
1-218-965-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
2.2K
2.2K
10K
10K
10K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R713
R801
R802
R804
R805
1-218-953-11
1-218-961-11
1-218-990-11
1-218-933-11
1-218-933-11
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
1K
4.7K
0
22
22
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/16W
R806
R807
R808
R810
R811
1-218-961-11
1-218-957-11
1-218-957-11
1-218-990-11
1-218-965-11
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
4.7K
2.2K
2.2K
0
10K
5%
5%
5%
1/16W
1/16W
1/16W
5%
1/16W
R812
R813
R814
R815
R817
1-218-977-11
1-218-990-11
1-218-990-11
1-218-981-11
1-218-953-11
RES-CHIP
SHORT CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
100K
0
0
220K
1K
5%
1/16W
5%
5%
1/16W
1/16W
R818
R819
R820
R821
R822
1-218-957-11
1-218-953-11
1-218-945-11
1-220-804-11
1-218-989-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
2.2K
1K
220
2.2M
1M
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R823
R827
R829
R834
R835
1-218-965-11
1-218-941-11
1-218-990-11
1-218-985-11
1-208-943-11
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
METAL CHIP
10K
100
0
470K
220K
5%
5%
1/16W
1/16W
5%
0.5%
1/16W
1/16W
57
MZ-RH10
MAIN
Ref. No.
Part No.
Description
Remark
R836
R837
R841
R842
R843
1-208-927-11
1-218-957-11
1-218-929-11
1-218-973-11
1-218-957-11
METAL CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
47K
2.2K
10
47K
2.2K
0.5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R854
R857
R858
R860
R861
1-208-927-11
1-218-985-11
1-218-929-11
1-218-965-11
1-218-929-11
METAL CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
47K
470K
10
10K
10
0.5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R865
R866
R868
R872
R873
1-218-989-11
1-218-989-11
1-218-990-11
1-218-965-11
1-218-965-11
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
1M
1M
0
10K
10K
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/16W
R877
R878
R879
R880
R881
1-218-989-11
1-218-937-11
1-218-937-11
1-218-937-11
1-218-981-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
1M
47
47
47
220K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R882
R883
R884
R885
R886
1-218-985-11
1-218-989-11
1-218-985-11
1-218-989-11
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
470K
1M
470K
1M
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R887
R888
R890
R892
R893
1-218-977-11
1-218-981-11
1-218-981-11
1-218-981-11
1-220-804-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100K
220K
220K
220K
2.2M
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R894
R895
R897
R898
R899
1-218-977-11
1-218-977-11
1-218-990-11
1-208-935-11
1-218-990-11
RES-CHIP
RES-CHIP
SHORT CHIP
METAL CHIP
SHORT CHIP
100K
100K
0
100K
0
5%
5%
1/16W
1/16W
0.5%
1/16W
R903
R904
R906
R907
R908
1-218-989-11
1-218-989-11
1-218-973-11
1-218-965-11
1-218-969-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
1M
1M
47K
10K
22K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R910
R912
R914
R917
R918
1-218-969-11
1-218-981-11
1-208-911-11
1-218-981-11
1-218-985-11
RES-CHIP
RES-CHIP
METAL CHIP
RES-CHIP
RES-CHIP
22K
220K
10K
220K
470K
5%
5%
0.5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R920
R922
R923
R924
R925
1-218-985-11
1-218-977-11
1-220-804-11
1-218-985-11
1-208-927-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
470K
100K
2.2M
470K
47K
5%
5%
5%
5%
0.5%
1/16W
1/16W
1/16W
1/16W
1/16W
R926
R927
R929
R930
R933
1-208-935-11
1-208-683-11
1-208-935-11
1-208-927-11
1-208-943-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
1K
100K
47K
220K
0.5%
0.5%
0.5%
0.5%
0.5%
1/16W
1/16W
1/16W
1/16W
1/16W
R934
R935
R936
1-208-715-11 METAL CHIP
1-208-935-11 METAL CHIP
1-208-927-11 METAL CHIP
22K
100K
47K
0.5%
0.5%
0.5%
1/16W
1/16W
1/16W
Ref. No.
Part No.
Description
Remark
R937
R938
1-208-715-11 METAL CHIP
1-208-927-11 METAL CHIP
22K
47K
0.5%
0.5%
1/16W
1/16W
R939
R957
R960
R961
R962
1-218-977-11
1-208-943-11
1-218-990-11
1-220-803-81
1-218-990-11
RES-CHIP
METAL CHIP
SHORT CHIP
RES-CHIP
SHORT CHIP
100K
220K
0
4.7
0
5%
0.5%
1/16W
1/16W
5%
1/16W
R966
R967
R968
R969
R976
1-218-973-11
1-218-985-11
1-218-985-11
1-218-957-11
1-218-973-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
47K
470K
470K
2.2K
47K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R977
R4460
R6620
R6621
R6622
1-218-977-11
1-218-990-11
1-244-161-11
1-244-161-11
1-244-161-11
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100K
0
2.2
2.2
2.2
5%
1/16W
5%
5%
5%
1/16W
1/16W
1/16W
R6623
R6694
R6695
R8813
R8891
1-244-161-11
1-218-929-11
1-218-990-11
1-218-990-11
1-218-953-11
RES-CHIP
RES-CHIP
SHORT CHIP
SHORT CHIP
RES-CHIP
2.2
10
0
0
1K
5%
5%
1/16W
1/16W
5%
1/16W
R8892
1-218-953-11 RES-CHIP
1K
5%
1/16W
< SWITCH >
S890
S891
S892
S893
* S894
S895
1-786-691-21 SWITCH, PUSH (1 KEY) (PROTECT DETECT)
1-786-692-21 SWITCH, PUSH (1 KEY)
(HI-MD PROTECT DETECT)
1-762-946-12 SWITCH, PUSH (1 KEY) (HLAF LOCK)
1-762-805-21 SWITCH, PUSH (1 KEY) (OPEN/CLOSE DETECT)
1-786-079-21 SWITCH, PUSH (1 KEY)
(BATTERY INSERT DETECT)
1-762-078-11 SWITCH, SLIDE (HOLD)
< THERMISTOR >
58
THP401 1-805-580-11 THERMISTOR, POSITIVE
TH801 1-805-194-21 THERMISTOR, NTC (SMD)
< VARISTOR >
VDR8801 1-805-697-21 VARISTOR (SMD)
< VIBRATOR >
X801
1-813-353-21 VIBRATOR, CERAMIC (48MHz)
X802
1-795-728-21 VIBRATOR, CRYSTAL (22.5792MHz)
************************************************************
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
MZ-RH10
Ref. No.
