Download Philips 107e61

24
107E6 CRT
DDC Instructions (Continued)
Go to cover page
Step 6: Save DDC data
Sometimes, you may need to save DDC data as a text file for using
in other IC chip. To save DDC data, follow the steps below:
2. Access Factory Mode
1). Turn off monitor.
2). [Push "
"& "
" buttons at the same time and hold it
] + [Press power "
" button untill comes out "Windows screen"]
=> then release all button, then press
, wait until the OSD menu
with
Characters V32 107T6 V0.24 20040303 (below OSD menu) come on
the Screen of the monitor (see Fig. 23).
1. Click
(Save) icon (or click "file"-> "save as") from the tool bar
And give a file name as shown in Fig. 25.
The file type is EDID301 file (*.ddc) which can be open in WordPad.
By using WordPad, the texts of DDC data & table (128 bytes, hex
code) can be modified. If DDC TEXTS & HEX Table are completely
correct, it can be saved as .ddc flie to re-load it into DDC IC for DDC
Data application.
107T6
E
107T6-DDC
107T6-DDC
107E6-DDC
301
Fig. 25
Factory
Mode------------Indicator
2.
Fig. 23
3. Click
(Write EDID) icon from the tool bar to write DDC data.
Click Save.
Step 7: Exit DDC program
Pull down the File menu and select Exit as shown in Fig. 26.
Fig.24
4. Confirm Serial Number in User Mode
1) Press the
button to turn off the monitor. Press the
button
again to turn on the monitor.
2) Press the
button to bring up the OSD main menu.
3) Press the
button to select Extra Controls, press the
button to
confirm your selection.
4) Confirm the Serial Number ''TY 000812'' is updated as shown in
Fig. 25.
000812
Fig. 26