Part No.
Description
Remark
MISCELLANEOUS
**************
A-1104-960-A SWITCH UNIT ASSY
X-2055-677-1 OP SERVICE ASSY (ABX-UJ)
(including HR601(OVER WRITE HEAD))
M701
8-835-782-12 MOTOR, DC SSM18D/C-NP (SPINDLE)
M702
1-787-143-11 MOTOR, DC (SLED)
M703
1-477-519-21 MOTOR UNIT, DC
(OVER WRITE HEAD UP/DOWN)
************************************************************
Ref. No.
507
509
Part No.
Description
Remark
1-417-577-11 CASE, BATTERY
1-400-878-11 FILTER, CLAMP (FERRITE CORE)
(for AC POWER ASAPTOR,
DEDICATED USB CABLE)
54
0 163
ACCESSORIES
************
1-400-877-11 FILTER, CLAMP (FERRITE CORE)
(for remote control, stereo micrphone,
line cable) (EXCEPT E, JE)
1-569-007-12 ADAPTOR, CONVERSION 2P (JE)
1-816-206-11 CONNECTOR, LIGHT (AEP, UK, E, EE, AUS)
1-816-206-21 CONNECTOR, LIGHT (HK, KR, JE)
2-588-601-11 MANUAL, INSTRUCTION (ENGLISH)
(EXCEPT KR)
0
2-588-601-21
2-588-601-31
2-588-601-41
2-588-601-51
2-588-601-61
MANUAL, INSTRUCTION (FRENCH) (CND, AEP)
MANUAL, INSTRUCTION (GERMAN) (AEP)
MANUAL, INSTRUCTION (SPANISH) (AEP, JE)
MANUAL, INSTRUCTION (DUTCH) (AEP)
MANUAL, INSTRUCTION (SWEDISH) (AEP)
2-588-601-71 MANUAL, INSTRUCTION (ITALIAN) (AEP)
2-588-601-81 MANUAL, INSTRUCTION (PORTUGUESE)
(AEP, JE)
2-588-601-91 MANUAL, INSTRUCTION (FINNISH) (AEP)
2-588-602-11 MANUAL, INSTRUCTION (CZECH) (EE)
2-588-602-21 MANUAL, INSTRUCTION (HUNGARIAN) (EE)
501
502
503
509
AC power adaptor
504
Remote control
505
Earphones
506
509
(EXCEPT E, JE)
Dedicated USB cable
NH-14WM Nickel metal
hydride rechargeable batery
Battery carrying case
507
Dry battery case
2-588-602-31
2-588-602-41
2-588-602-51
2-588-602-61
MANUAL, INSTRUCTION (POLISH) (EE)
MANUAL, INSTRUCTION (SLOVAKIAN) (EE)
MANUAL, INSTRUCTION (RUSSIAN) (EE)
MANUAL, INSTRUCTION
(TRADITIONAL CHINESE) (E, HK, JE)
2-588-602-71 MANUAL, INSTRUCTION
(SIMPLIFIED CHINESE) (JE)
0 501
0 501
2-588-602-81 MANUAL, INSTRUCTION (KOREAN) (KR, JE)
3-220-749-01 CASE, CARRYING
X-2050-995-1 CD-ROM (APPLICATION) ASSY
(SonicStage/MD Simple Burner)
1-478-846-11 ADAPTOR, AC (AC-ES3010K2) (US, CND)
1-478-847-11 ADAPTOR, AC (AC-ES3010K2) (KR)
0 501
0 501
0 501
0 501
502
1-478-848-11
1-478-849-11
1-478-850-11
1-478-853-12
1-479-321-11
503
503
504
505
505
506
ADAPTOR, AC (AC-ES3010K2) (AEP, E, EE)
ADAPTOR, AC (AC-ES3010K2) (UK, HK)
ADAPTOR, AC (AC-ES3010K2) (AUS)
ADAPTOR, AC (AC-ES3010K2) (JE)
REMOTE COMMANDER (RM-MC60)
8-912-742-91 EARPHONES MDR-E0931SPB9 SET (JE)
8-912-743-90 EARPHONES MDR-E808SPB19 SET
(EXCEPT JE)
1-830-472-11 CORD, CONNECTION (USB)
1-756-120-23 BATTERY, NICKEL HYDROGEN (NH-14WM)
(EXCEPT US, CND)
1-756-120-61 BATTERY, NICKEL HYDROGEN (NH-14WM)
(US, CND)
3-008-521-01 CASE, CHARGE
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
59
MZ-RH10
REVISION HISTORY
Clicking the version allows you to jump to the revised page.
Also, clicking the version at the upper right on the revised page allows you to jump to the next revised
page.
2
Ver.
Date
1.0
2005.03
Description of Revision
New